Collagen tripeptide: MOQ, packaging and ordering
Collagen tripeptide is supplied in two pack sizes: a 1 kg foil pouch, which is also the minimum order, and a 25 kg fiber drum. Lead time for either standard pack is 1–7 days from confirmation. A quotation only becomes comparable when it names the tripeptide and peptide figures, the source, the pack, the destination and the documents.
The minimum is a pack decision: 1 kg is the smallest unit that carries its own lot code, retained sample and certificate.
Why 1 kg is the floor
Ordering by the kilogram is a consequence of how the material is made and released, not a sales threshold. A batch is blended, sampled, tested and packed as a lot, and the smallest pack that can carry that identity is the 1 kg pouch. Open a 1 kg pouch and you have a traceable sample, a trial quantity and a retained portion from the same lot code.
A smaller request usually turns into a repack. The powder is drawn from a larger lot, put into a bag that did not exist in the batch record, and shipped with either a copy of the parent certificate or no certificate at all. The chemistry does not change; the traceability does. If a few hundred grams are enough for a bench trial, ask for the split in writing and have the parent lot code on the label.
At the other end, the 25 kg drum lowers handling per kilogram but ties up inventory. It suits a production campaign that will consume the drum inside its retest period. The choice between pouch and drum is therefore a storage and consumption decision as much as a quantity decision.
Packs and formats
| Pack format | Quantity | Where it fits | Handling |
|---|---|---|---|
| Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; close it between weighings |
| Fiber drum | 25 kg | Production campaign | Lined; lot code repeated on drum and liner |
| Granulated grade | On request | Flow and dust control | Different particle profile; aids declared |
The standard powder passes 80 mesh. That is a finishing specification, and it is the right one for capsules, tablets and most stick fills. Granulation is a separate specification, not an alternative bag: it changes the particle-size line, adds a processing step and may add an aid that has to appear on the specification. Say which one the line needs before the quotation, because the answer changes both the lead time and the particle-size line.
Pack and storage should be chosen together. A pouch that will be opened weekly for a small trial is better than a drum that stays half-used for months; a drum that will be consumed in one campaign is better than twenty pouches. Neither removes the need for a dry, cool store, because the powder is hygroscopic.
From confirmation to dispatch
The 1–7 day window covers picking, document preparation and hand-over to the carrier. It does not include transit, customs or the customer's own quarantine and release. When the material is needed for a production date, ask for the dispatch date in writing and work backwards through the transport and the internal release, not forwards from the order date.
Pouch and drum travel differently. The pouch is a parcel; the drum goes on a pallet and needs the right Incoterm to say who books it and who clears it. The certificate, specification, SDS and allergen statement should be sent with the shipment or ahead of it. A COA that arrives after the drum has been quarantined delays the release even when the material is correct.
Six details a quotation needs
- Material and fraction. Collagen tripeptide, with ≥30.0% tripeptide by HPLC and ≥80.0% peptide by SEC-HPLC named on the offer.
- Source. Species and tissue, because the allergen statement and the label follow from them.
- Pack and particle form. 1 kg pouch or 25 kg drum; 80 mesh powder or a granulated grade.
- Quantity and destination. The number of packs, the country and the Incoterm.
- Documents. COA, specification, SDS, allergen, GMO and origin statements, plus any market declaration.
- Use and market. The category the material goes into and the country where the finished product will be sold.
An offer that lists a protein percentage and a bag size has not quoted this product. The tripeptide figure, the source and the destination are part of what is being sold; without them the buyer cannot check the material against the label or the market file.
A sample that can be qualified
Take the qualification sample from a released lot, not from a hand-filled bag at the end of a shift. Record the lot code, the date of opening and the condition of the pack, then test the tripeptide content, the peptide distribution, protein, loss on drying and microbiology. If the sample passes, the same lot code should appear on the first commercial pack.
Keep a portion of the sample under the specified storage condition. It becomes the comparator if a later lot behaves differently in dispersion, colour or taste. A retained sample without a lot code is a souvenir; one with a code is the start of the batch file.
For a trial that needs less than a kilogram, record the split as its own pack. It has an opening date, a handling history and a shorter useful life than the sealed pouch. Write those facts into the trial record rather than assuming the parent certificate covers the repack indefinitely.
What the quality agreement should settle
Before the first production order, put the specification revision, the per-lot COA, the retained sample, the retest period and the change-notification route in one document. Add the name of the referee laboratory both sides accept and the procedure for a joint re-test. Those are the clauses that matter when a result is disputed; they are much harder to negotiate after a drum is on hold.
Change notification deserves its own line for this product. A new source, a different membrane cut or a changed drying step can move the tripeptide figure even when the protein result looks familiar. The buyer should hear about the change before the next shipment and receive a new specification revision and a COA that reflects it.
The catalogue specification is on the collagen tripeptide product page. Release tests are set out on the COA page, the market file on the compliance page, the definition of the minimum in the MOQ glossary entry, and freight in the logistics section.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation