Porcine collagen peptides: the grades and what changes between them
Porcine collagen peptides are supplied as a standard 80 mesh powder, with a granulated powder on request. The grade question is not a different protein: every grade here carries the same porcine skin type I source and the same ≥90% protein and ≥80% peptide window. What changes is the peptide curve and the particle size, and those decide how the powder flows, wets and dissolves in the dosage form.
There is one porcine source and one protein window here; the grade decision is the peptide curve and the particle size, because those are what change in the drum.
Why a collagen peptide still has grades
“Collagen peptides” describes a family of hydrolysates, not one grade. Across the category, the source, the tissue, the peptide curve and the particle size all move, and each one changes the label or the process. On this product the source and the tissue are fixed, so the grade decision narrows to two variables: how far the collagen is hydrolysed, and how the powder is finished.
Those two variables are not cosmetic. A finer peptide curve wets faster and dissolves more cleanly, and it can taste less broth-like because fewer large peptides remain. A coarser curve keeps more high-molecular-weight material, which can thicken a solution and change the mouthfeel. Granulation improves flow and cuts dust, but it makes the powder slower to wet. The grade is a formulation decision before it is a purchasing one.
The standard powder and the granulated form
The catalogue form is the 80 mesh powder; the granulated variant is made on request. Both are the same hydrolysate, and both are packed in the same 1 kg pouch and 25 kg drum.
| Property | Standard powder | Granulated on request |
|---|---|---|
| Description | Spray-dried hydrolysate, 80 mesh | Granulated hydrolysate |
| Particle size | ≥95% through 80 mesh | Coarser granule, stated on the specification |
| Flow and dust | Free-flowing, dusty when poured | Low dust, better flow |
| Wetting and dissolution | Wets quickly, dissolves with moderate mixing | Slower to wet, needs more mixing |
| Typical use | Capsules, tablets, sticks and drink mixes | Blending and tableting where dust is a problem |
| Documentation | Catalogue specification | Separate specification line; lead time confirmed |
Granulation is a specification change, not a packing choice. It shifts the particle-size line and can also change the bulk density, the wetting time and the lead time. If the dosage form needs it, say so before the quotation, and ask for the particle-size result on the granulated lot rather than assuming it matches the powder.
What 80 mesh means in handling
The 80 mesh figure means that at least 95% of the powder passes a sieve with 80 openings per linear inch, roughly 177 µm. It is a fine powder: it dusts when poured, it wets quickly, and it can bridge in a hopper. Bulk density and flow are not on the catalogue sheet, so they are worth measuring on the sample if the process is sensitive to them.
The powder is off-white to pale yellow, free-flowing, and mildly odorous. It is hygroscopic, so an open bowl on the bench is a moisture pickup as well as a dust source. In water it dissolves to a clear to slightly opalescent solution; a hazy solution can come from a high-molecular-weight fraction, from undissolved powder or from the dose, and the grade alone does not explain it.
The physical tests do not change the chemistry. A granulated lot should still meet the same protein, peptide and contaminant lines; if granulation introduces a carrier, that carrier is a new specification item and a new label question.
Matching the grade to the dosage form
For capsules and tablets, the 80 mesh powder blends well with excipients and sits in a fill weight measured in grams. The granulated form is easier to handle where dust is a problem or where the blend has to flow on a high-speed press, but it wets more slowly when the tablet disintegrates. Neither grade changes the declared protein per serving; the grade changes the process, not the number on the label.
For sticks and drink mixes, the fine powder is the practical starting point because it wets and disperses quickly. A granulated powder can be used, but the mixing time and the clarity of the drink have to be checked at the target dose. For a ready-to-drink beverage, the peptide curve matters more than the mesh: a high-molecular-weight fraction can haze or thicken the drink over its shelf life.
The grade does not set the dose. The finished product's serving size and the label are separate decisions, and the brand's reviewer checks them. This page describes the powder, not a serving recommendation.
Writing the grade into the specification
Write the grade with the source, the curve and the mesh, not with the product name alone:
- “Porcine collagen peptides, type I, porcine skin; CAS 9007-34-5.”
- “Protein ≥90.0% by Kjeldahl with N × 5.55; basis stated on the certificate.”
- “Peptide content ≥80.0% and ≥80% below 3,000 Da by SEC-HPLC; fractions reported.”
- “Loss on drying ≤7.0%; ash ≤5.0%.”
- “Particle size ≥95% through 80 mesh, or the granulated variant's stated size.”
- “Heavy metals and microbiology as listed; species and tissue declared.”
- “Packs: 1 kg foil pouch, 25 kg fiber drum.”
A specification that names “collagen peptides” and a mesh has not named the species. On a porcine lot the species is the first line, because it decides the label and the religious-use position as well as the analysis.
When the grade cannot solve the problem
No grade fixes a source problem. If the label, the market or the consumer requires a non-porcine material, the granulated form is still porcine and no certificate changes that. The alternative is a different product: bovine collagen peptides or fish collagen peptides, with their own files. The porcine versus bovine comparison sets out those positions.
The standard window is also not a custom curve. If the application needs a tighter peptide target or a different mesh, the specification can be agreed at that target, but it becomes a separate grade with its own sample and lead time. Ordering the standard powder and milling it later moves the particle size without a new release file, which is the wrong way round.
The catalogue entry is on the porcine collagen peptides product page; the release lines are on the COA page; the source and label questions are on the compliance page; the packs and lead time are on the MOQ page.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation