The regulatory file for milk protein concentrate
Milk protein concentrate is a dairy ingredient, so its regulatory file is built around three questions: whether the ingredient is permitted in the destination, which limits apply to its composition and contaminants, and how it must be declared on the finished label. Milk is a major allergen in both the EU and the US, and that declaration is mandatory wherever the ingredient is used. The buyer’s regulatory team confirms the route; this page lists the documents and checks that belong in the file.
The specification describes the powder; the regulatory file shows the route, the limits and the label for the destination, and milk is an allergen that has to be declared in the markets covered here.
What the file contains
The file holds four things at once: the specification revision for the grade, the certificate that releases the lot, the limits and label rules for the finished product, and the record of how source, process and pack changes are handled. The COA reports the lot; the TDS states the specification; the SDS covers handling. None of them settles the destination route, which is recorded separately.
Beyond the certificate, the pack should carry the allergen statement, the GMO statement, the origin of the milk, the heat-treatment class and — for an instantized grade — the lecithin declaration. If one of those is missing for the lot, name the gap before the order moves. Keep a versioned document list at the front of the folder.
European Union
In the EU, milk and products thereof, including lactose, are on the allergen list in Annex II of Regulation (EU) No 1169/2011. The declaration has to be emphasised in the ingredient list, and the ingredient name has to reflect what was used: “milk protein concentrate” is the name, not “milk protein” or “dairy protein”. The same regulation fixes the nutrition declaration, where the protein, carbohydrate — including lactose — and fat have to be accounted for.
Protein claims are set by Regulation (EC) No 1924/2006. A “source of protein” claim requires protein to contribute at least 12% of the energy value of the food; a “high protein” claim requires at least 20%. The calculation is made on the finished product, using the as-is protein of the ingredient, not the dry-basis figure on the certificate. As of this review those thresholds are the reference; check the current consolidated text.
Contaminants sit in Regulation (EU) 2023/915, which replaced Regulation (EC) No 1881/2006 in May 2023; the limits are set per food category and per element. Northern Ireland follows the EU framework, while Great Britain has its own arrangement and labelling rules, so the delivery address decides which file applies.
United States
In the US, milk is one of the major food allergens, and the finished product must declare it — in the ingredient list with the term “milk”, or in a “Contains: milk” statement, under the Food Allergen Labeling and Consumer Protection Act. The declaration is required even when the lactose has been reduced, because the protein is the allergen and it is still present.
Protein content is declared on the Nutrition Facts or Supplement Facts panel in grams per serving, calculated from the as-is protein of the ingredient. A “good source” claim needs 10% of the Daily Value per serving and a “high” claim 20%, against a protein Daily Value of 50 g. Structure/function language needs substantiation and the DSHEA disclaimer, and no disease claim is open in either market.
Contaminants and limits
The contaminant panel is a finished-product calculation, not only a drum result. The table below is the starting point for a dairy protein file; the destination text and the daily dose decide the final limit.
| Parameter | Reference | What the file should show |
|---|---|---|
| Lead (Pb) | 3.0 mg/kg in the finished supplement | Lot result, method and the conversion to the daily dose |
| Cadmium (Cd) | 1.0 mg/kg in the finished supplement | Lot result and any category exception |
| Mercury (Hg) | 0.10 mg/kg in the finished supplement | Lot result and method |
| Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate |
| Melamine | 2.5 mg/kg in food, EU general level | A lot result and the limit cited for the destination |
| Aflatoxin M1 | Destination limit for dairy | A lot result or a documented exemption |
Melamine and aflatoxin M1 are the two lines a dairy-specific review adds to the usual metal panel: melamine because the protein figure is a nitrogen measurement, aflatoxin M1 because it is a milk-borne contaminant that a plant-protein specification never mentions. Both belong in the file with the method and the limit.
Label and claims
On the label the ingredient is named “milk protein concentrate”, with the grade in the specification rather than in the ingredient list. The milk allergen statement is mandatory in both markets covered here, and a “dairy-free” or “milk-free” claim cannot be supported for a product that contains this ingredient, whatever the lactose figure.
Lactose is a separate question from the allergen. A lactose-free claim has its own threshold in the destination market, and it is measured on the finished product, not inferred from the ingredient specification. The comparison against whey protein concentrate sets out where the lactose and the label name diverge.
Protein claims carry their own arithmetic, and the arithmetic has to include every ingredient that contributes protein. A claim written for the finished product is reviewed against the finished product; a certificate supports the material, not the claim. This site publishes the specification and makes no health claim.
Documents for the file
The buyer’s file needs the COA with protein, moisture, fat, lactose and ash, the metal panel and the micro count; the specification revision; the TDS and the SDS; the allergen statement naming milk; the GMO statement; the country of origin of the milk; the heat-treatment class; and the lecithin declaration for an instantized grade. Add the melamine and aflatoxin M1 results where the destination expects them.
The specification must name the grade, the nitrogen factor and the dry basis. An 80.0% dry-basis figure and an 80.0% as-is figure are not the same powder, and a file that mixes them will fail a label review. The product page carries the catalogue specification; the EU and US notes collect the framework references.
Checklist before the first order
- Specification version, grade and nitrogen factor are named.
- COA, TDS, SDS, allergen, GMO, origin, heat class and lecithin statements are on file.
- The milk allergen declaration is written into the finished label.
- The contaminant results, including melamine, are converted to the finished-product dose.
- The protein claim has been calculated on the finished product and its energy.
- Source, process and pack are under change control.
- The quotation, the specification and the certificate refer to the same version.
The identity page covers the analytical evidence, and the quality page describes the release file behind the certificate.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation