02.1 Threonate vs citrate

Calcium L-threonate vs calcium citrate: elemental calcium, solubility and the label

Technical document 02.1 · Reviewed 2026-11-19 · Calcium L-Threonate

On this page
  1. Elemental calcium per gram and per claim
  2. From the label claim to the weigh-up
  3. Solubility: freely soluble against sparingly soluble
  4. What the label has to say
  5. When to choose which
  6. What to check on the certificate

Calcium L-threonate carries 12.0–13.5% elemental calcium; calcium citrate tetrahydrate carries 21.0–22.0%. A 200 mg calcium claim therefore needs 1.48–1.67 g of the threonate or 0.91–0.95 g of the citrate. The threonate dissolves freely in water while the citrate is only sparingly soluble, so the choice changes the dosage form and the label before it changes anything else.

In one line

The threonate carries about 60% of the calcium in citrate per gram but dissolves freely, so the same claim needs more powder and a different dosage form.

Elemental calcium per gram and per claim

Both salts are calcium sources, but the calcium is attached to a different anion and the anion is heavy. That is why the same label claim turns into very different powder weights. The table converts a claim into salt mass at the catalog calcium windows; it is arithmetic, not a recommendation.

Elemental calcium and the salt mass for a claim
SaltElemental calciumSalt for 100 mg CaSalt for 200 mg CaSalt for 500 mg Ca
Calcium L-threonate12.0–13.5%0.74–0.83 g1.48–1.67 g3.70–4.17 g
Calcium citrate tetrahydrate21.0–22.0%0.45–0.48 g0.91–0.95 g2.27–2.38 g
Calcium citrate, anhydrousAbout 24.1%0.41 g0.83 g2.07 g
Calcium carbonateAbout 40.0%0.25 g0.50 g1.25 g

For the same calcium, the threonate needs roughly 1.6–1.8 times the mass of the citrate tetrahydrate. At 100 mg that difference is small enough to hide in a tablet. At 500 mg it is the difference between a large sachet and a compact tablet, and that is before any excipient is added.

From the label claim to the weigh-up

The label declares calcium, not the salt. To size a batch, divide the calcium claim by the calcium figure on the certificate, not by the figure on the product page. A 200 mg claim against a lot at 12.0% needs 1.67 g of powder; the same claim against a lot at 13.5% needs 1.48 g. A 0.19 g swing on a 1.5 g serving is large enough to move the fill weight and the tablet size.

Use the calcium result that matches the basis. If the certificate reports calcium on the dried basis, multiply by one minus the loss on drying to get the as-received figure before sizing the scoop. A lot with 12.9% calcium on the dried basis and 5.0% water carries about 12.3% calcium as received. Sizing from the dried figure would overfill the serving.

At 200 mg calcium, 1.5 g of threonate is a large capsule or a single stick. At 500 mg, 3.7–4.2 g is a sachet, a divided serving or a different salt. The dosage form should be chosen with the mass in view, not after the label is designed.

Solubility: freely soluble against sparingly soluble

Calcium L-threonate is freely soluble in water, and the solution is neutral to slightly acidic. Calcium citrate tetrahydrate is sparingly soluble in water and dissolves in dilute acid. In a glass, the difference is visible: the threonate goes into solution at a normal serving, while the citrate can leave a suspension or a sediment unless the drink is acidic or the powder is kept suspended.

That makes the threonate the easier starting point for a clear drink, a stick or a ready-to-mix powder. It does not make the solution automatically stable. A near-neutral aqueous solution needs a preservative system or a validated thermal process, and the pH has to be checked against the other ingredients. Calcium can react with phosphate, carbonate or citrate in the matrix and form a less soluble salt, which may show up as haze after mixing rather than in the bulk powder.

The citrate has the advantage in the solid dose. It carries more calcium per gram, so a tablet or capsule can be smaller, and its acid solubility fits a stomach-acid story rather than a glass of water. For a swallowable tablet at a high calcium load, that mass advantage is usually the deciding factor.

What the label has to say

The ingredient list names the salt: “calcium L-threonate” or “calcium citrate”. A generic “calcium” does not identify the source that was bought, and the two salts are not interchangeable in the label arithmetic. The nutrition declaration states the calcium in mg and as a percentage of the reference intake, not the salt mass.

In the EU, the calcium reference intake is 800 mg, so a 200 mg serving declares 25% of the reference intake. In the US, the Daily Value is 1,300 mg and the Supplement Facts panel declares “Calcium (from calcium L-threonate)” at 15% of the Daily Value for the same 200 mg. The percentages are label arithmetic; they do not change with the salt, but the mass behind them does.

A label can legitimately declare 1.5 g of calcium L-threonate and 180–203 mg calcium. It cannot declare 1.5 g of calcium from 1.5 g of the salt. The salt mass and the calcium mass are different figures, and the certificate supplies both.

When to choose which

Choose calcium L-threonate when the dosage form is aqueous, when the calcium claim is in the 100–200 mg range, and when the label is built around the threonate salt. The freely soluble powder is the practical choice for a clear stick or a drink mix, and 1.5 g per serving is a workable sachet.

Choose calcium citrate tetrahydrate when the calcium claim is higher, when the tablet or capsule has a tight fill weight, or when the formula relies on acid solubility. It carries about 21–22% calcium, so 500 mg of calcium fits in about 2.3 g of salt rather than 3.7–4.2 g. The citrate is also the more established label ingredient for a compact solid dose.

Neither salt is a drop-in for the other. A switch changes the salt mass, the fill weight, the taste and the label name, and it needs a new specification, a new batch record and a label review. If the target is magnesium rather than calcium, the answer is neither of these: magnesium L-threonate is a different product with 7.2–8.3% magnesium and its own label.

What to check on the certificate

For either salt, read the salt name and CAS number, the calcium result and its basis, the assay, the loss on drying, the identity evidence and the particle size. For the threonate, add the question of how the L-configuration is controlled; for the citrate, confirm the hydrate, because the anhydrous salt carries more calcium than the tetrahydrate.

Do not compare two certificates on the calcium percentage alone. A 13.0% calcium threonate and a 21.5% calcium citrate are both on specification, and the number that matters for the label is the salt mass the serving needs. The calcium L-threonate product hub and the calcium citrate page carry the catalog figures; the COA page explains the certificate lines; the methods library describes the calcium titration; the quality page describes the release route.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation