Whey protein concentrate: MOQ, packaging and ordering
An order for whey protein concentrate is a specification event before it is a quantity event. The smallest quantity is one kilogram, the production unit is a 25 kg fibre drum, and stock material moves in one to seven days once the grade, the pack and the destination are settled. Nearly everything that delays a shipment sits in those last two words.
One kilogram is enough to prove the powder in a trial, and the 25 kg drum is the unit the production order is built from.
Why the minimum is one kilogram
One kilogram is the smallest quantity that arrives with its own lot number and its own certificate. That is the real reason for the floor. A trial is only worth running if every gram in it comes from the same lot, because lactose, fat and particle size all move between lots, and a trial that mixes two of them measures the blend rather than the ingredient.
The quantity is also enough to be useful. A kilogram of WPC 80 at 76.0% protein as-is carries 760 g of protein, which is 38 servings at 20 g each — enough for a bench batch, a repeat after the first result, and a portion held back for a stability pull. A smaller sample would cover the first run and leave nothing for the second.
Production orders are easier to size in protein than in powder. The 25 kg drum holds 19 kg of protein at the same 76.0% figure, and a 300 kg order holds 228 kg. If a batch has to deliver a fixed protein weight, the powder weight comes from the as-is percentage, not from the 80 on the specification.
Packaging
| Format | Fill | Where it fits | What to watch |
|---|---|---|---|
| Foil pouch | 1 kg | Bench work, pilot runs, samples | Reseal fully; keep the headspace small |
| Fibre drum with liner | 25 kg | Production | The liner is the moisture barrier, not the board |
| Agglomerated or instantized | 1 kg or 25 kg | Wetting and dust are the constraint | Lower bulk density; confirm the fill weight |
Every pack carries the same six pieces of information: product name, grade, lot number, net weight, storage condition and the milk allergen statement. The pouch is a laminate with a resealable closure; the drum is board with an inner liner, and a liner that has been slit and folded back exposes the powder to the board and to the air.
The format is not a logistics detail. A 10 kg bag opened on a line and left through a shift behaves differently from a sealed drum, and the stability position changes with it. A specification that names the pack has said something that one which stays silent has left for the buyer to discover.
Lead time
Stock material dispatches in one to seven days. The count starts when the grade, the specification revision, the pack and the shipping address are all agreed; it does not start when the first email lands. A purchase order that arrives before the grade is fixed sits in the inbox rather than in the schedule.
Four things take an order out of the stock route: a pack the site does not hold, an agglomerated or instantized grade that has to be scheduled, a document set that has to be issued, and a destination the standard carrier does not serve. Each adds time, and the quotation should say which one applies instead of leaving the buyer to read the delay into the one-to-seven days.
What a quotation needs
A quotation is complete when it answers six questions. Anything less is an indication of interest rather than an offer.
- Which grade and which revision of the specification, including the protein factor and the drying process.
- How many kilograms, in which pack, for a trial or for a production release.
- Where it is going, on which Incoterm, to which address — because these decide the route and the papers.
- Which documents are needed: COA, specification, safety data sheet, allergen statement, and any non-GMO, halal or kosher certificate.
- Whose label goes on the pack, and what lot marking it has to carry.
- When it has to arrive, and whether the carrier or the packaging material is restricted.
The first two answers are the easy ones. The other four are where a confirmed order turns back into a question.
Samples
A sample is a document with powder attached. The powder should be drawn from the lot on the purchase order and carry that lot's number, its COA and the milk statement. Powder in a plain bag with no lot number is a demonstration; it cannot support a stability study, a label decision or a complaint.
Order enough for two runs. A hundred grams answers whether the powder wets and whether it foams, but it will not survive a formulation change, and it leaves nothing for the retained portion. That is what the 1 kg pouch is for.
Where the terms end
Commercial terms belong in the offer and the agreement between the parties, not on a specification page. What this page can state is the supplier's side: the specification a lot is released against, the pack, the documents and the dispatch window for stock material. What the buyer owns is where it goes, what the pack says, how it is stored on arrival and what the finished product does with it.
Three boundaries are worth fixing before the first order. The storage condition and the re-test period, because material kept outside the stated condition is outside the specification. The complaint window and the retained sample, because a claim that cannot be checked against a retained sample cannot be settled. And the definition of the pack, because a specification that names the pouch does not automatically cover a drum.
The parameters an order is placed against are on the COA page. The grade and pack it should name are on the grade comparison, and the limits behind both are on the product page. The papers that travel with the drum are listed on the compliance page, and the batch file itself is described on the quality page. The definition of the minimum is in the MOQ glossary entry.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation