Where betaine is permitted, and what the file must show
Betaine is used as a food supplement ingredient in the EU, the US and the UK, but permission is not a single status: it depends on the form, the use level, the market and the label. The EU regulates it through general food law and a novel-food entry for specified uses; the US classifies it as a dietary ingredient; the UK applies retained supplement rules and its own registers. The file has to show the basis for the market, not just the CAS number.
A betaine file has to answer four questions — which form, at what level, under which ceiling, with what label and claim — and each market answers them in its own instrument.
Four checks, not one
The first check is whether the substance may be used in a supplement at all. The second is the level or restriction for that form and market, the third the contaminant ceiling, the fourth what the label and claims may say. A supplier who answers only the first has not answered the other three.
Betaine anhydrous and betaine hydrochloride have different CAS numbers, betaine contents and label names; a permission written for “betaine” does not automatically cover the salt.
European Union
Betaine is not a vitamin or a mineral, so it has no entry in Annex I or Annex II to Directive 2002/46/EC on food supplements. Its use is governed by general food law, by Regulation (EC) No 1925/2006, and by the food-supplement rules of the member state of sale. As of this review, betaine has no Annex III entry under Regulation 1925/2006, so it is not on the Union's prohibited or restricted list.
Betaine as specified in Commission Implementing Regulation (EU) 2019/1294 is an authorised novel food, and its entry in the Union list (Implementing Regulation (EU) 2017/2470) sets the permitted food categories, maximum levels and a label statement. That entry is not a general permission for every use or dose: a betaine supplement must be checked against the current Union list and the member state's supplement rules.
Regulation (EU) No 1169/2011 requires the ingredient list to name the form actually in the product: “betaine” and “betaine hydrochloride” are not interchangeable. The novel-food label statement, where it applies, sits beside the usual information.
United States
US law regards betaine as a dietary ingredient under DSHEA. The supplier should be able to state the basis: a history of use before 15 October 1994, or a new dietary ingredient notification. “It is already sold” is not a legal basis. The finished product is made under the dietary supplement cGMPs in 21 CFR 111.
The Supplement Facts panel declares the amount of the dietary ingredient. Where a salt is used, the panel and ingredient list should make clear whether the declared amount refers to the salt or to betaine, which differ by about 24% by mass. The ingredient list should name betaine hydrochloride when that is the form in the drum.
Structure/function claims are permitted with the DSHEA disclaimer and must not be disease claims. The FDA sets no federal maximum levels for lead, cadmium or mercury in dietary supplements; California Proposition 65 sets warning thresholds per day, and USP <2232> is a reference some buyers require.
United Kingdom
Great Britain applies the Food Supplements (England) Regulations 2003 and the equivalents in Scotland and Wales, with retained instruments on labelling, claims and contaminants. Northern Ireland follows the EU regime under the Windsor Framework, so one UK label may not work in all four nations.
Betaine is not a vitamin or mineral under the GB supplement rules, so the same general-food-law reasoning applies. GB has its own novel-food and health-claims registers; the EU entry is a reference, not automatic GB permission. Check the GB claims entry before artwork sign-off.
Contaminant limits
| Metal | Catalog limit | EU and GB supplements | US federal |
|---|---|---|---|
| Lead (Pb) | ≤3 mg/kg | 3.0 mg/kg | No maximum |
| Cadmium (Cd) | ≤1 mg/kg | 1.0 mg/kg | No maximum |
| Mercury (Hg) | ≤0.1 mg/kg | 0.10 mg/kg | No maximum |
| Arsenic (As) | ≤2 mg/kg | No harmonised EU/GB limit | No maximum |
The catalog limits are release limits; the EU figures are maxima under Regulation (EU) 2023/915, and GB applies the retained predecessor, Regulation (EC) 1881/2006. A catalog limit at or below the ceiling is a commercial choice, not a legal requirement; one above it would allow a failing lot to be released. Arsenic is where the columns diverge: no harmonised EU maximum, but a 2 mg/kg catalog limit.
The comparison only works on the same basis. A result per kilogram of powder and a limit per daily dose are different numbers, and a multi-ingredient product dilutes the raw material's contribution. Ask for the result, method and basis, then calculate the daily intake.
Label and claim boundaries
Under Regulation (EC) No 1924/2006 and the claims list in Regulation (EU) No 432/2012, betaine has an authorised health claim with narrow conditions: a minimum amount per portion, a stated daily intake, and a warning above a set level. The wording and figures sit in the register; this page does not restate them. A label that uses the claim must meet every condition; a label that goes beyond it is not covered. GB keeps a register drawn from the same list, so check the GB entry before sign-off.
In the US, a structure/function claim needs the DSHEA disclaimer and a scientific basis, and must not make a disease claim. The same discipline applies everywhere: describe the ingredient, amount and form, not an outcome. This page makes no function or disease claim for betaine.
“Anhydrous” is a form description, not a claim, and “trimethylglycine” is another name for the same molecule. The label should use one name consistently rather than alternate between them.
The file a brand should hold
- Specification and current COA for the lot, with assay basis, water, pH, mesh and contaminants.
- Technical data sheet and safety data sheet, with the form and CAS number on both.
- Novel-food status statement for the EU/GB use, and the dietary-ingredient basis for the US.
- Allergen, GMO, irradiation and animal-origin statements, signed and dated.
- Certificate of origin, manufacturer name and plant, and lot traceability.
- Heavy-metal and microbiological results with methods and limits.
- Stability summary for the pack and the matrix; approved artwork checked against the certificate.
A checklist before the first shipment
- Does the specification name the form and CAS number?
- Is the assay reported on the stated basis, with water beside it?
- Do contaminant results meet the destination's limits on the same basis?
- Is the novel-food or dietary-ingredient basis documented for the market?
- Does the label name the form in the drum?
- Is every claim on the artwork authorised, or absent?
- Do lot codes match on COA, pack and packing list?
- Are destination-specific documents signed and in date?
The market frameworks are summarised on the EU, US and UK regulatory pages. The COA page breaks the certificate down line by line; the form and label choice is on the form comparison page; the tests behind the identity claim are on the identity page. The product page carries the catalog specification.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation