02 Grade comparison

Glucosamine sulfate 2KCl, 2NaCl or HCl: choosing the salt

Technical document 02 · Reviewed 2026-11-20 · Glucosamine Sulfate

On this page
  1. Why the sulfate is sold as a complex
  2. The forms side by side
  3. Solubility, moisture and particle size
  4. Dose arithmetic and the label
  5. What to write into the specification
  6. When another form is the better choice

Glucosamine sulfate is sold as the 2:1 sulfate stabilised with two potassium chloride units (2KCl) or two sodium chloride units (2NaCl); the catalog grade here is the 2KCl complex, CAS 14999-43-0. The hydrochloride is a separate product with its own CAS number, assay basis and label name. The choice changes the glucosamine base per gram, the mineral load and the ingredient name, not only the word printed on the certificate.

In one line

The sulfate form is not one powder: the 2KCl complex, the 2NaCl complex and the hydrochloride carry different masses of glucosamine per gram and different label names.

Why the sulfate is sold as a complex

Glucosamine is an amino sugar, C6H13NO5, with a formula mass of 179.17. The bare 2:1 sulfate is a hygroscopic solid that is difficult to pack and keep as a free-flowing powder, so the commercial answer is to crystallise it with an alkali chloride. Two potassium chloride units give the 2KCl complex; two sodium chloride units give the 2NaCl complex. The counter-ion is part of the solid, not a coating and not an impurity.

The catalog grade is the 2KCl complex: (C6H13NO5)2·H2SO4·2KCl, CAS 14999-43-0, formula mass about 605.5 for two glucosamine units. Potassium chloride is about a quarter of that mass. That is why the glucosamine share per gram is lower than the hydrochloride's, and why a switch between the forms is a mass change as well as a name change.

The forms side by side

Glucosamine salts compared per glucosamine unit
FormFormula massGlucosamine baseSulfateCounter-ionLabel name
Hydrochloride215.6383.1%NoneChloride, 16.4%Glucosamine hydrochloride
Sulfate 2KCl302.859.2%15.9%Potassium 12.9%, chloride 11.7%Glucosamine sulfate 2KCl
Sulfate 2NaCl286.762.5%16.8%Sodium 8.0%, chloride 12.4%Glucosamine sulfate 2NaCl
Sulfate, bare 2:1228.278.5%21.1%NoneGlucosamine sulfate

The formula masses are given per glucosamine unit so that the column compares like with like. The 2KCl row is the catalog grade; the other rows are contexts for a switch, not stock items. A purchase order that says “glucosamine sulfate” without the counter-ion has not fixed the formula mass, and the mass per serving can move by 40%.

Solubility, moisture and particle size

The catalog material is a white to off-white, free-flowing powder: ≥95% through 80 mesh. It dissolves freely in water, and the solution is acidic. The potassium chloride goes into solution with the complex. Solubility is not the reason to choose the sulfate over the hydrochloride, because both forms dissolve; the reason is the label, the customer specification or the mineral load.

Hygroscopicity is the handling issue. The powder picks up moisture when the pouch is open. The loss on drying limit is ≤1.0%, and a powder left in a humid room will move toward that limit and past it. Keep the pack sealed, let a cold pack equilibrate before opening, and do not leave a scoop in the drum. The 2KCl complex is the form supplied as a food-grade powder; the bare sulfate is not the usual commercial solid.

Particle size is a finishing choice. The catalog is 80 mesh, and granulated material is available on request. A coarser granule flows better and makes less dust, but it dissolves more slowly and changes the mouthfeel of a stick pack. The sieve result belongs in the specification, not in the packing note.

Dose arithmetic and the label

A label declares the salt; a formula weighs the salt; the glucosamine base is the bridge between them. One gram of the 2KCl complex carries about 592 mg of glucosamine base, and one gram of the hydrochloride carries about 831 mg. A 1,500 mg label of the 2KCl complex therefore declares about 888 mg of base, while the same label weight of hydrochloride declares about 1,246 mg.

Glucosamine base by form
FormBase per gramBase in a 1,500 mg weigh-inComplex needed for 1,500 mg base
Hydrochloride831 mg1,246 mg1,805 mg
Sulfate 2KCl592 mg888 mg2,535 mg
Sulfate 2NaCl625 mg938 mg2,400 mg
Sulfate, bare 2:1785 mg1,178 mg1,911 mg

The mineral figure follows the same arithmetic. A 1,500 mg weigh-in of the 2KCl complex carries about 194 mg of potassium; the same weight of the 2NaCl complex carries about 120 mg of sodium. In the United States, sodium and potassium are declared in the Supplement Facts panel when they are present at a declarable level. In the EU they belong in the nutrition declaration where one is given. A capsule built on the 2KCl complex also needs about 40% more mass than the hydrochloride for the same base, which changes the fill weight and sometimes the capsule count.

These figures are label arithmetic, not dose recommendations. The finished product's intake and its regulatory position are separate decisions.

What to write into the specification

  • “Glucosamine sulfate 2KCl, CAS 14999-43-0, (C6H13NO5)2·H2SO4·2KCl.”
  • “Assay 98.0–102.0% by HPLC; state the basis on the certificate.”
  • “Sulfate 15.0–17.0% by titration.”
  • “Loss on drying ≤1.0%; particle size ≥95% through 80 mesh.”
  • “Potassium about 12.9% and chloride about 11.7%, where the counter-ion is to be confirmed analytically.”
  • “Source (shellfish or fermentation) and the matching allergen statement.”
  • “Heavy metals and microbiology as listed.”

We supply the 2KCl complex. The 2NaCl complex and the bare sulfate are different specifications with different masses and label names; they should not be substituted at the balance without written change control.

When another form is the better choice

The hydrochloride is the better choice when the label can name it and the formula wants the most glucosamine base per gram with no potassium or sodium. It is also the simpler choice for a small capsule or a low-mineral formulation. The 2KCl complex is the choice when the label, the customer specification or the market file calls for the sulfate form and the potassium load is acceptable.

Do not switch in either direction without new artwork, a new specification and a fresh allergen check. The form is part of the ingredient identity, not a unit conversion applied at the weigh-up. The product hub carries the catalog specification; the level-four comparison works through the label arithmetic; the COA page shows where the sulfate line sits; the glucosamine hydrochloride page gives the other form's specification; the chondroitin sulfate page is the usual companion material.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation