Donkey-hide gelatin peptide grades: powder, mesh and peptide curve
“Donkey-hide gelatin peptides” names a family of powders, not one specification. The hydrolysis depth, the mesh, the colour and the species file vary between lots that all clear the same protein and peptide floor. The grade is the combination that fits the dosage form and the label; the protein percentage is only the entry ticket.
The grade is the peptide curve, the mesh and the species record; the 90% protein headline is the floor that every grade has to clear.
A name, several powders
Gelatin from donkey hide is extracted, dried and then hydrolysed. Stop the hydrolysis early and the powder still contains long chains: it dissolves slowly, thickens a solution and can gel at higher concentrations. Take it further and the chains shorten: the solution stays thin and clear, the powder disperses faster, and the taste can turn slightly bitter. The catalogue requires ≥90.0% protein and ≥80.0% peptide, but those are floors. Two compliant lots can sit at opposite ends of the peptide distribution.
Gelatin itself is a different purchase. Bloom strength, gel time and clarity describe the intact protein; a peptide powder has no Bloom value to speak of because the network no longer forms. A formulator who needs a gelling agent should specify gelatin, and a formulator who needs a soluble powder should specify the hydrolysate. The two are not interchangeable by adjusting the dose.
The species file is the third variable. Protein and peptide figures cannot distinguish donkey hide from another hide, so the source statement and the test behind it belong in the grade definition, not in a footnote.
Specifications compared
| Grade | What changes | Fits | Watch |
|---|---|---|---|
| Standard peptide powder | Base hydrolysate, ≥95% through 80 mesh | Capsules, sticks, general powders | Moisture pickup, dust |
| Granulated | Agglomerated from the base, coarser particle | Sachets, tablets, spoonable powders | Granulation aids, dispersion time |
| Higher peptide fraction | Agreed ≥85% by HPLC with a stated cut-off | Clear drinks, concentrated formats | Yield, odour, bitterness |
| Finer molecular-weight curve | Agreed distribution, more mass below the cut-off | Clear beverages, rapid dissolution | Foam, haze, filtration load |
| Low-colour grade | Agreed colour, decolourised | Light drinks and gels | Process loss, colour drift |
These are alternative specifications, not a ladder. Each needs its own certificate language: the HPLC cut-off, the mesh, the colour window and the species statement.
Particle size, colour and flow
The standard powder passes 80 mesh almost completely, which makes it fine enough to disperse quickly and light enough to hang in the air when poured. Fine particles can also form lumps when they meet water, because the outer layer hydrates before the core wets. Granulation solves that by building larger, porous particles: the powder flows, dusts less and wets more evenly, though it takes a little longer to dissolve.
Colour and smell track the hide and the drying step. The standard range is off-white to light tan. A decolourised grade exists for drinks where the powder must not tint the liquid, and it usually gives up some yield in exchange. Odour is the harder attribute to put in a specification and the easier one for a consumer to notice, particularly in an unflavoured stick.
All of these powders attract water. The finer the powder, the faster the pick-up, so the pouch and the in-use period are part of the choice.
Matching the dosage form
A capsule is limited by bulk density: the fill weight decides how many capsules a dose needs. A tablet is limited by flow and compression; a granulated grade is usually easier to run than a fine one. A stick pack is limited by dispersion and foam, and a fine powder can foam when the consumer shakes it. A clear drink is limited by haze, which depends on the peptide curve, the pH and the minerals together. A gummy is limited by water activity and by the browning reaction between the peptide and reducing sugars.
Trials should use the grade that will go into production, at the concentration the label will declare. Results from a finer or coarser grade do not transfer, and a certificate cannot predict them.
Writing the line items
- “Hydrolysed gelatin peptides, donkey hide (Equus asinus); species, tissue and origin declared.”
- “Protein ≥90.0% by Kjeldahl, N × 5.55, dry basis.”
- “Peptide content ≥80.0% by HPLC; the cut-off and calibration are named.”
- “Ash ≤3.0%; moisture ≤7.0%.”
- “≥95% through 80 mesh, or the granulated equivalent agreed in writing.”
- “Species record on file; PCR available on request.”
These lines give a second laboratory enough to reproduce the decision. A specification that stops at the protein range does not.
When the standard powder is the right buy
Most capsules and flavoured powders do not need a special grade. The standard 80 mesh powder disperses, mixes and fills adequately, and it carries the fullest documentation. A finer or decolourised grade is justified when the format has a real constraint: a clear drink, a high-concentration stick or a colour-sensitive gel.
Granulation earns its place only when flow or dust is the problem. A gelling application needs gelatin, not a peptide. And if the label will carry the word “ejiao”, the species record and the market file must support it; another species' collagen cannot stand in. The Ejiao versus collagen comparison covers that choice.
The ranges are on the product page; the analytical lines are on the COA page; the identity tests are on the identity page; the market file is on the compliance page. Method notes are in the methods library, and the release process is on the quality page.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation