How we prove a sialic acid lot is NANA
The free sugar is confirmed when four independent lines point the same way: the paperwork names N-acetylneuraminic acid and CAS 131-48-6, HPLC retention and IR match the reference, the mass balance closes with water and related substances, and a hydrolysis check finds no bound form. The assay alone cannot separate the free sugar from sialyllactose diluted into the same powder. The hydrolysis check is the direct test for that substitution.
Identity is the agreement of four measurements: retention and IR name the molecule, the mass balance closes the powder, and hydrolysis shows whether any of the sialic acid arrived bound to lactose.
The identity layers
Each layer answers a separate question. A supplier who supplies only the first has described a document, not a powder. The paperwork is necessary because the form and the CAS number must be fixed before any test can be judged against them; the analytical layers then test the claim from different directions.
| Layer | Question | Test | What it proves |
|---|---|---|---|
| Paperwork | Is the form named, with its CAS number? | Name, CAS 131-48-6, formula | Only that the document is consistent |
| Chromatography and IR | Is the molecule N-acetylneuraminic acid? | HPLC retention and IR spectrum | The molecule, not its source |
| Mass and structure | Does the mass fit the structure? | LC-MS or NMR where needed | The structure of the sugar acid |
| Balance and hydrolysis | Is the powder wet, diluted or bound? | Assay, water, related substances, hydrolysis | The quantity and the form |
The free-to-bound ratio
The most useful ratio for this product is the one between the free sugar and the total sugar released by hydrolysis. N-Acetylneuraminic acid is a nine-carbon sugar acid with a molecular weight of 309.27. Sialyllactose is a disaccharide of sialic acid and lactose with a molecular weight near 633.55, so only about 48.8% of its mass is sialic acid. The two figures are not interchangeable, and a “sialic acid” result on a sialyllactose lot depends on whether the laboratory hydrolysed the sample first.
Run the assay twice: once on the sample as received and once after acid or enzymatic hydrolysis. A free N-acetylneuraminic acid lot shows little or no increase, because the sugar is already free. A sialyllactose lot shows a large increase, from near zero free sugar to roughly 49% of the sample mass. A blend falls between the two in proportion to its bound fraction. This is the test that separates a genuine free-sugar lot from a powder that carries the same word on the label but a different molecule in the drum.
The ratio also catches a dilution that the assay alone might miss. If the powder contains 48% free sialic acid and 52% maltodextrin, the assay falls to about half, but a supplier may still describe it as “sialic acid”. The hydrolysis ratio, the water figure and the related-substance profile together show whether the remainder is water, a carrier or a bound form.
What XRD can and cannot show
XRD asks whether the powder is crystalline and whether the pattern matches a reference. A crystalline free-sugar lot gives sharp reflections; a spray-dried or heavily diluted powder can give a broad halo or the pattern of a crystalline carrier. That makes XRD useful for detecting crystalline diluents such as lactose, glucose or mannitol, and for comparing two sources that should be the same solid form.
XRD measures neither purity nor the counter-ion, and it says nothing about the source. It also needs a reference pattern and a stated detection limit before a “match” statement means anything. For a disputed lot, XRD is strongest as one of several lines, not as a stand-alone release test. Ask for the pattern and the reference, not only the conclusion.
What adulteration looks like
| Adulterant | What it changes | Signal | Test |
|---|---|---|---|
| Sialyllactose | Bound sugar; lower free assay; lactose present | Free assay low; large rise after hydrolysis | HPLC before and after hydrolysis |
| Lactose, glucose or maltodextrin | Dilution; lower assay; higher water or ash | Assay low; extra HPLC peaks; XRD carrier pattern | HPLC, water, XRD |
| Water | Lower as-is assay; caking | Water above 5.0%; dried-basis assay normal | Karl Fischer |
| Dairy extract | Milk protein and N-glycolylneuraminic acid | Milk allergen positive; Neu5Gc peak | ELISA, HPLC or LC-MS |
| Egg-yolk powder | Protein and lipid load; egg allergen | Protein residue; off-white to yellow colour | Protein assay, ELISA, IR |
Appearance is the least reliable of the signals. White to off-white covers a wide range, and a carrier can reproduce it. The stronger signals are the hydrolysis ratio, the water figure, the related-substance profile and the source-specific allergen or marker test. A certificate with appearance and assay but no hydrolysis result has not tested the substitution that matters most here.
Writing identity into the specification
- “N-Acetylneuraminic acid, CAS 131-48-6, C11H19NO9, molecular weight 309.27.”
- “Identification by HPLC retention and IR spectrum, both against a reference standard.”
- “Assay ≥98.0% by HPLC, with the basis and the detection method named.”
- “Water ≤5.0% by Karl Fischer; pH 2.0–3.5 at 1% w/v.”
- “No bound sialyllactose above the agreed limit, checked by hydrolysis and re-assay.”
- “Source, allergen statement and any N-glycolylneuraminic acid limit stated for the lot.”
- “Destination and form settled before the order.”
Questions to put to the supplier
- Which form is this lot, and does the certificate name N-acetylneuraminic acid and CAS 131-48-6?
- Will you send the HPLC chromatogram and the IR spectrum, not just the assay figure?
- Was the sample hydrolysed before the assay? What was the free-sugar result before hydrolysis?
- What is the water result by Karl Fischer, and which basis was used for the assay?
- What is the source, and which allergen and source-marker tests support the statement?
A supplier who answers those five questions has supplied an identity file; one who answers only the assay has supplied a number. The product hub gives the catalog values. For the certificate layout, see the COA page; for the source and form choice, see the grades page; for the bound-form comparison, see the sialic acid versus sialyllactose page. The beta-glucan page is a parallel case of a specialty ingredient whose identity depends on source and structure; the HPLC method note describes the separation, and the quality page covers the release file.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation