05 Compliance

The regulatory file for retinyl palmitate

Technical document 05 · Reviewed 2026-11-20 · Retinyl Palmitate

On this page
  1. What the file contains
  2. European Union
  3. United States
  4. United Kingdom
  5. Contaminant and microbiological limits
  6. Claims and the label boundary
  7. The document set
  8. Checklist before the first order

Retinyl palmitate is a vitamin A ester supplied as a 1.0–1.1 MIU/g powder on a carrier. The supplier's file proves the material, the lot and the specification; the destination file proves the route, the level and the label for the finished product. The buyer's regulatory team confirms that route for the market where the product will be sold, and the brand owner owns the finished label.

In one line

The material file proves the ester and the lot; the destination file proves the route, the level and the label.

What the file contains

The file has four parts: the specification for retinyl palmitate, the certificate that releases the lot, the destination rules for the finished product, and the change-control record for source, carrier and pack. The certificate and the technical data sheet describe the material. Neither of them settles the market route, which is a separate decision recorded by the buyer.

The ester is the first line of the file. Retinyl palmitate, retinyl acetate, retinol and beta-carotene are different ingredients with different CAS numbers, analytical standards and label names, even though all can contribute vitamin A activity. A file that proves “vitamin A” without naming the ester does not prove the ingredient purchased. This page does not assert that the product is authorised as a novel food, a new dietary ingredient or a permitted ingredient in any market; it lists the framework and the documents the buyer needs to confirm that route.

European Union

For the EU, the relevant framework is Directive 2002/46/EC on food supplements; Annex II, Part A sets out the vitamin A forms that may be used, and the buyer's regulatory team checks the current list against the form on the certificate. Labelling follows Regulation (EU) No 1169/2011 and the supplement-specific provisions, with vitamin A declared in µg RE per portion against an 800 µg RE nutrient reference value.

The EU does not set one harmonised maximum for vitamin A in food supplements; several member states apply national rules, so the destination market has to be checked. Contaminants are governed by Commission Regulation (EU) 2023/915; the metal limits in the table below are catalog release limits, and the destination text is checked separately. Arsenic is a specification limit here, not a general EU supplement maximum. Check the current consolidated text as of this review before relying on a limit.

United States

In the US, the file has to support the dietary-ingredient status that the supplier relies on and the use the buyer intends. The supplier names that basis; the buyer checks it extends to the finished product and the label. Manufacturing sits under the dietary supplement cGMP (21 CFR 111), and the finished label uses the Supplement Facts format in 21 CFR 101.36.

Vitamin A is declared in mcg RAE against a Daily Value of 900 mcg RAE, with the source in parentheses, for example “Vitamin A (as retinyl palmitate)”. The carrier and any antioxidant are listed as other ingredients. There is no federal heavy-metal maximum for dietary supplements, so the buyer sets the specification; California's Proposition 65 adds a separate lead-warning route. A disease claim would turn the product into a drug, so the label review has to police that boundary.

United Kingdom

Great Britain retains the EU supplement framework through the Food Supplements (England) Regulations 2003 and the devolved equivalents. Vitamin A is declared in µg RE against the 800 µg RE nutrient reference value, and claims follow the GB register. Northern Ireland applies the EU rules, including the EU labelling and contaminant framework, so a pack sold across the UK can face two registers.

The delivery address decides which route applies; record that decision with the order and keep it beside the label and certificate. The form and the carrier do not change at the border; the label wording and the claim evidence may.

Contaminant and microbiological limits

Catalog release limits · retinyl palmitate powder
ParameterLimitBasis
Lead (Pb)≤3 mg/kgCatalog limit; EU supplement limit to confirm
Arsenic (As)≤2 mg/kgSpecification limit; no general EU supplement maximum
Cadmium (Cd)≤1 mg/kgCatalog limit; EU supplement limit to confirm
Mercury (Hg)≤0.1 mg/kgCatalog limit; EU supplement limit to confirm
MicrobiologyAPC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absentCatalog specification

These are release limits for the raw material, not a finished-product exposure calculation. The buyer converts the result to the daily dose and checks it against the destination rule. The batch COA confirms the measured figure for each lot; a limit without a result is only half of the evidence.

Claims and the label boundary

The supplier makes no claim for the ingredient. In the EU and the UK, any vitamin A claim must come from Regulation (EC) No 1924/2006, meet its conditions and hold for the finished product at the declared portion. Nutrient content claims such as “source of vitamin A” have their own thresholds, 15% of the nutrient reference value per portion, and those are a labelling calculation rather than a property of the powder.

In the US, a structure/function statement is the brand owner's statement. It must be truthful, must not be misleading, must carry the DSHEA disclaimer and must not cross into a disease claim. The supplier's documents describe composition and purity only. This page does not restate claim wording; the brand owner takes the wording from the current register and keeps the evidence for the finished product.

The document set

Documents that support a retinyl palmitate ingredient file
DocumentWhat it should show
Certificate of analysisLot results against the specification, with methods and basis
Technical data sheetIdentity, IU/g, carrier, solubility, mesh and storage
Safety data sheetHandling, transport and exposure information
SpecificationAgreed limits, IU basis and version
Carrier statementCarrier identity, ratio and source
Allergen and GMO statementsThe allergen risk and the GMO status of the carrier
Antioxidant declarationIdentity and level, if an antioxidant is present
Stability summaryThe pack, the conditions and the assigned retest period

The carrier statement deserves its own line. Gelatin brings an allergen and a dietary question, sucrose matters for a sugar claim, and starch can raise a gluten question. The certificate alone rarely answers these, so ask for the statement in writing and keep it with the specification version that governed the lot.

Checklist before the first order

  1. The specification names retinyl palmitate, the CAS number and the IU/g.
  2. The COA carries the same lot code as the pack and the retained sample.
  3. The carrier, its ratio and its source are declared.
  4. The IU/g is converted to µg RE or mcg RAE on the label basis used in the market.
  5. The contaminant and microbiology results are on the certificate, with methods.
  6. The destination route and any member-state limit are recorded.
  7. Any claim comes from the current register for the destination and is supported for the finished product.
  8. The stability summary matches the pack and the matrix that will ship.

The retinyl palmitate product page carries the catalog specification; the vitamin A page covers the acetate range; the analytical methods library describes the assays; the quality page describes release. The identity page lists the tests that prove the ester.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation