Calcium malate grades: neutral salt, acid salt and mesh
Calcium malate is sold as the neutral salt, C4H4CaO5, which carries 23.3% calcium, but the name is also used for the acid salt calcium hydrogen malate at 13.1% calcium, for hydrated or diluted powders, and for different meshes. The calcium figure and the loss on drying on the certificate identify which of these is in the drum. The label has to name the same salt that the specification describes.
Calcium malate is sold by its calcium figure, and the figure separates the neutral salt from the acid salt, a hydrate and a dilution.
One name, several compositions
The neutral salt has one calcium ion for each malate dianion. Its formula is C4H4CaO5, its formula weight is 172.15, and its calcium content is 23.28%. That is the material described on this page: an anhydrous powder with a calcium window of 22.0–24.0% and a loss on drying of not more than 2.0%.
Calcium hydrogen malate is a different salt. Two hydrogen malate anions balance one calcium ion, giving (C4H5O5)2Ca, a formula weight of 306.25 and a calcium content of 13.09%. It appears in the food-additive monographs as a separate entry, and it is not the neutral salt in this catalog. A quotation that promises 13% calcium is quoting that salt, a hydrate or a dilution, not the 23% material.
Water and carriers move the calcium figure in the same direction. A hydrate keeps the salt name but adds mass that carries no calcium, so the figure per gram falls and the loss on drying rises. A diluted powder adds a carrier, which has to appear on the label. Granulation changes flow and dust without changing the chemistry, so it is a physical grade rather than a different salt.
None of these is a purity tier. They are different powders with different arithmetic, and the certificate is where the arithmetic is checked.
The forms side by side
| Form | Formula | Calcium | Loss on drying | What changes |
|---|---|---|---|---|
| Neutral calcium malate, anhydrous (catalog) | C4H4CaO5 | 23.3% theoretical; 22.0–24.0% specified | ≤2.0% | The supplement salt described here |
| Calcium hydrogen malate | (C4H5O5)2Ca | 13.1% theoretical | ≤2.0% in the additive entry | A different salt, label name and dose mass |
| Hydrated calcium malate, if offered | C4H4CaO5·nH2O | Below 23.3% | Above 2.0% | Same salt name, more mass per dose |
| Diluted calcium malate | Salt plus carrier | Below 22.0% | Depends on the carrier | The carrier must be declared |
| Granulated calcium malate | C4H4CaO5 | 22.0–24.0% | ≤2.0% | Same chemistry, better flow |
The first column is not a menu of equivalents. Only the neutral anhydrous salt matches the catalog specification; the other rows describe what a buyer may be offered under a similar name, and each one needs its own certificate and label check.
Solubility, taste and flow
The neutral salt is slightly soluble in water: about 0.8 g per 100 mL at room temperature, rising with temperature and with acidity. That is roughly ten times the solubility of calcium citrate tetrahydrate and several hundred times that of calcium carbonate. The difference is visible in a drink or a stick, where the malate can dissolve at a low dose and the carbonate stays in suspension.
Taste follows the salt. Calcium malate is described as neutral, slightly salty or faintly bitter; calcium citrate is saline and sour; calcium carbonate is chalky. In a capsule the difference is hidden, but in a chew, a stick or a flavoured powder it decides whether the format works.
Flow and density are physical grades. The catalog powder passes 95% through 40 mesh, and a granulated version flows better and makes less dust. Granulation does not change the calcium figure or the solubility, but it can change the fill weight and the tablet speed. Name the mesh and the granulation in the purchase order, not only the salt.
The carbonate page and the citrate page carry their own calcium and solubility figures for comparison.
What the grade does to the dose
A 500 mg calcium claim needs about 2.15 g of the neutral salt at 23.3% calcium, about 3.82 g of calcium hydrogen malate at 13.1%, about 2.33 g of calcium citrate tetrahydrate at 21.5%, or 1.25 g of calcium carbonate at 40.0%. The acid salt is impractical in a capsule at that claim; the neutral salt needs three or four size 00 capsules, and the carbonate needs two.
A 1,000 mg tablet of the neutral salt carries about 233 mg calcium; the same tablet weight of carbonate carries about 400 mg. A stick can carry 2.15 g of the malate without difficulty, and its solubility helps at a low dose, but the flavour and the acidulant still have to be tried. The grade decision is a mass decision before it is a taste decision.
If the label claims a calcium figure, the weigh-up follows the calcium window of the lot, not the theoretical figure. A lot at 22.0% calcium needs more powder for the same claim than a lot at 24.0%. Use the certificate figure for the batch record and the specification midpoint for the label design.
Writing the grade into the specification
- “Calcium malate, neutral salt, C4H4CaO5, CAS 17482-42-7.”
- “Calcium 22.0–24.0% by complexometric titration; assay 98.0–102.0% by HPLC, with the basis stated.”
- “Loss on drying ≤2.0%; identification by infrared spectrum and HPLC.”
- “Particle size ≥95% through 40 mesh; granulation and mesh named if different.”
- “No calcium carbonate, calcium citrate, calcium hydrogen malate or carrier added,” unless a granulation aid is declared.
- “Heavy metals and microbiology as listed; destination market confirmed before the order.”
The exclusion clause matters because the calcium window alone can be met by a blend. A powder that mixes the neutral salt with a little carbonate can land at 24% calcium while the malate assay falls; the two lines together are harder to satisfy with a blend than either one alone.
The catalog figures are on the calcium malate product page. The certificate lines are explained on the COA page; the elemental-calcium arithmetic is set out on the malate versus carbonate page; the label and market rules are on the compliance page. The difference between a hydrate and an anhydrous salt is defined in the hydrate entry.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation