Ferric pyrophosphate vs ferrous fumarate: iron content, oxidation and the label
Ferric pyrophosphate carries 24.0–26.0% elemental iron; ferrous fumarate carries about 33% by formula, so a smaller mass of the fumarate delivers the same iron figure. The difference that matters is not the number but the oxidation state: the ferric salt is already oxidised and practically insoluble, while ferrous fumarate supplies iron in the ferrous state, which takes part in redox chemistry in a moist or acidic matrix. The label names the salt, and the two are separate entries on the EU list.
Ferrous fumarate carries more iron per gram; ferric pyrophosphate carries its iron already oxidised, and the label has to name which one is in the capsule.
Two iron sources, two chemistries
Both are iron salts used in supplements, and they have almost nothing else in common. One is a ferric pyrophosphate built on Fe(III) and a pyrophosphate anion; the other is a ferrous salt of fumaric acid. The names are not interchangeable in a specification, a purchase order or an ingredient list.
| Property | Ferric pyrophosphate | Ferrous fumarate |
|---|---|---|
| Formula | Fe₄(P₂O₇)₃·xH₂O | C₄H₂FeO₄ |
| CAS | 10058-44-3 | 141-01-5 |
| Iron valence | Fe(III) | Fe(II) |
| Iron content | 24.0–26.0% | About 32.9% by formula |
| Appearance | White to yellowish powder | Reddish orange to red-brown powder |
| Solubility in water | Practically insoluble | Sparingly soluble |
| Usual form | Micronized powder, 200 mesh | Powder, often directly compressible |
The colour difference is the fastest field check and the weakest one. It tells the two apart when the materials are pure, and it tells nothing when a blend or a coated particle is in the drum.
Elemental iron and the mass on the scale
The label declares elemental iron; the formulator weighs salt. The conversion is a division: material mass = target iron ÷ assay. A 25% ferric pyrophosphate needs 56 mg of powder to declare 14 mg of iron, while a 32.9% ferrous fumarate needs about 43 mg. The gap is roughly a quarter of the powder mass, and it grows with the dose.
| Target iron | Ferric pyrophosphate at 25.0% | Ferrous fumarate at 32.9% |
|---|---|---|
| 5 mg | 20 mg | 15.2 mg |
| 10 mg | 40 mg | 30.4 mg |
| 14 mg | 56 mg | 42.6 mg |
| 18 mg | 72 mg | 54.7 mg |
| 20 mg | 80 mg | 60.8 mg |
Use the assay on the certificate in front of you, not the midpoint of a catalogue window. A ferrous fumarate lot at 31% iron needs more powder than one at 33%, and the difference in a 20 mg dose is enough to change a capsule size. The same arithmetic works in reverse when a label is checked against the batch record.
Oxidation, colour and mobile iron
Ferrous iron oxidises. In a moist powder or an aqueous mix, Fe(II) converts to Fe(III), and the colour moves with it: a reddish powder darkens, while the iron assay may still read correctly because the element has not gone anywhere. Ferric pyrophosphate starts at Fe(III), so that particular drift is not available to it.
Iron also catalyses the oxidation of lipids and some vitamins, and the rate depends on how mobile the iron is rather than on the total. A dissolved ferrous salt offers more mobile iron than an insoluble ferric particle. The ferric advantage is not absolute: ascorbic acid and some reducing sugars can bring Fe(III) back to Fe(II), and a low pH can dissolve part of the pyrophosphate. In a formula that combines the salt with ascorbic acid and water, the chemistry has to be tested rather than assumed.
What each source asks of the matrix
Ferrous fumarate is sparingly soluble, so it fits capsules and tablets, but its colour constrains pale products and the taste carries through in a chew or a stick pack. Ferric pyrophosphate is white to yellowish and practically insoluble, which suits pale powders, capsules and suspensions, but the particles settle and the mix needs a dispersion step.
A tablet or a capsule is the easier home for either salt. A drink mix or a beverage is where the differences show: colour, sediment, mouthfeel, and the rate at which the iron changes state. Run the trial in the matrix, with the salt at its real share of the formula, rather than in water alone.
Label wording that changes with the salt
In the European Union, Annex II to Directive 2002/46/EC lists ferrous fumarate and ferric diphosphate (ferric pyrophosphate) as separate entries. The ingredient list must use the name of the form actually present, and the nutrition declaration gives elemental iron in mg and as a share of the 14 mg reference intake. The Annex II entry explains the list, and the compliance page sets out the wider file.
In the United States, the Supplement Facts panel gives elemental iron against an 18 mg Daily Value, while the ingredient list carries the salt name. If a product contains both, both are named. A supplier's certificate that says "iron" does not settle which salt the label should carry, and swapping one for the other is a relabelling exercise as well as a formulation change. The percentage of the reference intake has to be recalculated from the elemental figure, never from the salt mass.
When to choose which
Choose ferric pyrophosphate when the formula needs a pale, low-solubility iron source and the process can handle a dispersion. Choose ferrous fumarate when the higher iron fraction and a compact tablet or capsule matter, and the colour and taste fit the product. The market's list, the label and the sensory trial belong in the same decision as the chemistry.
This page makes no health claim for either salt. The choice is about chemistry, colour, process and label, and the two materials are not interchangeable gram for gram: the iron figure, the valence and the permitted name all change with the swap. The product page carries the ferric specification; the grade page covers mesh and density; the identity page shows how the ferric salt is proved; the stability page covers the matrix. The iron measurement is described in the ICP-OES note.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation