06 Identity & adulteration

How we prove a vitamin C lot is L-ascorbic acid

Technical document 06 · Reviewed 2026-11-18 · Vitamin C

On this page
  1. The four layers
  2. Specific rotation: the stereochemistry check
  3. Spectroscopy, crystallinity and method limits
  4. The substitution routes
  5. What to write into the specification
  6. Questions to put to a supplier

Identity for vitamin C is a set of four answers, not one assay. The first is the molecule: L-ascorbic acid, CAS 50-81-7, the L enantiomer and not its epimer. The second is how much of it is present, and by which method. The third is the impurity profile: oxalic acid, iron, copper and the heavy metals. The fourth is the absence of undeclared material, whether a diluent, a sugar or a salt. A certificate that reports only the assay has answered the second question and left three open.

In one line

Identity is not the assay: specific rotation, the oxalic acid figure and the trace metals together separate L-ascorbic acid from a D-isoascorbic acid substitution or a diluted lot.

The four layers

The first layer is stereochemistry. Ascorbic acid has two enantiomers and several related structures; the vitamin identity and the specification belong to the L form. The second layer is quantity, and the method behind it: an iodometric titration measures reducing power, so the number can be right while the material is not. The third layer is the impurity profile, which catches a material that has been oxidised or contaminated on the route. The fourth is the diluent: a powder can be mostly ascorbic acid and still contain a carrier, a sugar or a salt that the label does not mention.

Each layer needs its own method, and the methods are not interchangeable. The rotation answers the first; the titration and the chromatogram answer the second; oxalic acid and the metals answer the third; pH and residue on ignition answer much of the fourth.

Specific rotation: the stereochemistry check

Specific rotation normalises the measured rotation for path length and concentration, so the figure is comparable only when the concentration, temperature and wavelength are stated. The specification fixes the concentration at 10% for that reason. For a pure substance the figure should not move when the concentration changes; a lot whose rotation drifts with concentration is telling you that something else in the sample is optically active.

Within that defined measurement, the rotation is the most direct discrimination between the L form and a stereochemical substitution. D-isoascorbic acid, also called erythorbic acid, is the epimer: a different molecule that also reduces iodine and can therefore pass an iodometric assay. It does not share the rotation. A lot that has been partly substituted will sit outside the window of +20.5° to +21.5°, and the further the substitution, the further outside it sits.

Spectroscopy, crystallinity and method limits

The catalogue identifies the material by IR and UV, and the specification says “conform” rather than giving a spectrum. That is normal for a monograph material: the comparison is against a reference spectrum, and the report should say which reference. IR shows the functional groups; UV shows the conjugated enediol system that gives ascorbic acid its absorbance. Neither test distinguishes the L form from the D form, and neither measures how much is present.

Identity tests · what each one can and cannot prove
TestProvesDoes not prove
IR and UV identificationThe functional groups and the chromophore match the referencePurity or stereochemistry
Iodometric titrationReducing power, expressed as ascorbic acidIntact molecule versus oxidised; which reductant
HPLCAscorbic acid separated from dehydroascorbic acid and related substancesIdentity of an unknown peak without a reference
Specific rotationThe L enantiomer, at the stated concentrationThe amount present
Oxalic acidThe organic-acid impurity levelWhether it came from the route or from storage
Iron and copperThe oxidation catalysts at parts-per-million levelThe rest of the heavy-metal panel

The solid form is described as crystals or a crystalline powder, and appearance is a visual check rather than a crystallographic one. X-ray diffraction is not part of the catalogue panel. If the solid form matters to your process — dissolution, compaction, blending — ask whether a diffraction pattern can be supplied for the lot, and ask what the detection limit is. A “not detected” answer without a limit is not an answer.

The substitution routes

The first route is the epimer. Erythorbic acid is a reducing substance with similar behaviour in the titration and a different rotation; it is the substitution that a certificate reporting only the assay will miss. The second route is dilution with a sugar or a starch. The assay falls, but a sugar can also be optically active, so a rotation that looks plausible is not proof of purity; the loss on drying, the residue on ignition and the oxalic acid figure have to agree with the assay. The third route is a salt sold as the acid: sodium ascorbate in place of ascorbic acid raises the pH of the 5% solution above the 2.1–2.6 window, raises the residue on ignition and lowers the assay expressed as C₆H₈O₆. The fourth route is not a substitution but an age problem: an oxidised lot can still titrate inside the range near the lower limit while the colour and the oxalic acid figure have already moved.

Each route has a different signature, which is why one test is never enough. The epimer moves the rotation; the sugar moves the assay and the residue; the salt moves the pH and the residue; oxidation moves the colour, the oxalic acid and the chromatographic result. A specification that carries all four layers can be rejected against; a specification that carries only the assay cannot.

What to write into the specification

  • “L-ascorbic acid, crystalline; CAS 50-81-7; assay 99.0–100.5% by iodometric titration.”
  • “Identification: IR and UV conform to the reference.”
  • “Specific rotation +20.5° to +21.5° on a 10% solution.”
  • “Oxalic acid ≤0.2%; iron ≤2 ppm; copper ≤5 ppm.”
  • “Heavy metals Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg; microbiology APC ≤1,000 cfu/g, yeast and mould ≤100 cfu/g, E. coli and Salmonella absent.”
  • “HPLC result for ascorbic acid and dehydroascorbic acid on request.”

The list is longer than an assay line because identity is not one measurement. A specification that names the rotation and the impurity panel gives a laboratory something to reject against; a specification that names only the assay leaves the other three layers to the supplier's judgement.

Questions to put to a supplier

  1. What is the specific rotation on this lot, and at what concentration was it measured?
  2. Which assay method was used, and is there an HPLC result for dehydroascorbic acid?
  3. What are the oxalic acid, iron and copper figures on the same lot?
  4. Does the certificate name the CAS number and the crystalline form?
  5. If the material is not the catalogue grade, what exactly has been substituted or added?

The COA page shows where these figures sit on the certificate; the grade page covers the forms; the HPLC method explains the separation that the titration cannot make; the vitamin C hub carries the catalogue specification.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation