01 COA & batch testing

What the COA for donkey-hide gelatin peptides contains

Technical document 01 · Reviewed 2026-11-19 · Donkey-Hide Gelatin Peptides

On this page
  1. What belongs on the sheet
  2. Two figures with different arithmetic
  3. The gate and the measurement
  4. Where lots differ
  5. Outside testing
  6. Reading two certificates together

The certificate for a donkey-hide gelatin peptide lot has to answer two different questions. The first is what the powder is: a collagen hydrolysate from donkey hide, with a protein figure and a peptide fraction that belong together. The second is what else is in the drum: moisture, ash, metals, microorganisms and the particle-size cut. A certificate that answers only the first leaves the buyer unable to release the lot.

In one line

The two numbers that define this powder are a Kjeldahl protein figure with its nitrogen factor and an HPLC peptide content; a certificate that shows only one of them has described half the material.

What belongs on the sheet

Each line should be traceable to a method and to an agreed limit. “Conforms” is the end of the argument, not the argument; the reader needs the measurement and its method. For this material the sheet carries four groups: identity (protein and peptide profile, species statement), composition (protein, peptide content, ash, moisture), contaminants (metals, microbiology) and physical form (mesh).

The species statement is not covered by the identity row. A peptide profile can match a reference and still come from cattle hide; only the source record and a species test answer the animal question. The identity page explains why the two are separate lines.

Release parameters · donkey-hide gelatin peptides
ParameterMethodRelease limit
AppearanceVisualOff-white to light tan powder
IdentificationProtein and peptide profileConforms to the reference
ProteinKjeldahl, factor stated≥90.0%
Peptide contentHPLC distribution≥80.0%
AshGravimetric, furnace≤3.0%
MoistureLoss on drying≤7.0%
Heavy metalsICP-MSPb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg
MicrobiologyPlate count and enrichmentAPC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent
Particle sizeSieve analysis≥95% through 80 mesh

Two figures with different arithmetic

Protein is calculated from nitrogen. The laboratory digests the sample, measures the nitrogen, and multiplies by a factor. For gelatin and collagen the factor is 5.55, because the nitrogen content of the protein is near 18%; for a generic food protein it is 6.25. The choice changes the result by about 12.6%. A certificate that omits the factor leaves the reader guessing which arithmetic was used.

Moisture is the other half of the basis. The catalogue protein figure is dry-basis. A lot at 92.0% dry basis and 5.5% moisture is 86.9% as-is; the same lot is 92.0% only after the water is divided out. Specifications, labels and purchase orders should state the basis.

The peptide figure comes from a separation, not from nitrogen. HPLC resolves the hydrolysate by size, and the peptide content is the fraction that falls inside the agreed cut-off. Because the cut-off and the calibration define the answer, both belong in the method line. The reader should also know whether the percentage is on the powder or on the protein; the two bases give different numbers.

The gate and the measurement

A specification value is a gate. A batch value is a measurement. When the two are printed in the same column the reader cannot tell whether the lot was tested or merely promised. Keep them apart, and keep the method next to the number.

What the result column should contain · donkey-hide gelatin peptides
ParameterRelease limitResult column
Protein≥90.0% (factor and basis stated)A measured percentage with N × 5.55 and the basis
Peptide content≥80.0% by HPLCThe measured fraction, the cut-off and the calibration
Ash≤3.0%A measured percentage
Moisture≤7.0%A measured percentage
Heavy metalsPb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kgA measured figure per element
MicrobiologyAPC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absentA count plus the absence statement for the lot
Particle size≥95% through 80 meshThe measured percentage through the sieve

Microbiology needs a count and an absence statement; a single “pass” hides which organism was tested. Metals need a figure per element, because a total can sit inside the limit while one element is over it. The species line is different again: it is a declaration with a test behind it, not a numeric limit, and it should name the animal, tissue and origin.

Where lots differ

Hide is not a synthetic raw material. The animal's age and diet, the season, the liming and washing sequence and the extraction temperature all shift the composition before the hydrolysate is made. The hydrolysis step then sets the peptide curve; longer treatment shortens the chains and moves the HPLC distribution. Filtration removes the fine fraction; spray drying fixes colour, bulk density and moisture.

Appearance is a coarse guide. The catalogue window runs from off-white to light tan, and a lot inside that window can still differ in odour or in the way it dissolves. A darker powder may reflect a longer dry or a sugar reaction. That is not proof of a fault, but it is worth a retained sample and a question.

Ash is the process marker. The alkaline steps leave sodium salts, and a higher ash at steady protein points to washing or neutralisation rather than to the peptide. The mesh result moves with the mill, not with the chemistry.

Outside testing

An outside laboratory is useful when the buyer needs an answer the supplier's sheet does not give: a species claim on a new source, a first import into a regulated market, a disputed result. The panel should follow the question. For species, PCR on the hide or the gelatin intermediate, or marker peptides by LC-MS/MS when the DNA is degraded. For composition, hydroxyproline and the amino acid profile. For the process, the HPLC distribution with its cut-off. For safety, ICP-MS metals including chromium, and microbiology.

Chromium deserves a line of its own. A hide that has passed through a tannery can carry it, and neither the protein figure nor the peptide profile will show it. Ask for the detection limit with every screen; “not detected” without a limit says more about the method than about the lot.

If a result is disputed, the referee needs the retained sample, the specification and the supplier's certificate, and a test that discriminates between the possible causes. Repeating the same assay rarely settles the question.

Reading two certificates together

Line the two documents up by parameter, not by headline. Check the species and tissue, the factor and basis behind protein, the cut-off behind peptide, the hydroxyproline result, the metal panel (chromium included), the microbiology and the pack. Two sheets can both say 90% protein and describe different materials.

Then look behind the sheet: the manufacturing site, the hide supply, the hydrolysis and drying record. A certificate is only as good as its link to the lot that ships.

Catalogue ranges sit on the product hub; species tests on the identity page; the grade choice on the grades page; the market file on the compliance page. Method notes are collected in the methods library, and the release process is set out on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation