02 Optical forms

R-alpha-lipoic acid grades: optical form, mesh and blend

Technical document 02 · Reviewed 2026-11-20 · R-Alpha-Lipoic Acid

On this page
  1. Why the same molecule is sold as two grades
  2. The two grades side by side
  3. Melting point, mesh and handling
  4. Dose arithmetic across the grades
  5. What to write into the specification
  6. When the other grade is the right choice

R-alpha-lipoic acid is the single R enantiomer, CAS 1200-22-2, specified at 99.0–101.0% by HPLC, melting at 46–50 °C and milled to ≥95% through 80 mesh. The racemic grade, CAS 1077-28-7, is a roughly 1:1 mixture of the R and S forms and melts at 60–62 °C; it shares the formula but not the optical composition, so it carries a different specification, a different label name and about half the R content per milligram. The grade decision is an optical decision before it is a particle-size one.

In one line

The two grades share a formula but not a specification: the optical form sets the assay, the rotation, the melting point and the R content of every milligram.

Why the same molecule is sold as two grades

Alpha-lipoic acid has one stereocentre, at the ring carbon that carries the pentanoic acid chain, so the molecule exists as two mirror-image enantiomers. Where the centre is left uncontrolled, both enantiomers appear in equal amount; controlling it, or resolving the mixture afterwards, gives the R grade. The connectivity is identical, so the formula, the molecular weight of 206.33 and the 31.1% sulfur figure describe both grades equally well.

The racemic grade is the simpler manufacture and the form the wider category has used; the R grade needs the unwanted S enantiomer separated or never formed, which is why its specification carries an optical line the racemic grade does not need. Neither grade is a diluted or coated version of the other. They are two purchase items with two CAS numbers, and a purchase order that names “alpha-lipoic acid” without the optical form has specified neither.

Switching grade changes four things at once: the CAS number, the melting point, the optical evidence on the certificate and the name that goes on the label. It also changes the mass that delivers a declared R amount, which is the arithmetic that catches most label errors.

The two grades side by side

R-alpha-lipoic acid against racemic alpha-lipoic acid
PropertyR gradeRacemic grade
CAS number1200-22-21077-28-7
Formula and molecular weightC8H14O2S2, 206.33C8H14O2S2, 206.33
Optical compositionThe R enantiomer; the (+)-formR and S, about 1:1
Assay by HPLC99.0–101.0%99.0–101.0%
Specific rotation+110° to +125° (c = 1, ethanol)No net rotation
Melting point46–50 °C60–62 °C
Particle size≥95% through 80 mesh≥95% through 40 mesh
Label nameR-alpha-lipoic acidAlpha-lipoic acid
R content per 100 mgAbout 99.5 mg at 99% eeAbout 50 mg

Melting point, mesh and handling

The melting point is the most practical difference in the warehouse. A solid that melts at 46–50 °C is soft on a hot day, and a drum that has been through a warm loading bay can arrive caked or sintered while the assay still passes. The racemic grade, melting at 60–62 °C, has more headroom but is not immune. Storage conditions belong in the specification for both grades, and the R grade is the one that needs the conversation first.

Particle size is a separate line. The R grade is milled to ≥95% through 80 mesh, which gives a finer powder than the racemic grade at 40 mesh: better for a small capsule fill or an even blend, more dust and more static in handling. Granulation is available on request and changes the flow and the sieve result, not the chemistry. Neither the mesh nor the granulation tells the reader anything about the optical form.

Solubility is common to both: slightly soluble in water, soluble in ethanol and in fats. That profile suits a capsule, a tablet or an oil-based blend and it does not suit a clear aqueous drink without a solubiliser. Colour is the weakest signal on either sheet. Yellow to pale yellow covers a visible range, and a darker lot can reflect light or heat exposure with an unchanged assay.

Dose arithmetic across the grades

Enantiomeric excess compares the two enantiomers as a share of their total. At 99% ee a lot is roughly 99.5% R with 0.5% S, and a label that declares an R amount depends on that exact figure rather than on the round 99%. The delivered R in a serving is the powder mass multiplied by the assay and by the R share; leaving out either factor overstates the label.

Delivered R enantiomer at a declared label amount
Weighed materialAssayR shareDelivered R
100 mg racemic alpha-lipoic acid99.0–101.0%About 50%About 50 mg
100 mg R-alpha-lipoic acid at 99% ee99.0–101.0%About 99.5%About 99 mg
100 mg R-alpha-lipoic acid at 100% ee99.0–101.0%100%About 100 mg
50 mg of R to be declared99.0–101.0%About 50% racemicNeeds about 100 mg racemic

The arithmetic is not a dose recommendation. It keeps the panel, the weigh-up and the certificate in agreement, and it explains why a formula converted from racemic to R without a new label check ends up declaring twice the R it used to deliver. An overage is a separate decision for the formulator, supported by the stability file for the finished product.

What to write into the specification

  • “R-alpha-lipoic acid, CAS 1200-22-2, C8H14O2S2, molecular weight 206.33.”
  • “Assay 99.0–101.0% by HPLC, with the basis stated; loss on drying ≤0.5%.”
  • “Specific rotation +110° to +125° at c = 1 in ethanol, and the chiral result if an ee limit is written.”
  • “Melting point 46–50 °C; identification by infrared and HPLC.”
  • “Particle size ≥95% through 80 mesh; heavy metals and microbiology as listed.”
  • “Optical form and destination market confirmed before the order.”

When the other grade is the right choice

The racemic grade is the right purchase when the label says “alpha-lipoic acid”, the market file covers the racemic ingredient, and no optical claim is being made. It is also the simpler blend component where a fine 80 mesh powder is not needed. It is not a substitute for the R grade behind an R label, because the declared ingredient and the weighed ingredient would differ by roughly half.

The R grade is the right purchase when the label names it, when the formula is built on a declared R amount, or when the optical form is part of the product story the brand has chosen. Moving in either direction needs a written change control — a new specification line, a label review, a stability check and a market check — because the two grades carry different CAS numbers.

The product hub carries the catalog specification; the racemic grade is on the alpha-lipoic acid product page; the optical evidence is on the identity page; the release lines are on the COA page; the full comparison is on the level-four page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation