02 Grades & mesh

Sodium ascorbate grades: mesh, granulation and release basis

Technical document 02 · Reviewed 2026-11-20 · Sodium Ascorbate

On this page
  1. One salt, several physical grades
  2. The grades side by side
  3. What changes in the drum
  4. Which grade fits which dosage form
  5. What to write into the specification

Sodium ascorbate is supplied as an 80 mesh powder, a granulated powder and, on request, a finer powder. All three are the same salt, CAS 134-03-2, with the same 99.0–101.0% assay on the dried basis; the grade is fixed by particle size, flow, bulk density and dust. The compendial question is separate: a catalogue grade and a pharmacopoeial grade can share the chemistry and differ on pH and loss on drying.

In one line

A grade is a physical specification plus an assay basis: mesh, flow, moisture limit and the release method decide whether the same salt fits a capsule, a stick pack or a blend.

One salt, several physical grades

The molecule is fixed; the powder is not. Crystallisation, drying and milling decide the particle-size distribution, and the distribution decides how the powder moves. A capsule filler wants flow and a consistent bulk density; a stick pack wants low dust and quick dissolution; a tablet wants a compressible granule; a dry blend wants particles that do not segregate away from the other actives.

The assay, pH and moisture limits stay the same between those physical grades unless the buyer asks for a different release specification. What changes is the behaviour in the plant, and that is what a line trial is testing.

The other axis is the release specification. The catalogue is a commercial specification; a pharmacopoeial monograph is a separate document with its own pH and loss-on-drying windows. A buyer who needs the monograph should say so before the quotation, because the two are not interchangeable at release.

The grades side by side

Sodium ascorbate grades and what changes in the plant
GradeParticle sizeFlow and dustTypical useWhat to check
Standard powder≥95% through 80 meshFree-flowing; some dustCapsules, tablets, dry blendsMesh, bulk density, loss on drying
GranulatedCoarser, agreed on requestLow dust; good flowStick packs, tableting, blendsGranule size, friability, dissolution
Fine powderFiner cut, agreed on requestDust and staticLiquid mixes, coatingsDissolution, dust control
Compendial gradeSame physical optionsAs aboveMarkets requiring a monographpH 7.0–8.0, loss on drying ≤0.25%, method

Read the table by column. The particle size decides the flow and the dust; the use column names the common fit; the last column lists the lines that change when the grade changes. A granulated grade is not a higher grade, and a fine powder is not a purer one.

What changes in the drum

Particle size is the first physical line. The standard grade passes 80 mesh, which is coarse enough to flow and fine enough to dissolve in a stick pack. A granulated grade builds those crystals into larger agglomerates; it flows better and makes less dust, but it dissolves more slowly and its bulk density is different.

Bulk density and flow are not on the catalogue certificate, yet they decide whether a capsule filler runs at speed or the fill weight drifts. Ask for them when the process is sensitive. Dust is the third line: a fine powder dissolves fastest and is the hardest to handle, and static can make it cling to the blender wall.

Moisture behaves the same way in every grade. Sodium ascorbate is hygroscopic, and the catalogue limit is loss on drying ≤0.5%. A granule with more surface area can pick up water faster in an open room, and caking is the visible result. The pack and the in-use period are part of the grade decision.

Appearance is white to off-white. A yellow or brown tint is an oxidation signal, not a grade difference, and it should be investigated on any grade.

Which grade fits which dosage form

For a capsule or a tablet, the standard 80 mesh powder is the usual starting point: it is dense, it flows, and the dose fits a normal fill weight. A high-speed capsule filler may run better on the granulated grade, and a direct-compression tablet may need the granule for compressibility.

For a stick pack or a drink mix, the granulated grade keeps the dust down and the standard grade dissolves quickly; the choice is a trial, not a rule. The salt tastes salty rather than sour, and the sodium declaration moves with the dose. For a liquid, the fine grade dissolves fastest, but the solution is the least stable format and the process has to protect it.

For a dry blend with an acid-sensitive active, the salt's pH of 6.5–7.5 is the reason to use it. The same neutrality is a disadvantage in solution, where the ascorbate oxidises faster than at acid pH. The dosage form decides which effect matters.

What to write into the specification

  • “Sodium ascorbate (monosodium L-ascorbate), CAS 134-03-2, C6H7NaO6.”
  • “Assay 99.0–101.0% on the dried basis by iodometric titration; HPLC result on request.”
  • “Identification by IR and titration; sodium by ICP-OES where the salt form is confirmed.”
  • “pH 6.5–7.5 in a 10% solution; loss on drying ≤0.5%.”
  • “Particle size ≥95% through 80 mesh; bulk density and flow where the filler needs them.”
  • “Heavy metals and microbiology as listed; pack, retest period and release specification named.”

The product page carries the catalogue specification. The vitamin C hub carries the acid. The salt-versus-acid comparison is on sodium ascorbate versus ascorbic acid; the release tests are on the COA page; the market framework is on the compliance page; the sieve and particle methods are described under methods; the release workflow is on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation