04 MOQ & ordering

Eggshell membrane collagen: MOQ, packs and lead time

Technical document 04 · Reviewed 2026-11-20 · Eggshell Membrane Collagen

On this page
  1. Why the minimum is 1 kg
  2. Packs and formats
  3. Lead time and dispatch
  4. What a quotation needs
  5. The sample is a lot, not a demonstration
  6. Terms to settle before the first order

The MOQ for eggshell membrane collagen is 1 kg, supplied in a 1 kg foil pouch; bulk orders use a 25 kg fiber drum. Lead time is 1–7 days for the standard 80 mesh powder. A firm quotation needs the specification, the pack, the destination and the document set, because the egg allergen statement and the hydrolysis enzyme are part of the offer rather than an afterthought.

In one line

The 1 kg pouch is the qualification unit for an eggshell membrane lot: enough for a trial, a retain and a certificate check before the 25 kg drum.

Why the minimum is 1 kg

A single pouch covers a bench trial, a retained sample and an independent identity check, and it can travel as an ordinary parcel when a formulator needs material ahead of a fixed production plan. The pouch is a commercial unit with its own lot code; it is not a scoop taken from a bulk drum.

Any quantity under a kilogram has to be taken out of a larger lot and put into a new container. The powder itself does not change, but the original pack identity is lost, extra handling is introduced and tracing the material back to its lot becomes harder. A 25 kg fiber drum is the bulk unit: it cuts the handling per kilogram, yet it ties up inventory and keeps the powder in storage for longer. The minimum is therefore a pack decision, not a volume incentive.

Packs and formats

Standard eggshell membrane collagen packs
PackNet weightTypical useNotes
Foil pouch1 kgTrial, sample, small batchMoisture barrier; reseal the pouch once opened
Fiber drum25 kgProductionInner liner; lot code on drum and liner
Granulated powderOn requestFlow and dust controlParticle profile changes; longer lead time
RepackOn requestBench trial below 1 kgA split lot; its own handling record

The catalogue form is an 80 mesh powder: ≥95% through 80 mesh. Granulation is a different specification, not a packing choice. If the dosage form needs a freer-flowing powder or a coarser granule, say so before the quotation, because the change moves the particle-size line and may move the lead time.

The 1 kg foil pouch is the moisture barrier for a hygroscopic powder; the seal is the weak point. The 25 kg fiber drum relies on its inner liner, so keep the liner closed and keep the drum off a concrete floor in a humid store. The lot code on the pouch, the drum, the liner and the certificate should match.

Lead time and dispatch

An order for the standard 80 mesh powder is quoted at 1–7 days from confirmation. Picking, preparing the documents and dispatch sit inside that window; transit, customs clearance and the buyer's own quality release do not. Granulation, a repack or a document set outside the standard file adds time, and the quotation should list that addition on its own line.

Ask for the dispatch date, not just the 1–7 day range. A 1 kg pouch usually moves as a parcel, while the 25 kg drum travels on a pallet; the Incoterm says who books the freight and who clears entry. The COA and the allergen statement should travel with the pack, not arrive after it.

What a quotation needs

Six items make a quotation firm enough to compare:

  1. Product and source. Hydrolysed eggshell membrane collagen, CAS 9007-34-5, eggshell membrane source named.
  2. Specification. Protein with its factor and basis, peptide content, molecular-weight cut, ash, mesh and the contaminant panel.
  3. Quantity and pack. A 1 kg foil pouch, a 25 kg fiber drum or a granulated grade.
  4. Destination and Incoterm. Country, port or address, and the trade term.
  5. Documents. COA, specification, SDS, the egg allergen statement, the hydrolysis enzyme and origin, and any market-specific statement.
  6. Intended use and market. Capsule, tablet or powder blend, and the market where it will be sold.

A quotation that leaves out the market, the membrane source or the allergen documents is incomplete. The same lot can fit one destination's file and sit outside another's, because the paperwork is part of the offer. Commercial terms are stated on the quotation; this page covers the pack and the specification.

The sample is a lot, not a demonstration

The pouch ordered at the minimum is the qualification sample. Before scaling, run protein, peptide distribution, loss on drying, ash, heavy metals and microbiology, and retain a portion from that same pouch. Sample, COA and quotation should carry one lot code. Material that cannot be tied to a lot is a demonstration rather than a qualification.

When a bench trial calls for less than a kilogram, the material is a repack and not the catalogue pouch. It comes out of a bulk lot, carries its own handling record and must not be described as the 1 kg foil pack. Request the split in writing and file its lot code beside the trial results. The powder weighed on the bench and the powder in the production drum can come from separate lots even where the specification is the same.

Terms to settle before the first order

Commercial and quality terms belong on one quotation: Incoterm, pack, dispatch window, the specification revision, a COA per lot, the retained sample, the retest period and the route for a change. Put them into a quality agreement before the first production order, because the same discussion is far harder once a dispute has started.

The change-control clause should name the source, the membrane preparation, the hydrolysis enzyme, the mesh and the pack. A change in any of them can move the allergen statement, the peptide distribution or the particle size, and the customer should hear about it before the lot ships rather than after.

When a lot fails the agreed specification, the retained sample and a joint re-test against the named method decide the question; a photograph of the drum does not. The quotation and the quality agreement should name the referee laboratory, say which lab both sides accept and state who pays for it. A return argued from appearance alone is difficult to defend for either party.

The product page carries the catalogue specification; the COA page lists the release tests; the compliance page covers the market files; the methods library defines the assays; the quality page describes the release file.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation