Calcium gluconate: MOQ, packaging and ordering
Calcium gluconate is ordered in a 1 kg foil pouch or a 25 kg fiber drum. One pouch is the minimum, the standard lead time is 1–7 days, and the catalogue powder passes 40 mesh. A quotation becomes comparable only when the hydrate, the calcium figure, the destination and the documents are stated with the quantity.
The 1 kg pouch is the smallest unit that carries its own lot code; the 25 kg drum is the scale-up pack.
Why the order starts at one pouch
The pouch is the unit of traceability. It arrives with a lot code and a certificate, it can be sampled and tested, and the retained sample can be kept beside the trial batch. A formulator can qualify a source from one pouch without committing to a drum. That is the commercial logic: the smallest pack that still behaves like a lot.
Calcium gluconate is a high-fill material. A 500 mg calcium dose needs about 5.6 g, so 1 kg holds roughly 180 doses of calcium. That is enough for a bench trial or a small batch, not for a production run. The drum is the production unit, and it brings a longer storage period and a larger commitment. The minimum is set by the pack, not by a volume target.
Splitting a drum into smaller units is possible, but the split is a repack with its own handling record. The original lot identity is diluted, and the sub-pack needs its own label and traceability. A repack is a separate decision from the catalogue pack.
Pack options
| Pack | Net weight | Typical use | Notes |
|---|---|---|---|
| Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening |
| Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner |
| Granulated powder | On request | Flow and dust control | Different particle-size specification |
| Custom mesh | On request | Tablet or capsule feed | Qualify the new particle profile |
The standard powder is 40 mesh: at least 95% passes the sieve. A granule or a custom mesh is a new specification, not a different bag for the same material. Say so before the quotation if the press needs a coarser or freer-flowing feed, because the change moves the particle-size line and can move the lead time.
Dispatch and transit
Allow 1–7 days from order confirmation for the standard pack. That window covers picking, document preparation and dispatch. It does not cover freight transit, customs clearance or the buyer's own quality release. A custom granulation, a custom mesh or a non-standard pack adds time, and the quotation should show it as a separate line.
Ask for the dispatch date as well as the lead time. A drum may move on a pallet while a pouch moves as a parcel; the Incoterm decides who books the freight and who clears the entry. Send the documents with the lot rather than after it, so the importer is not holding material it cannot release.
Six details for a quotation
Six details make two quotations comparable:
- Material and hydrate. Calcium gluconate monohydrate, CAS 18016-24-5, with the water range.
- Specification. Assay basis, calcium figure, water, particle size, heavy metals and microbiology.
- Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated or custom-mesh variant.
- Destination and Incoterm. Country, port or address, and the trade term.
- Documents. COA, specification, SDS and any market-specific statement the importer needs.
- Use and market. Supplement, food or another use, and the country where it will be sold.
Without the hydrate and the market, the quotation is incomplete. The same powder can fit one destination and fall outside the file for another, and the paperwork is part of what is being offered. Commercial terms are stated on the quotation, not on this page.
Qualifying from a sample
Use the pouch as the qualification sample. Run identity, assay, calcium, water and microbiology before scaling, and keep a retained sample from that pouch. The lot code on the sample, the certificate and the quotation should agree. If they do not, the sample is a demonstration rather than a lot.
A smaller bench quantity can be discussed, but it is a split from a larger lot and should be documented as a repack. Do not assume that a bench sample and the production drum will share a lot number. If the project needs lot continuity, order the pouch and keep the balance sealed.
Terms worth settling early
The quotation covers the commercial terms, the Incoterm, the pack, the lead time and the documents. The quality terms sit beside it: the specification revision, the certificate per lot, the retained sample, the retest period and the change-control route. A quality agreement signed before the first production order is easier than one negotiated after a dispute.
Returns and replacements follow the quotation and that agreement. A lot that fails the agreed specification should be resolved through the retained sample and a joint re-test, not through a photograph. Agree in advance who pays for the referee test and which laboratory both sides accept.
The product hub carries the catalogue specification; the COA page lists the release tests; the compliance page covers the market files; the MOQ glossary entry defines the term; the logistics page covers shipping and documents.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation