Where thiamine hydrochloride is permitted, and what the file must show
Thiamine hydrochloride is a permitted vitamin B1 source for food supplements in the EU, the US and the UK. Permission is the first check: the file also has to show that the lot meets the specification, that the label uses the permitted name and units, and that any claim on the pack is one the market allows. A compliant lot with a non-compliant label is still a non-compliant product.
The form is permitted in all three markets; the file still has to show that the lot, the label and the claim agree.
Four checks, three markets
A market file is four checks: is the form permitted, does the lot meet the level and contaminant limits, does the label use the permitted name and units, and is the claim permitted? The three markets share the first answer and differ on the rest. This is a sourcing reference, not legal advice; the instruments can be amended, so check the current text before artwork.
| Market | Permission route | Main instruments |
|---|---|---|
| EU | Vitamin B1 source on the food-supplement positive list | Directive 2002/46/EC; Regulation (EU) No 1169/2011 |
| US | Dietary ingredient under DSHEA; GRAS affirmation for food use | 21 CFR 184.1875; 21 CFR 111; 21 CFR 101.36 |
| UK | Retained permitted-forms list for food supplements | Food Supplements (England) Regulations 2003 |
The EU route
Directive 2002/46/EC lists the vitamins and the forms permitted in food supplements. Annex II, Part A, item 5 names “thiamin hydrochloride” and “thiamin mononitrate”, using the Directive's spelling. The hydrochloride is therefore on the positive list as a source, and the mononitrate is a separate entry. The route is the food-supplement list, not a novel-food entry, and the carrier must be a permitted food ingredient.
Regulation (EU) No 1169/2011 sets the label: thiamine is declared in milligrams per portion and as a percentage of the nutrient reference value of 1.1 mg, with the supplement particulars and the daily-dose warning. The ingredient list uses the Annex II name of the salt that is actually present. Contaminants are governed by Regulation (EU) 2023/915, which sets lead at 3.0 mg/kg, cadmium at 1.0 mg/kg and mercury at 0.10 mg/kg for food supplements. There is no harmonised EU maximum for total arsenic in supplements, so the specification sets one.
The EU does not harmonise maximum vitamin levels, so a member state can apply its own national rule.
The US route
In the United States, thiamine hydrochloride is a dietary ingredient under DSHEA and was marketed before 15 October 1994, so the pre-1994 route applies rather than a new dietary ingredient notification. For food use, 21 CFR 184.1875 affirms thiamine hydrochloride as GRAS, and 21 CFR 184.1878 covers the mononitrate. The finished supplement is made under 21 CFR 111, which requires identity testing of each component and supplier qualification.
The Supplement Facts panel follows 21 CFR 101.36. Thiamine is declared in milligrams against a Daily Value of 1.2 mg, and the source is named in the ingredient list as thiamine hydrochloride. A structure/function statement needs the DSHEA disclaimer and must not be a disease claim.
No federal lead maximum exists for supplements, so US buyers set their own and check state exposure rules such as California's Proposition 65. The supplier's certificate supports the buyer's identity test; it does not replace it.
The UK route
Great Britain retains a permitted-forms list copied from the EU lists and amended since. The Food Supplements (England) Regulations 2003, with parallel instruments in Scotland and Wales, list the vitamins and forms that may be used, and thiamin hydrochloride is on the list. The label carries the UK supplement particulars and a nutrient reference value of 1.1 mg.
Contaminant limits were carried over at the EU values, and the GB claims register lists the permitted wording. Northern Ireland applies EU rules under the Windsor Framework, so a GB-only check is not enough for a product sold across the UK. Re-read the current text before the artwork is final.
The limits in the file
| Parameter | Catalog limit | What the market file needs |
|---|---|---|
| Lead | ≤3 mg/kg | Result against the 3.0 mg/kg EU supplement limit; check any national or state rule |
| Arsenic | ≤2 mg/kg | No harmonised EU supplement maximum; the buyer sets the limit |
| Cadmium | ≤1 mg/kg | Result against the 1.0 mg/kg EU supplement limit |
| Mercury | ≤0.1 mg/kg | Result against the 0.10 mg/kg EU supplement limit |
| Water | ≤5.0% | Result and basis, because water changes the as-is potency |
| Nitrate | Passes test | Method and result; the nitrate test separates the hydrochloride from the mononitrate |
| Sulfated ash | ≤0.1% | Result, as an indicator of inorganic residue |
| Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Method and result for each test |
These are catalog limits, not a statement that every market applies the same legal maximum. The certificate shows the result; the file maps it to the ceiling for the destination. The nitrate limit is a pharmacopoeial identity guard, not a contaminant ceiling.
Where the claim boundary sits
In the EU, Regulation (EC) No 1924/2006 and the EU Register govern claims. A claim may be used only if it is on the Register, matches its conditions of use and is not a disease claim. Authorised claims exist, but this page does not reproduce them; the brand's review decides whether one is available for its product and dose.
In the US, a structure/function statement needs the DSHEA disclaimer and must not be a disease claim. In the UK, the GB register governs, and an EU-authorised claim is not automatically available in Great Britain. The ingredient name is not a claim: “thiamine hydrochloride” and “98.5–101.5%” are specification terms. This supplier makes no health claim, and the brand owner is responsible for every statement on the pack.
The document set
| Document | What it should establish |
|---|---|
| Certificate of analysis | Lot code, assay and basis, water, pH, nitrate, sulfated ash, particle size, contaminants, micro |
| Technical data sheet and specification | Identity, CAS, formula, solubility, storage, particle size, pack, release limits and stability summary |
| Safety data sheet | Hazard classification, handling, transport |
| Manufacturing flow chart | The process, the solvents and the points of control |
| Allergen, non-GMO and origin statements | The status of the material, the carriers and the lot chain |
The pre-order checklist
- The specification names thiamine hydrochloride, CAS 67-03-8, with the assay on the dried basis and a water limit.
- The nitrate test is on the certificate, and the pack states the salt.
- The contaminant results are compared with the destination's limits, not only the catalog.
- The label names the Annex II form and declares thiamine in the required unit.
- The claim, if any, is on the applicable register and is not a disease claim.
- The lot code on the certificate matches the pack and the retained sample.
The permitted forms and the label wording are covered on the grade page; the certificate lines are on the COA page; the salt tests are on the identity page. The market instruments are indexed in the EU regulatory note, and the product hub carries the catalog specification.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation