04 MOQ & ordering

Bone collagen peptides: MOQ, packaging and ordering

Technical document 04 · Reviewed 2026-11-19 · Bone Collagen Peptides

On this page
  1. Why the minimum is one kilogram
  2. Packaging
  3. Lead time
  4. What a quotation needs
  5. Samples
  6. Where the terms end

The minimum order is 1 kg in a foil pouch; production quantities ship in 25 kg fiber drums, with a 1–7 day lead time on the standard 40 mesh powder. A 1 kg order is drawn from a production lot, so it carries the same specification and the same batch documents as the drum. What takes longer than the packing is the document set and any custom mesh or granulation.

In one line

One kilogram is the trial pack and the 25 kg drum is the production pack; the order is settled by the specification and the file, not by the minimum.

Why the minimum is one kilogram

One kilogram is enough for a bench trial, a small capsule run and a customer sample, and it is small enough to be filled from a production lot rather than made as a separate batch. That distinction matters: a trial pack is a repack, not a pilot batch, so the material in the pouch and the material in the drum come from the same hydrolysis and the same dryer. The specification does not change with the pack size.

The minimum is therefore a service level rather than a grade. A buyer who needs 1 kg to run a sensory panel and a buyer who needs a pallet of drums are ordering the same catalogue material, with the same COA format and the same TSE declaration. The difference is the packing step and the documents that go with the shipment.

Packaging

Standard packs · bovine bone collagen peptides
PackNet contentFormatUse
Foil pouch1 kgSealed foil laminateTrial, sample, small run
Fiber drum25 kgDrum with food-grade linerProduction

The standard powder is ≥95% through 40 mesh. Agglomerated and low-dust granulated forms are available on request; both change the packing step and usually the lead time, because they are made to order rather than drawn from stock. Every pack carries the lot number, the net weight and the storage condition, and the lot number matches the one on the COA and the retained sample.

The liner is part of the moisture control described on the stability page. A drum that is opened and left open in a humid room will pick up water at the surface even if the bulk stays within the 7.0% loss-on-drying limit.

Lead time

The standard lead time is 1–7 days. The lower end applies to the 1 kg pouch and to drums held in stock; the upper end applies when the order needs a custom mesh, a granulated form, a third-party test or a full export document set. The clock starts when the specification and the purchase order agree, not when the enquiry arrives, because a specification change after that point restarts the packing and the paperwork.

Two things routinely add days without appearing on the quotation. The first is a document that has to be issued for the destination, such as a legalised declaration or a certificate of origin. The second is a test the buyer asks for on the shipping lot rather than accepting the routine COA. Both are worth raising at the quotation stage so the delivery date is built on the real sequence.

What a quotation needs

A quotation for this material is only comparable when it answers six questions. The table lists them in the order that avoids a second round.

Six details a complete quotation answers
ItemWhat to state
SpecificationProtein factor and basis, hydroxyproline method, SEC cut-off, ash limit, mesh
Quantity and pack1 kg pouch, 25 kg drum, or a mix; number of packs
Source and tissueBovine, bone, country of origin, BSE/TSE declaration
DeliveryDestination, Incoterm, and who arranges the booking
DocumentsCOA, TDS, SDS, TSE statement, allergen statement, certificates
SampleWhether a 1 kg trial is included and which lot it comes from

Samples

A 1 kg sample is the practical unit for a first evaluation. Ask which lot it came from and request that lot's COA, because a sample drawn from an earlier lot will not predict the next production run. Run the sample in the real matrix at the real dose: a powder that disperses in water can still settle in a flavoured drink, and a colour that looks acceptable in a white powder can show in a clear liquid.

Keep part of the sample as a reference. When the first production drum arrives, the reference lets the buyer compare odour and colour side by side instead of relying on memory. The COA page lists the lines that should match, and the identity page covers the tests worth repeating on a new source.

Where the terms end

The order fixes the specification revision, the pack, the lead time, the document set and the storage condition. It also fixes the quantity tolerance and the shelf life at dispatch; both belong in the purchase order rather than in an email. A specification revision after the order is a new agreement, not a clarification, because it can change the COA, the label and the TSE declaration.

Commercial terms are confirmed in the quotation and the contract. This page states the pack sizes, the minimum and the lead time so the enquiry can be framed correctly; it does not state a figure for the material, because that depends on quantity, pack and destination. For the source decision behind the order, see the grade comparison; for the file that ships with it, see the compliance page; for the definition of the minimum, see the MOQ glossary entry.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation