01 COA & batch testing

What a coenzyme Q10 certificate reports, and what it leaves to the method

Technical document 01 · Reviewed 2026-11-20 · Coenzyme Q10

On this page
  1. The certificate as a test report
  2. Anhydrous basis, water and the melting point
  3. Release limit versus batch result
  4. What moves between batches
  5. When to order an outside test
  6. What to compare between suppliers

The certificate for a coenzyme Q10 lot reports appearance, identification by HPLC and UV, assay by HPLC at 275 nm on the anhydrous basis, melting point, loss on drying, the heavy-metal panel, microbiology and particle size. The catalog limits are the release gates; the batch results are what the laboratory measured on that lot. The certificate becomes auditable only when each row carries its method, its basis and its own result.

In one line

A CoQ10 assay is a percentage of ubiquinone on the anhydrous basis; the melting point, the loss on drying and the related-substance profile are what make that percentage auditable.

The certificate as a test report

A certificate answers several questions at once. Appearance describes the powder, identification says the peak is the right quinone, assay says how much is there, and melting point and loss on drying describe the solid. A row that reduces any of this to “conforms” has replaced evidence with a conclusion.

The catalog sets 98.0–101.0% by HPLC on the anhydrous basis, with a melting point of 48–52 °C and loss on drying at ≤1.0%. Those are limits, not results; the lot certificate reports the measured value against each gate.

Identity, assay and release limits · coenzyme Q10
ParameterMethodCatalog limit
AppearanceVisualYellow to orange-yellow powder
IdentificationHPLC retention and UV spectrumConforms to the reference
Assay (anhydrous basis)HPLC with UV detection at 275 nm98.0–101.0%
Melting pointCapillary or equivalent48–52 °C
Loss on dryingGravimetric≤1.0%
Heavy metalsICP-MSPb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg
MicrobiologyPlate count and absence testsAPC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent
Particle sizeSieve analysis≥95% through 80 mesh

Identification and assay are separate questions. The identification row decides whether the material is ubiquinone rather than ubiquinol, a different quinone or a diluted powder; the assay row decides how much is present. A percentage cannot answer the first one.

Anhydrous basis, water and the melting point

Coenzyme Q10 is assayed on the anhydrous basis. The laboratory weighs the powder as received, measures the loss on drying, and calculates on the dry matter. A lot that reads 98.6% as weighed with 0.6% loss on drying calculates to 99.2% anhydrous; the same powder can look different on two certificates, and neither is wrong.

The basis belongs in the assay row, not a footnote, and the loss on drying belongs beside it as a measured figure. A result close to the 1.0% limit leaves less room for moisture pickup, and it lowers the as-is assay even when the anhydrous figure is unchanged.

Loss on drying and water by Karl Fischer are not the same test. A pharmacopoeial monograph for ubidecarenone can set a water limit tighter than the catalog's loss-on-drying limit, because the methods capture different material; a lot that meets the catalog can still miss the monograph. If the destination file cites a pharmacopoeia, put the method and the limit side by side.

The assay method should name the column, mobile phase, wavelength and standard. A typical pharmacopoeial separation uses a C18 column, a methanol and alcohol mobile phase, about 35 °C and UV detection at 275 nm. The catalog method is HPLC; the certificate should show a defined method, not a generic “HPLC” label.

Identification has more than one accepted form. HPLC retention plus the UV spectrum is the catalog requirement; a pharmacopoeial file may also ask for infrared absorption and the blue colour reaction with dimethyl malonate and alkali. Those tests support the same identity from different angles, but the reader should know which one was run.

Release limit versus batch result

A release limit is the boundary the lot must meet; a batch result is the measurement on that lot. The certificate needs both, in separate columns, with the method named. A result column filled with the specification range is not a result; it is a second copy of the gate.

What the result column should contain for a coenzyme Q10 lot
ParameterRelease limitResult column
Assay98.0–101.0% anhydrousA measured percentage, with the basis and the method
Melting point48–52 °CThe measured range or onset
Loss on drying≤1.0%A measured percentage
Related substancesAgreed individual and total limitsThe named peaks, their relative retention and the total
Heavy metalsPer elementA measured figure in mg/kg for each element

For related substances, name what was bounded. Coenzymes Q7, Q8, Q9 and Q11 are homologues with different side-chain lengths; the (2Z)-isomer is a geometric isomer. A total-impurity figure without individual peaks hides which one is present, and the peaks are what separate a fermentation change from a light-exposure event.

What moves between batches

Fermentation and crystallisation move the colour, assay and trace-homologue profile; drying moves the loss on drying; milling and sieving move the particle-size result without changing the chemistry. The melting point can shift within 48–52 °C with crystal form and purity, so a value at the edge deserves a look rather than automatic rejection.

Light and heat can change a lot after release. Exposure can raise the (2Z)-isomer and other related substances while the assay falls only slightly, so a chromatogram that was clean at release and shows a new shoulder after storage is telling a story about the pack.

A trend across lots is more informative than one result near a limit: assay drifting low, loss on drying climbing or a growing Q9 peak. The lot code on the certificate should match the pouch, the drum and the retained sample.

When to order an outside test

Order an independent test for a new source, a first shipment into a regulated market, a disputed form, or a lot stored in uncertain conditions. The useful panel is HPLC assay with the related-substance chromatogram, UV and infrared identity, melting point, loss on drying or water by Karl Fischer, ICP-MS and microbiology.

Add a redox check when the question is ubiquinone versus ubiquinol. A single 275 nm assay calibrated for ubiquinone does not report the reduced form, and a “total CoQ10” result after oxidation measures the sum rather than the form. Name the standard, wavelength and sample preparation.

Ask for the detection limit behind every “not detected” line; a screen that cannot see 0.1% cannot support an absence claim. The report should identify the lot and the pack.

What to compare between suppliers

Put seven lines side by side: form and CAS; assay result and basis; identification tests run; melting point and loss on drying; related substances with named peaks; heavy metals and microbiology; pack size and lot code. Two quotes that agree on assay but differ on form or basis are not describing the same powder.

The second layer is traceability: who manufactured the lot, which fermentation or isolation route was used, and which drying and milling steps were applied. The catalog specification sits on the coenzyme Q10 product page. The tests that separate ubiquinone from ubiquinol are on the identity page; the presentation options are on the grades page; the method notes are collected under methods; the release workflow is described on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation