Potassium chloride grades: mesh, granulation and the fill
Potassium chloride has one salt form and no hydrate, so a grade is a particle size and a purity route, not a different potassium content. The catalog material is a white powder at ≥95% through 80 mesh; a granulated form is available on request for flow. Both carry the same theoretical 52.45% potassium, so the choice turns on dust, flow, dissolution and the dosage form rather than on potency.
Potassium chloride has no hydrate to choose, so the grade is the mesh and the granulation: the potassium figure stays at 52.45% while the flow, the dust and the fill change.
Why the grade question looks different here
Many mineral salts reach the buyer as a hydrate, and the hydrate then becomes the first grade decision. Potassium chloride does not: it crystallises as the anhydrous salt, KCl, CAS 7447-40-7, with a formula mass of 74.55. There is no hydrate to specify and no water of crystallisation to shift the figure. The salt name is complete; what remains is the physical form and the purity route.
Because the chemistry is fixed, a buyer may assume any white potassium chloride powder is interchangeable. It is not. An 80 mesh powder, a granulated product and a technical-grade salt can share the same formula and still behave differently in a hopper, a capsule or a stick pack, and only one of them belongs in a food or supplement. The grade is the finishing specification plus the purity standard, not a second salt.
Potassium citrate is sold as a monohydrate or an anhydrous salt, and that choice moves the potassium per gram; the chloride has no such choice, so its mesh question matters more. The potassium citrate page shows the hydrate arithmetic on the other side.
Powder, granulation and the purity route
The catalog offers the 80 mesh powder as the standard line and granulation on request. Both are potassium chloride; the particle-size distribution changes the dust, the flow and the dissolution time. A granulated product is not a diluted one.
| Format | Particle size | Flow and dust | Typical use | Pack |
|---|---|---|---|---|
| Powder | ≥95% through 80 mesh | Free-flowing; some dust in handling | Capsules, dry blends, stick packs | 1 kg pouch; 25 kg drum |
| Granulated | Coarser, on request | Better flow; less dust; slower to dissolve | Tablets, blends, shaker and salt applications | 25 kg drum |
The mesh is a release line, so it belongs in the purchase order and on the certificate. “Potassium chloride, powder” without a mesh lets the supplier ship a coarse or a fine lot, and the fill trial may fail for a reason unrelated to the assay. If the process needs a specific cut, write the sieve and the percentage through it.
Solubility, caking and the chloride solution
Potassium chloride is freely soluble in water, about 34 g per 100 mL at 20 °C, and the solution is neutral. The neutral solution suits a stick pack or an electrolyte blend because the salt does not shift the pH. The same chloride makes the solution aggressive to ordinary 304 stainless steel, so a plant that holds a concentrated brine needs 316L contact parts and a cleaning regime that removes the residue.
The solid is hygroscopic at high humidity. Above roughly 85% relative humidity at room temperature it draws water, and a powder at 80 mesh has enough surface area to cake before a granulated product does. Caking is physical, not a chemical change, but it costs the flow the filling line depends on. An opened pouch in a humid room is the usual route: the top layer gains water and the next scoop is a lump.
Light is not a degradation driver for this salt. A clear container is still a poor choice for moisture. The pack should be a moisture barrier, and the store should be dry and stable in temperature; a cold pouch brought into a warm room can collect condensation on the powder before it is opened.
The potassium arithmetic and the dosage form
The label dose is elemental potassium, not salt weight. One gram of potassium chloride carries 524.5 mg of potassium, so a 99 mg potassium serving needs 189 mg of the salt and a 500 mg serving needs 953 mg. A 500 mg capsule fill carries about 262 mg of potassium as the chloride; the same 500 mg as potassium citrate monohydrate would carry only about 181 mg.
The dosage form decides the grade. A capsule or a direct-compression tablet wants a free-flowing powder with a consistent bulk density, and a granulated product can feed a tablet press better. A stick pack or a dry blend usually wants the 80 mesh powder, because it disperses quickly when the consumer adds water. A granulated product in a stick can leave a gritty residue and take longer to clear.
Taste is part of the fill decision. Potassium chloride is salty with a bitter, metallic note that grows with the dose; at 953 mg per stick it is hard to hide behind a fruit flavour. The chloride load and the pH consequences are set out on the chloride versus citrate page.
In an electrolyte blend, the potassium chloride may sit beside potassium citrate, sodium chloride and magnesium salts. Each contributes potassium or sodium, the label has to name each source, and the blend's flow belongs to the blend, not the chloride alone.
What to write into the specification
- “Potassium chloride, CAS 7447-40-7, KCl, food or supplement grade.”
- “Assay 99.0–101.0% by titration, with the basis stated on the certificate.”
- “Potassium 52.0–55.0% by flame photometry; report the method and the standard.”
- “Loss on drying ≤0.5%; heavy metals and microbiology as listed.”
- “Particle size ≥95% through 80 mesh, or the agreed granulation cut.”
- “Pack: 1 kg foil pouch or 25 kg fiber drum with a closed liner.”
- “Store sealed and dry; the pack and the storage condition are part of the specification.”
When another grade or salt is the wrong choice
A technical grade is the wrong choice for any food or supplement use; its contaminant and trace-metal profile was not set for that route. A granulated product is the wrong choice where the powder must dissolve quickly in a stick or a dry mix, unless a trial shows the granulation clears in the intended time. And a coarse cut is the wrong choice for a capsule fill that was sized on an 80 mesh powder.
Potassium chloride itself is the wrong salt where the formula cannot carry chloride or needs an alkaline buffer. In that case the citrate is the starting point, not a chloride with a pH adjuster added afterwards. A switch in either direction changes the mass, the taste, the pH and the label, and it belongs in change control.
The catalog line is on the potassium chloride product page; the release tests are on the COA page; the pack and the moisture question are on the stability page; the release workflow is described on the quality page.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation