What the COA for calcium L-threonate actually contains
A calcium L-threonate certificate reports appearance, identification by infrared spectrum and HPLC, the salt assay by HPLC at 98.0–102.0%, elemental calcium by complexometric titration at 12.0–13.5%, loss on drying at not more than 6.0%, particle size and the contaminant panels. The assay and the calcium are separate measurements, and the page is only readable when each one carries its method and its basis. These are the catalog limits; the batch COA confirms a particular pack.
The salt assay and the elemental calcium answer different questions, and the water figure is what keeps the two numbers consistent.
Reading the certificate line by line
Read the certificate as a laboratory report that should survive an audit, not as a marketing attachment. Every line needs the parameter, the technique that produced the number, the release limit and the measured result. A bare “conforms” hides the evidence and asks the reader to accept a conclusion on trust.
The identity lines decide whether the powder is the named salt. The assay line decides how much of the salt is present. The calcium line decides how much of the element the powder carries, which is the figure the finished label will use.
| Parameter | Method | Release limit |
|---|---|---|
| Appearance | Visual | White crystalline powder |
| Identification | Infrared spectrum and HPLC retention | Conforms to reference |
| Assay (calcium L-threonate) | HPLC | 98.0–102.0% |
| Calcium (Ca) | Complexometric titration | 12.0–13.5% |
| Loss on drying | Gravimetric | ≤6.0% |
| Particle size | Sieve analysis | ≥95% through 40 mesh |
| Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg |
| Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent |
The assay, the calcium and the water
The HPLC assay measures calcium L-threonate as a salt. The titration measures calcium as an element. They are not interchangeable, and a certificate that reports only one of them has left half of the specification untested.
The formula C8H14CaO10 has a molecular weight of about 310.27, of which calcium accounts for 40.08. The theoretical calcium content of the anhydrous salt is therefore 40.08 ÷ 310.27 = 12.92%. The catalog window of 12.0–13.5% sits around that figure. A lot at the top of the loss-on-drying limit carries water that dilutes the salt: at 6.0% water, a powder with a 100% assay would report about 12.1% calcium as received. That is why the water line belongs next to the calcium line, not in a footnote.
The certificate should state whether the assay and the calcium are calculated on the dried basis or on the powder as received. A 100% result on the dried basis is not 100% of the drum. If the basis is missing, the two percentages cannot be compared with the specification or with another supplier's certificate.
Identification is the third line. Infrared spectroscopy compares the threonate fingerprint with a reference; HPLC retention confirms the same peak in the chromatographic system. Neither test establishes the L-configuration on its own, so a label that names the L-isomer should be supported by a method that does.
Release limit and batch result
The release limit is the boundary for accepting the lot. The batch result is what the laboratory measured on that lot. Both belong on the page, in separate columns, with the method beside them. A result column that repeats the specification range has not measured anything; it has copied the acceptance criterion.
| Parameter | Release limit | Result column |
|---|---|---|
| Assay | 98.0–102.0% | A measured percentage, with the basis and the HPLC method |
| Calcium | 12.0–13.5% | A measured percentage, with the titration method and the basis |
| Loss on drying | ≤6.0% | A measured percentage and the drying condition |
| Heavy metals | Per element | A measured figure in mg/kg for each element |
| Microbiology | Counts and absence | The count and the absence statement for the lot |
“Passes specification” is a conclusion. The reader should be able to reach it from the numbers on the page. For microbiology the evidence is a count plus an absence statement; for heavy metals it is a figure per element, not a single total. A certificate that reports a sum of heavy metals has hidden the element that matters.
What moves between batches
Crystallisation and drying move the water figure and, with it, the calcium as received. The 40 mesh result can move with a new mill setting or a replacement sieve while the chemistry stays the same. The assay can move with the standard, the integration or the column, which is why the method belongs on the certificate.
Appearance is a white crystalline powder. Colour is a weak signal: a slight cream tint can come from a drying step, while a dark or uneven colour deserves an investigation. Rejecting a lot on colour alone is not a chemical decision.
A drift across lots is more informative than one result near an edge. Calcium falling while the assay holds points to water or to the counter-ion; assay falling while calcium holds points to the chromatographic method or to dilution. The lot code on the certificate should match the pouch, the drum and the retained sample.
When an independent test earns its place
Order an outside test for a new source, a first shipment into a regulated market, a disputed identity or a customer audit. The useful panel is not a full repeat of the supplier's certificate: it is the HPLC assay, the calcium titration, infrared identity, loss on drying, ICP-MS for the heavy metals and the microbiology set.
Add a magnesium screen when the consignment could have been confused with magnesium L-threonate; the two salts share the threonate anion but not the mineral. Add optical rotation or a chiral method when the L-configuration is part of the label claim. Ask the laboratory to report its detection limit for each screen, because a “not detected” entry without a detection limit says more about the method's sensitivity than about the powder.
Keep the chain of custody intact: the material that was tested should be the material that was retained, and the report should identify the lot. When the question is the identity of the salt, a referee test on the retained sample is more useful than a second run of the same assay.
What to compare between suppliers
Put six lines side by side: salt name and CAS number; assay result with method and basis; calcium result with basis; loss on drying and the hydrate state; identity evidence, including the L-configuration; and the contaminant and microbiology panel with the pack size and lot code.
Two quotations that agree on calcium but differ on the assay basis, the water figure or the identity method are not describing the same powder. The catalog limits are on the calcium L-threonate product page. The salt and hydrate options are compared on the grade page; the tests that separate threonate from other calcium salts are on the identity page; the titration is described in the methods library; and the release workflow is on the quality page.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation