Pea protein isolate: MOQ, packaging and ordering
A pea protein order starts as a specification decision and only then becomes a quantity. One kilogram is the smallest pack that arrives with its own lot number and certificate; 25 kg is the fiber drum the production order is built from. Stock material moves in one to seven days once the grade, the pack and the destination are settled.
One kilogram is a lot-tied trial pack; the 25 kg drum is the production unit, and the order is fixed by the specification before the quantity.
Why the floor is 1 kg
A kilogram is the smallest pack that comes with a lot number and a certificate of its own, and that is why the floor sits there. A trial is only worth running if every gram comes from the same lot, because protein, ash, colour and dispersibility move between lots, and a trial that mixes two lots measures the blend rather than the ingredient.
The quantity is also useful. At the 8.0% moisture limit, a kilogram of isolate at 73.6% as-is carries 736 g of protein, or 36 servings at 20 g. That is enough for a bench batch, a repeat after the first result, and a portion held back for a stability pull. A smaller sample would do for one run and leave nothing for a repeat.
Production is sized in drums. A 25 kg drum carries 18.4 kg of protein at that same as-is figure; a 300 kg order carries 220.8 kg. When the batch has a fixed protein weight, the powder weight comes from the as-is percentage, not from the 80 in the product name.
Packs and fills
| Format | Fill | Where it fits | What to watch |
|---|---|---|---|
| Foil pouch | 1 kg | Bench, pilot, sample | Reseal after each opening; keep the headspace small |
| Fiber drum with liner | 25 kg | Production | Board is not the barrier; the liner is |
| Agglomerated or instantized | 1 kg or 25 kg | Wetting and dust drive the choice | Lower density; check the fill weight |
Six things go on every pack: product name, grade, lot number, net weight, storage condition and the pea allergen statement. The pouch is a resealable laminate. The drum is board around an inner liner, and a liner slit and folded back puts the powder against board and air.
The pack is not a logistics afterthought. A pouch opened at the start of a shift and left open behaves nothing like a sealed drum, and the stability position moves with it. Naming the pack in the specification settles a question the buyer would otherwise discover on the line.
Dispatch window
Stock ships in one to seven days, counted from the moment the grade, the specification revision, the pack and the shipping address are agreed, not from the first email. An order that lands before the grade is fixed waits in the inbox, not in the schedule.
An order leaves the stock route for one of four reasons: the site does not hold the pack, the agglomerated or instantized grade has to be scheduled, a document set has to be issued, or the standard carrier does not serve the destination. Each adds time, and the quotation should name the one that applies.
Six lines a quotation has to answer
Six answers make a quotation complete; without them it is an indication of interest, not an offer.
- The grade and the revision: pea protein isolate, N × 6.25, dry basis, 80 mesh, spray-dried.
- How much, in what pack, and whether it is a trial or a production run.
- The destination, the Incoterm and the delivery address, since those fix the route and the paperwork.
- The documents: COA, specification, SDS, allergen statement, and any non-GMO, halal or kosher certificate.
- The label owner and the lot marking required.
- The required date, and any restriction on carrier or packaging.
The first two are simple. The last four are where a confirmed order becomes a question again.
What a sample has to carry
A sample is paperwork with powder behind it. Draw the powder from the lot named on the order, and send it with that lot's number, COA and pea statement. Powder in an unmarked bag is a demonstration; it cannot back a stability study, a label decision or a complaint.
Buy enough for two runs. A hundred grams shows how the powder wets and how earthy it tastes; it will not cover a formulation change, and it leaves nothing for retention. That is the job of the 1 kg pouch.
Where the supplier's side ends
Commercial terms live in the offer and the contract, not on a specification page. The supplier's side is the specification a lot is released against, the pack, the documents and the dispatch window for stock. The buyer's side is the destination, the label, the storage on arrival and the finished product.
Three points are worth fixing before the first order: the storage condition and the re-test period, because material kept outside the stated condition is outside the specification; the complaint window and the retained sample, because a claim that cannot be checked cannot be settled; and the definition of the pack, because a specification that names the pouch does not automatically cover a drum.
The parameters an order is placed against are on the COA page; the grade and pack it should name are on the grade comparison; the catalogue limits behind both are on the product page. The documents that travel with the drum are on the compliance page, the batch file is on the quality page, and the minimum itself is defined in the MOQ glossary entry.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation