02 Grade comparison

Milk protein concentrate grades: 70, 80, 85 and what changes

Technical document 02 · Reviewed 2026-11-20 · Milk Protein Concentrate

On this page
  1. Why one name covers several materials
  2. The grades side by side
  3. Standard, instantized, and the heat class
  4. The protein arithmetic per serving
  5. What to write into the specification
  6. When another ingredient is the right one

Milk protein concentrate is sold by grade — 70, 80 and 85 are the usual protein floors on a dry basis, and milk protein isolate sits above them — and the grade fixes the lactose, ash and fat that come with the protein. It also fixes the physical form: standard or instantized, low-heat or high-heat. The catalogue line on this site is the 80 grade; this page covers what changes across the family, and when another ingredient is the right one.

In one line

The grade is the protein floor plus everything the separation leaves behind: raising the protein lowers the lactose and the ash, and the physical form decides how the powder behaves.

Why one name covers several materials

Skim milk is passed through an ultrafiltration membrane. The membrane retains the casein and the whey proteins and lets water, lactose and soluble minerals through; diafiltration — washing the retentate with water — removes more of them. The retentate is then heat-treated and spray-dried. The protein floor is set by how far the concentration is taken, and the grade number is that floor.

Because both protein classes are retained, the casein-to-whey ratio of a milk protein concentrate stays close to the ratio in milk, about 80:20. That is the feature that separates it from whey protein concentrate, where the casein has been removed, and from caseinate, where the whey has. The difference is compositional, not a matter of degree, and it is the subject of the comparison against whey protein concentrate.

The grade family exists because the same process run to different endpoints gives powders with different jobs. A 70 grade keeps more lactose and ash and suits a dairy blend; an 85 grade or a milk protein isolate carries more protein per gram and suits a high-protein formula where the lactose and the mineral load have to stay low.

The grades side by side

Milk protein concentrate 80 and what changes across the family
PointMPC 80 (catalogue)What changes at 70 or 85
Protein, dry basis≥80.0%, N × 6.38Lower floor at 70, higher floor at 85
Fat≤2.0%Agreed per grade; the milk source sets the starting level
Lactose≤5.0%More at 70, less at 85, because the wash removes it
Ash≤7.0%More at 70, less at 85; the wash removes soluble minerals with the lactose
Casein to wheyAbout 80:20 of the proteinUnchanged: every grade keeps both classes
SeparationUltrafiltration and diafiltrationMore diafiltration at the higher grades
Usual fitBars, drinks, dairy blends70 for a dairy base; 85 or isolate where protein per gram rules
Label nameMilk protein concentrateThe grade number belongs in the specification, not on the label

Milk protein isolate is the top of the family, at 90% protein or above. It is not a different kind of ingredient: it is the same separation taken further, so the casein and whey are still both present and the lactose and ash are lower again. A buyer who needs the protein without the minerals is choosing the isolate; a buyer who needs the dairy body is usually choosing a lower grade.

Standard, instantized, and the heat class

The catalogue form is a spray-dried powder with ≥95% through 80 mesh. That is a finishing specification, and it decides dust, flow and how quickly the powder wets. An instantized grade is agglomerated so that the particles sink and disperse without lumps; the agglomeration changes the particle-size distribution and the bulk density, and it usually adds lecithin as a processing aid. Lecithin is an ingredient on the finished label, and when it is soy-derived it brings a second allergen question with it.

Heat treatment is the other hidden variable. A low-heat process leaves more whey protein in its native state, which matters for gelation and foaming; a high-heat process denatures more of it, changing the flavour, the heat stability and the behaviour in a retort or a bake. The classes are defined through the whey protein nitrogen index, and the numeric boundaries belong to the method agreed. Name the class in the specification rather than assuming it from the grade number.

Bulk density, dispersibility and colour are not on the catalogue sheet as release limits, but they are the lines a production trial notices first. Ask for them when the powder has to run on an existing filling line.

The protein arithmetic per serving

A label that declares 20 g of protein needs the as-is protein content of the grade, not the dry-basis figure. At 5.0% moisture, 80.0% dry basis is 76.0% as-is, so 20 ÷ 0.76 = 26.3 g of powder. At 6.0% moisture the same grade gives 75.2% as-is and the weight becomes 26.6 g. The difference looks small on one serving and is not small across a production batch.

The rest of the powder is not protein. A 26.3 g scoop of the 80 grade can carry up to about 1.3 g of lactose, 1.8 g of ash, 0.5 g of fat and 1.6 g of moisture at their limits. The lactose is carbohydrate on the nutrition panel and the ash is mineral matter a calcium declaration has to account for, so formulating on protein alone leaves those lines to be found at label review.

If the finished product carries a protein claim, the claim is calculated on the whole serving and its energy, not on the ingredient. That calculation is set out on the compliance page, because the threshold belongs to the market and the finished product rather than to the drum.

What to write into the specification

  • “Milk protein concentrate, grade 80, protein ≥80.0% on a dry basis by Kjeldahl, N × 6.38.”
  • “Moisture ≤6.0%; fat ≤2.0%; lactose ≤5.0%; ash ≤7.0%, each reported as-is.”
  • “Particle size ≥95% through 80 mesh; instantized or standard, stated explicitly.”
  • “Heat class named, with the whey protein nitrogen method agreed.”
  • “Lecithin declared if the grade is instantized, with the source named.”
  • “Milk declared as a major allergen on the specification and on the label.”

A quotation that answers “MPC 80” without the physical form and the heat class has answered one of three questions. The COA page shows where each of these lines appears on the certificate.

When another ingredient is the right one

Milk protein concentrate is the wrong choice for a clear acidic drink. The casein coagulates near pH 4.6, so a beverage acidified below that point will sediment or turn gritty however well the powder was dispersed. Whey protein concentrate stays soluble through that range, and it is the ingredient built for it; the whey protein concentrate page carries that specification.

It is also the wrong choice when the label has to say whey, when a lactose-free claim has to be supported, or when the formula cannot carry the extra calcium and phosphate that come with the casein. Each is a different ingredient requirement, not a defect in the grade. The stability page covers storage behaviour, and the product page carries the catalogue specification.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation