80% or 90%, standard or instantized: choosing a micellar casein grade
Micellar casein reaches the market at more than one protein level and in more than one physical form. The grade on this page is specified at 80% protein on a dry basis; the casein page carries a 90% grade, and the caseinate pages carry the salts. Protein per gram, ash and mineral load, dispersion and the label name all move with the choice. The standard powder passes 80 mesh, and an instantized option is available when wetting speed matters.
The grade decision is protein level and physical form before it is brand: 80% or 90%, standard or instantized, micellar or caseinate, and each choice moves the label and the mixer.
Why the grades exist
Casein is a family, not a single specification. Micellar grades come from skim milk that is passed across a membrane; the micelle and its calcium phosphate stay in the retentate, while whey protein, lactose and soluble salts leave with the permeate. Caseinates start from acid-precipitated curd that is neutralised with sodium or calcium hydroxide. The protein level within the micellar family depends on how much diafiltration the retentate receives: more water washes out more lactose and soluble mineral.
Headline protein is therefore not enough to identify a grade. An 80% micellar powder, a 90% micellar powder and a 90% sodium caseinate can all be called casein by a careless purchase order, and they behave differently in water and carry different labels.
The grades side by side
| Point | Micellar casein 80% | Casein grade 90% | Sodium caseinate |
|---|---|---|---|
| Protein, dry basis | ≥80.0% | ≥90.0% | ≥90.0% |
| Ash | ≤7.0% | ≤2.0% | ≤4.0% |
| Mineral marker | Milk calcium phosphate retained | Ash ≤2.0%; lower mineral load | Sodium 1.0–1.5% |
| Fat | ≤2.0% | ≤1.5% | ≤1.5% |
| Moisture | ≤6.0% | ≤10.0% | ≤6.0% |
| In water | Disperses; opaque; thickens | Disperses; opaque | Freely soluble; slightly turbid |
| Heat step | Thickens; trial the process | Thickens; trial the process | Less thickening on heating; still trial |
| Label name | Micellar casein; milk declared | Casein; milk declared | Sodium caseinate; milk declared |
The ash figure is a mineral load, not a family label. The 80% grade keeps more of the milk’s calcium phosphate and is allowed up to 7.0% ash; a caseinate carries the hydroxide cation; the 90% grade is held to a tighter ceiling. Read ash together with protein and with the sodium or calcium result before treating it as a form check.
Particle size, density and wetting
The catalog powder is a spray-dried 80 mesh cut: at least 95% passes a sieve of about 180 µm. Sieving is the last step in the plant and the first thing a filling line notices. It sets flow, dust and the mass that fills a scoop or a sachet, but it does not predict how the powder behaves once water is added.
An instantized grade is built from the same fines, agglomerated into porous clusters. It sinks and wets faster and produces less dust. Bulk density falls, so a volumetric fill will overfill unless the target weight is reset. Colour is not a grade marker; both forms are off-white to cream.
Load, viscosity and the dosage form
In a drink, viscosity usually arrives before any other limit. As the micelle hydrates, the dispersion thickens; the effect increases with protein concentration, mixing time and shear. Ten grams of protein in a stick pack and 25 g in a ready-to-drink are different mixing problems even with identical powder, and a bench blender is not a production tank.
Bars are governed by water activity and texture through shelf life, not by dispersion. Capsules and tablets need flow and density at 80 mesh, and the dose is capped by fill weight. Whatever the format, trial the grade in the finished matrix at the intended load before the specification is signed. The stability page covers what happens to the powder and the matrix over time.
What to write into the specification
- Form and process: micellar casein separated from skim milk by microfiltration, not a caseinate.
- Protein ≥80.0% on a dry basis, Kjeldahl with N × 6.38; factor and basis printed.
- Moisture ≤6.0%, fat ≤2.0%, lactose ≤1.0%, ash ≤7.0%.
- Physical: ≥95% through 80 mesh; instantized on request; bulk density stated.
- Dispersion test: grams per 100 mL, water temperature, shear, time and sediment limit.
- Allergen: milk declared on the specification and on the COA.
- Contaminants, microbiology, pack, lot code and manufacturing site as on the COA page.
When another grade is the better choice
The 90% grade earns its place when protein per gram is the constraint and the formula can live with a lower ash ceiling and a wider moisture window. A caseinate is the right starting point for a near-clear drink, a fast-dissolving mix or a process with a heat step. Acid casein fits neither role: at its isoelectric point it does not disperse, and it exists as an intermediate on the way to caseinate.
A single grade across a product line usually costs less to manage than several. Each additional form brings its own specification, allergen statement, dispersion trial and label line. The compliance page follows the label consequences; the glossary entry explains the sieve convention. The product page holds the catalog range, and the casein page holds the 90% grade.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation