Sodium citrate grades: the dihydrate, the anhydrous salt and the physical form
Sodium citrate is bought as the trisodium salt in one of two hydrate states: the dihydrate, which is the commercial standard, and the anhydrous salt. The choice fixes the sodium per gram, the water result on the certificate and the mass that delivers a given sodium dose. The physical form — a 40 mesh powder or coarser crystals — fixes flow, dust and the tablet or stick-pack process. “Sodium citrate” on a purchase order specifies none of these.
The hydrate is the specification: the dihydrate carries 12.25% water and 23.45% sodium, and the anhydrous salt carries no crystal water and 26.72% sodium.
Why the name covers several grades
Citric acid has three carboxylic groups, so sodium can replace one, two or all three protons. Monosodium citrate, disodium citrate and trisodium citrate are three different salts with different sodium figures and different solution pH values. Each also has its own hydrate forms: trisodium citrate crystallises as a dihydrate, disodium citrate as a sesquihydrate, and monosodium citrate in both anhydrous and hydrated forms. The commercial supplement and food ingredient is almost always trisodium citrate dihydrate.
A second distinction is paperwork rather than chemistry. The same dihydrate can be sold against a food-additive monograph or against a supplement specification, and the two files carry different limits, different labelling and different names on the label. The powder can be identical; the destination route is not.
The third distinction is physical. A crystallised dihydrate can be milled to 40 mesh, left as crystals, or granulated to change flow. Each is a separate line on the specification, and a change of mill or sieve is a change of grade even when the chemistry is untouched.
Dihydrate and anhydrous side by side
| Property | Dihydrate | Anhydrous |
|---|---|---|
| CAS number | 6132-04-3 | 68-04-2 |
| Formula | C6H5Na3O7·2H2O | C6H5Na3O7 |
| Molecular weight | 294.10 | 258.07 |
| Sodium by mass | About 23.45% | About 26.72% |
| Water of crystallisation | 11.0–13.0% | No crystal water; a low limit is agreed |
| Assay basis | Anhydrous, with water reported | As weighed, water is low |
| Behaviour in a dry blend | Stable; cakes in a humid store | Takes up water readily |
| Usual use | The standard commercial grade | Where water in the formula is unwanted |
The table is the whole decision in eight lines. The dihydrate is 12.25% water by formula, so a kilogram of it contains 877.5 g of sodium citrate and 122.5 g of water. The anhydrous salt is the same molecule without that water, which is why it carries more sodium per gram and why it is the more hygroscopic of the two.
Solubility, alkalinity and the physical form
The dihydrate dissolves freely in water and is practically insoluble in ethanol. A 5% solution reads about pH 8.3, and the pharmacopoeial window of 7.5–9.0 for a 5% solution is wide enough to cover the variation from residual acid or carbonate. That alkalinity is a property of the salt, not an additive: the citrate anion is the conjugate base of citric acid, so the solution resists a fall in pH until the buffer is exhausted.
The catalog form is a 40 mesh powder, ≥95% through 40 mesh. A finer powder disperses faster and dissolves faster, but it dusts and it cakes harder under pressure. Coarser crystals flow better and dissolve more slowly, which matters in an effervescent tablet where the citrate must dissolve at the same time as the acid and the bicarbonate. Granulation is a third option when the blend needs a free-flowing particle; it changes the particle-size line and usually the lead time.
Bulk density and flow are not on the catalog sheet. If the process is a direct-compression tablet or a high-speed sachet line, ask for those figures on the sample, not on a generic data sheet.
Sodium per gram and the mass per serving
The label arithmetic starts with the sodium figure. One gram of dihydrate delivers 234 mg of sodium; one gram of the anhydrous salt delivers 267 mg. To put 200 mg of sodium into a serving, the formulator weighs 200 ÷ 0.234 = 855 mg of dihydrate, or 200 ÷ 0.267 = 749 mg of anhydrous salt. A label that changes the hydrate without changing the weigh-up moves the sodium by 12–14%.
The same arithmetic runs the other way. A formula that declares 500 mg of sodium citrate dihydrate delivers 117 mg of sodium; the same 500 mg of the anhydrous salt delivers 134 mg. Neither figure is a recommendation, and the finished product's status is a separate legal question; the numbers are what keep the label, the weigh-up and the certificate on one basis.
The dosage form decides which physical grade is practical. A capsule takes the 40 mesh powder and a fill weight sized on the dihydrate. A stick pack takes the same powder but needs a seal that keeps humidity out, because the powder cakes once it takes up water. An effervescent tablet takes a coarser, free-flowing grade and depends on the citrate dissolving with the acid and bicarbonate. A liquid takes either hydrate, because the water is already there.
What to write into the specification
- “Trisodium citrate dihydrate, C6H5Na3O7·2H2O, CAS 6132-04-3.”
- “Assay 99.0–100.5% by titration on the anhydrous basis; water 11.0–13.0% by Karl Fischer.”
- “Sodium 22.5–24.0% on the powder as weighed, with the basis stated on the certificate.”
- “pH of a 5% solution 7.5–9.0; identification by infrared spectrum and the citrate reaction.”
- “Particle size ≥95% through 40 mesh, or the crystal or granulated grade agreed in writing.”
- “Heavy metals and microbiology as listed; chloride limit stated if the route requires one.”
A specification that names only “sodium citrate” and a mesh has left the hydrate, the sodium basis and the chloride question open. Those three lines are what a buyer is actually buying.
When the other grade is the wrong choice
The anhydrous salt is the wrong choice when the process is a dry blend that will sit in a humid store: it takes water back and cakes sooner than the dihydrate, and the water result on arrival may no longer match the release certificate. It is the right choice when the formula cannot accept the 12.25% crystal water, or when a higher sodium per gram shortens the tablet.
The dihydrate is the wrong choice when the sodium load is the constraint. A gram of the dihydrate still carries 234 mg of sodium, and no grade of sodium citrate removes it; the answer there is a different salt. The potassium citrate page covers the potassium salt of the same anion, and potassium gluconate covers the lower-potassium-per-gram alternative.
For the sodium-versus-chloride question, the level-four comparison sets out sodium per gram, taste and acid load. Catalog ranges sit on the product hub; the COA page shows how each grade is reported; packs and lead time are on the MOQ page.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation