02 Grade comparison

Fish protein peptide grades: peptide, ash and mesh

Technical document 02 · Reviewed 2026-11-19 · Fish Protein Peptides

On this page
  1. Why a fish peptide grade is a specification
  2. The catalog grade and the variants that need a new specification
  3. Flow, dust, colour and solubility
  4. What the grade means in a capsule, tablet or blend
  5. What to write into the specification
  6. When another grade is the wrong buy

Fish protein peptides are supplied here as one catalog grade: an off-white to light tan powder at ≥80.0% protein by Kjeldahl and ≥70.0% peptide by HPLC, ash ≤10.0%, milled to 80 mesh. What remains to settle is the peptide fraction, the ash, the mesh and the granulation. Those four change flow, taste, solubility and the label more than the trade name on the drum.

In one line

What separates one fish peptide grade from another is the peptide fraction, the ash and the mesh, not the trade name on the drum.

Why a fish peptide grade is a specification

The name covers a family of hydrolysates rather than one powder. Two suppliers can apply it to different tissues, different degrees of hydrolysis and different meshes, and the protein figure can agree while the peptide curve, the mineral load and the flow differ.

The catalog fixes five grade lines: protein ≥80.0%, peptide ≥70.0%, ash ≤10.0%, moisture ≤7.0% and ≥95% through 80 mesh. Change one and you have a new specification, not a packing variant. Fillet trimmings, frame material and mixed by-product streams carry different mineral loads and species mixes.

The source also separates this product from fish collagen peptides: collagen is a specific protein from skin or scale, described by hydroxyproline and molecular weight, and neither mesh nor peptide figure changes that.

The catalog grade and the variants that need a new specification

Fish protein peptide forms and what changes
FormWhat changesWhy a buyer asks
80 mesh powderThe standard grade; nothing changesCapsules, tablets and powder blends
Granulated, on requestCoarser particles, less dust, easier flowBlending and capsule feeding
Different meshWetting, mouthfeel, sieve resultA tablet or a suspension needs another particle size
Higher peptide fractionA new hydrolysis and filtration targetA formula or label calls for more short-chain material
Lower ashA different raw material, washing or neutralisation regimeA high-dose drink or a formula with a mineral limit
Dilution or carrierLess peptide per gram; the ingredient list changesA lower potency is easier to weigh
Fish collagen peptidesA different protein and a different label ingredientA collagen claim, not a fish peptide claim

Rows three and four are easy to mix up. Mesh is a milling decision and leaves the chemistry alone. A higher peptide figure comes from the hydrolysis, not the mill. A dilution brings a carrier and rewrites the ingredient list. When a supplier quotes “fish peptide 80%” and “fish peptide 90%”, ask which figure is protein, which is peptide and which is a dilution.

Granulation alters particle size and flow while the protein and peptide figures stay put, but the mesh result and the wetting behaviour move. Even with identical chemistry, the granulated form is a separate specification line. The comparison with fish collagen is taken further on the fish peptides versus fish collagen page.

Flow, dust, colour and solubility

At 80 mesh the particles pass roughly 177 µm. The powder runs in a capsule machine yet dusts on pouring, and dust can separate in a blend. Granulation binds the fines, cutting dust and easing flow, but it wets more slowly and gives a different sieve result.

The catalog appearance is off-white to light tan. Raw material, decolourisation and drying temperature all shift the colour, and a tan drift inside the range is not a failure. Odour is a fish note, stronger in a less refined lot and milder after a longer wash.

The powder dissolves in water and leaves a solution that is clear or only slightly turbid. Haze can come from undissolved fines, a coarser peptide fraction or a heavy mineral load; test in the matrix at the use concentration, not only at 1% in water.

The 80 mesh powder takes up moisture faster than the granulated form; granulation is not a barrier.

What the grade means in a capsule, tablet or blend

Capsules take the 80 mesh powder as it arrives. The fill weight is set by bulk density and the target peptide amount, and the capsule room needs to be dry because the powder pulls moisture from the air. A granulated grade can improve flow, but it changes the fill weight for the same volume and the label dose must be recalculated.

Tablets demand flow and compressibility; a hygroscopic fine powder can bridge in the hopper or cap. Granulation is the usual answer. In a blend, match the particle size of the other ingredients so the mix does not separate.

Ash matters most in a high-dose format. At the 10.0% limit, 5 g of powder carries up to 0.5 g of ash. That figure is not all sodium, but it is the mineral load the formula has to accept, and it is one reason a lower-ash grade needs more processing. A stick pack also has to accept the fish note and the colour in the finished drink.

What to write into the specification

  • “Fish protein peptides; name the species or species mix, the tissue and the country of origin.”
  • “Protein ≥80.0% by Kjeldahl; record the factor and whether the value is as-is or dry.”
  • “Peptide content ≥70.0% by HPLC; record the window and the integration method.”
  • “Ash ≤10.0%; moisture ≤7.0%; appearance off-white to light tan.”
  • “Particle size ≥95% through 80 mesh; granulation on request is a separate line.”
  • “Fish allergen statement, heavy metals, microbiology and the destination market as agreed.”
  • “Pack, storage condition and retest period for the pack on order.”

A specification that lists only “fish peptide 80%” has left the peptide, the ash, the source and the mesh open. Catalog values are on the fish protein peptides page; the COA page shows how each line is reported; the methods library explains the peptide distribution; the release file is described on the quality page.

When another grade is the wrong buy

A diluted powder is the wrong buy when the label declares a peptide amount per serving and the finished weight is fixed; the carrier has to be declared and the dose changes. A higher protein number is a false upgrade if the peptide figure drops, because the label would then buy nitrogen that is not in short chains. A granulated form is wrong for a process that needs a fast-dissolving fine powder and cannot wet granules.

The clearest wrong purchase is a different protein sold under the same name. Fish collagen peptides carry a collagen identity and a different nutrient profile, and a fish peptide label does not become a collagen label because the powder dissolves clearly. If the marketing story needs collagen, buy the fish collagen peptides product; if the formula needs a broader fish protein hydrolysate, keep the peptide grade and describe it accurately.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation