Soy protein peptide grades: peptide content and form
Soy protein peptides are hydrolysed soy protein, specified at ≥90% protein and ≥80% peptide, and the grades differ mainly in peptide content and physical form. The intact soy protein isolate is a different ingredient with a different label, even when its protein figure is also 90%. The choice is set by the matrix, the taste, the protein target and the soy declaration, not by the protein percentage alone.
A soy peptide grade is fixed by how far the protein is hydrolysed and how the powder is finished; the protein percentage alone does not tell a hydrolysate from an isolate.
Why the family has more than one member
Hydrolysis cuts peptide bonds and turns intact soy protein into a mixture of shorter peptides and free amino acids. The degree of hydrolysis is the share of bonds broken, and the peptide content by HPLC is the commercial measure of how much of the powder sits in the peptide fraction. Two lots can both pass ≥90% protein and still differ in peptide content, taste and solubility because the enzyme, the time and the drying were different.
The family also includes the intact material. Soy protein isolate is ≥90% protein on a dry basis, made by alkaline extraction and isoelectric precipitation; it is not hydrolysed, so it has no peptide specification and behaves as a protein rather than as a peptide. The two are separate label ingredients and separate specifications, and a purchase order that names only “soy protein” has specified neither.
The two materials at a glance
| Property | Soy protein peptides | Soy protein isolate |
|---|---|---|
| Protein | ≥90.0% by Kjeldahl; factor stated | ≥90.0% on a dry basis, N × 6.25 |
| Peptide content | ≥80.0% by HPLC | Intact protein; no peptide specification |
| Water behaviour | Soluble; clear to slightly turbid | Dispersible; opaque, can settle |
| Function in a formula | Low viscosity; little gel or emulsion | Viscosity, gel, emulsion and water binding |
| Taste | Savoury and beany; bitterness rises with hydrolysis | Beany and cereal; blander at the same solids |
| Soy allergen | Declared | Declared |
| Label name | Soy protein peptides | Soy protein isolate |
| Usual fit | Sticks, drinks and clear systems | Bars, powders and textured systems |
The table maps the family; it is not a ranking. The isolate is the material for a formula that needs the protein's own functional behaviour. The peptide is the material for a formula that needs solubility and a low viscosity at high solids. Both rows carry the same source and the same allergen.
What changes in the powder
The standard peptide powder is 80 mesh: ≥95% through 80 mesh. It is off-white to light yellow, free-flowing when dry and hygroscopic once the pouch is open. Granulation is available on request; it changes the bulk density, the dust and the wetting rate, not the protein or peptide figure.
The isolate is also specified at 80 mesh, but it disperses rather than dissolves. An isolate dispersion is opaque and can settle; a peptide solution is clear to slightly turbid at the same solids. Colour and odour move with the raw material and the dry: both are beany, and the peptide can carry a savoury note that strengthens as the degree of hydrolysis rises.
Mesh is a finishing specification. A finer cut disperses faster and makes more dust; a granulated powder flows better and fills a scoop differently. Neither is a grade in the chemical sense, and neither changes the allergen statement.
What changes at the target dose
The label arithmetic runs on the as-is figure. At 90.0% protein on a dry basis and 7.0% moisture, the powder is 83.7% protein as-is, so 5 g carries 4.19 g protein. If the peptide figure is also on a dry basis, 80.0% becomes 74.4% as-is and 5 g carries 3.72 g peptide. The peptide mass sits inside the protein mass, so the two figures do not add up to the powder weight.
Peptide is a fraction of the protein, not an addition to it. At the catalog figures, peptide is at least 88.9% of protein on the same basis; the rest is free amino acids and nitrogen that the peptide method does not count. A label that adds “protein” and “peptide” as two masses double-counts the same nitrogen.
A serving statement should name the ingredient and the basis. “5 g soy protein peptides” and “4 g soy peptides” are different statements; the first is the ingredient weight, the second a peptide figure that needs an analytical basis. The brand's regulatory reviewer confirms the wording for the destination, and this page makes no disease-related claim.
What to write into the specification
- “Hydrolysed soy protein, sold as soy protein peptides; the soy source is named.”
- “Protein: ≥90.0% by Kjeldahl, with the factor and the moisture basis on the certificate.”
- “Peptide: ≥80.0% by HPLC, with the column, mobile phase and cut-off named.”
- “Moisture ≤7.0%, ash ≤5.0%, and ≥95% passing 80 mesh.”
- “Where taste or clarity matters, report the degree of hydrolysis or the molecular-weight distribution.”
- “Soy allergen statement; non-GMO or identity-preserved status only if the label claims it.”
A specification that says only “soy peptide powder” leaves the supplier free to choose the hydrolysis and the carrier. The name on the specification, the certificate and the ingredient list has to be the same name.
When the other material is the wrong choice
The peptide is the wrong choice when the formula needs the intact protein's gel, emulsion or water-binding behaviour, as in some bars and textured systems. The isolate is the wrong choice when the serving needs a clear solution, a low viscosity at high solids or a peptide figure on the label. A switch in either direction changes the specification, the label name and the allergen statement, even though both materials come from soy.
If the allergen is the deciding factor, neither soy material solves it. Soy is the source of both, and hydrolysis does not remove the declaration. A formula that must avoid soy needs a different protein, such as collagen peptides, with its own specification and its own allergen position; that is a reformulation, not a grade change.
The catalog grade sits on the product hub. The level-four comparison follows the solubility, allergen and label questions; the isolate page gives the intact specification; the COA page shows how the two figures are reported; the methods section explains the assays.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation