Vitamin A: MOQ, packaging and ordering
The entry order is a 1 kg foil pouch of the 500,000 IU/g acetate powder; production runs use the 25 kg fiber drum. The pouch is a released pack with its own lot certificate, so it can carry a trial, a carrier check and a label review. Standard lead time is 1–7 days once the specification and the documents are fixed.
A single kilogram covers the qualification work — assay, carrier check, trial — before a production order.
Why the minimum is 1 kg
A 1 kg pack is large enough to run a blend trial, fill a small capsule or tablet batch, check the carrier against the intended matrix and keep a retained sample. It is also small enough to be drawn from a production lot rather than from a separate hand-made batch. That last point matters: a sample from the lot you will buy tells you about that lot, while a special “sample batch” tells you only what the plant can do when it is not under production pressure.
The minimum is not a marketing threshold. It is the smallest unit that can be labelled and traced with a lot code, a certificate and a retained sample without repacking in a way that breaks the chain. Below 1 kg, the material usually has to be subdivided, and subdivision adds a handling step that the certificate does not describe.
The two standard packs
The 1 kg foil pouch is the trial and small-production pack; the 25 kg fiber drum is the production pack. Each is opaque while closed, and each depends on its seal or lid. The pouch should be resealed after opening and the drum should be closed between uses; neither pack is designed to hold an open surface for a long period.
The pack label should repeat the essentials: product name, ester, IU/g, carrier, lot code, net weight, dates and storage condition. If the material is repacked, the new pack has to keep the lot identity and the original certificate. Transferring powder into a clear jar for convenience removes the light barrier and is not a storage pack.
Ask for the pack dimensions and the pallet configuration if the material is going into a production line with limited headroom. A 25 kg drum is a handling unit as well as a container; its lid and label are part of the pack record.
Lead time and what starts the clock
The standard lead time is 1–7 days for a catalog pack held in stock. The clock starts when the purchase order, the specification version and the document requirements are agreed, not when the first email is sent. A custom IU, a different carrier, a special mesh or an added document set can move the order out of the standard window, and the quotation should say so.
The 1–7 days is a dispatch window, not a delivery promise; transport, customs and the buyer's goods-inward tests run on separate clocks. For a first shipment, allow time for the certificate review and a sample check before the material is released to production. If the line is running to a fixed date, tell the supplier the date at the quotation stage rather than after the order.
The six details a quotation needs
| Item | Why it changes the quotation |
|---|---|
| Ester and grade | Retinyl acetate and retinyl palmitate are different materials, and the IU/g has to be stated |
| IU/g and basis | The figure, the method and whether it is as sold or on the dried basis |
| Carrier and gelatin source | Gelatin, sucrose and starch proportions, and the gelatin origin for the label |
| Pack and quantity | 1 kg pouch or 25 kg drum, and the number of units |
| Destination and delivery terms | The market, the address and the Incoterms decide the logistics line |
| Documents and special requirements | COA, TDS, SDS, allergen, GMO, vegan, halal or kosher statements |
A quotation that answers only the first and fourth lines is a pack quotation, not an offer for a specification. The other four lines are where a like-for-like comparison is won or lost.
Samples and qualification
The sample should come from the lot allocated to the order, not from a separate stock kept for samples. The sample label should carry the same lot code as the certificate and the commercial pack. Test the assay, the loss on drying, the particle size and the carrier behaviour in your own matrix; a certificate review alone does not show how the powder flows on your line.
Keep part of the sample as a retained reference. If a later delivery differs in colour, flow or dispersion, the retained sample is the comparison that makes the conversation specific. For a regulated market, the sample should be stored under the same conditions as the production material so that the comparison is meaningful.
Terms worth agreeing before the order
The specification version, the IU basis, the overage policy and the acceptance tolerances should be in the purchase order, not only in the certificate. Agree what happens if a lot falls outside the specification, who pays for the return and how a replacement lot is released. Agree the retained-sample period and the document set that ships with each lot.
Commercial terms such as payment, delivery and Incoterms belong in the quotation and the contract. This page does not quote a figure; it sets out the units and the information that make a quotation comparable. The catalog ranges are listed on the vitamin A product page; the certificate lines are on the COA page; the market file is on the compliance page; and storage is on the stability page. The MOQ glossary entry and the RFQ template can be used to build the request.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation