What the COA for flaxseed oil actually contains
A certificate for a flaxseed oil lot reports appearance, identification by gas chromatography of the fatty acid methyl esters, the alpha-linolenic acid (ALA) figure with linoleic and oleic beside it, free fatty acid, peroxide value, moisture, the heavy-metal panel and microbiology. Every line needs a method, a release limit and the measured result in its own column. The limits on this page are the catalog specification; the lot certificate is the record of the oil inside a particular bottle or drum.
A flaxseed oil certificate is read from the fatty-acid profile and the oxidation pair together: ALA by GC, free fatty acid and peroxide value on the same lot, each with its method and its basis.
The certificate as a lot report
The catalog range for ALA is wide, so two conforming lots can sit twenty points apart. The certificate has to show where this lot falls, which acids accompany the ALA and what the oxidation values were at release. A row that says only “conforms” asks for trust without evidence.
Identity and concentration are separate rows. Identity asks whether the whole fatty-acid profile is consistent with cold-pressed Linum usitatissimum seed oil. The ALA figure asks how much of that one acid is present.
| Parameter | Method | Release limit |
|---|---|---|
| Appearance | Visual | Clear to slightly hazy oil, light yellow to golden |
| Identification | GC of fatty acid methyl esters against a reference profile | Profile conforms |
| Alpha-linolenic acid (C18:3 n-3) | GC-FAME | 45.0–65.0% |
| Linoleic acid (C18:2 n-6) | GC-FAME | 12.0–20.0% |
| Oleic acid (C18:1 n-9) | GC-FAME | 12.0–20.0% |
| Free fatty acid (as oleic) | Titration | ≤0.50% |
| Peroxide value | Iodometric titration | ≤5.0 meq O₂/kg |
| Moisture | Karl Fischer | ≤0.1% |
A certificate that prints ALA but omits linoleic and oleic leaves the identity question open, because a blend can be built to hit one acid figure while the rest of the profile drifts.
The GC basis: area per cent, weight per cent and the oil basis
Fatty-acid results come from transesterification to methyl esters and capillary gas chromatography with flame-ionisation detection. Percentages are reported as area per cent or as weight per cent after response-factor correction, and the two differ. The certificate should state the basis, the column and the standard, and carry the chromatogram when identity is contested.
The C18:3 position is where resolution matters. Alpha-linolenic acid (C18:3 n-3) and gamma-linolenic acid (C18:3 n-6) share a carbon count and can co-elute on a short or weakly polar column, so a method that does not separate them can report a combined peak. The method note should show both peaks resolved. The chromatogram also shows any trans C18:3 created during refining, which is not the ALA the label declares.
The oil basis is a second conversion. A figure of 55.0% on the oil means 550 mg of ALA per gram, before any carrier. On a microencapsulated powder the number is the oil figure times the oil load, and the certificate has to say which basis it reports; the conversion is worked through on the flaxseed oil powder page and in the grade comparison.
Release limit versus batch result
The release limit is the gate; the batch result is what the laboratory measured. Both belong on the page, in separate columns, with the method beside them. A result column filled with the range is a copy of the gate, not a result.
Free fatty acid and peroxide value measure different failure routes. Free fatty acid reflects hydrolysis, which needs water; peroxide value reflects the first stage of oxidation, which needs oxygen and is accelerated by light and heat. A lot can sit inside both limits at release and still arrive with a painty odour if the pack was warm and half empty.
| Parameter | Release limit | Result column |
|---|---|---|
| Free fatty acid | ≤0.50% as oleic | A measured percentage, with the titration method |
| Peroxide value | ≤5.0 meq O₂/kg | A measured figure in the stated units |
| p-Anisidine value | Not fixed in the catalog; agree at order | A measured figure for the agreed limit |
| Moisture | ≤0.1% | A measured percentage by Karl Fischer |
| Heavy metals | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | A figure per element, not a single total |
| Microbiology | Counts and absence tests | The count and the absence statement for the lot |
The anisidine value measures the secondary aldehydes that appear as an oil ages, and it moves after the peroxide value has peaked and fallen. An oil can pass the peroxide gate while the anisidine figure shows it is stale. The catalog does not set that limit for the oil, so if the customer needs it, it belongs in the specification for every lot.
What moves between lots
The seed lot, the growing season and the pressing temperature move ALA inside the catalog window. Refining moves free fatty acid, colour and peroxide value much more than it moves the profile, so a refined oil can report the same ALA as a cold-pressed oil and behave differently in a softgel.
Peroxide value is the most variable line: it depends on the seed condition, the press temperature, the headspace and the time since production. A result close to 5.0 leaves little room for a warm warehouse. Colour is the least quantitative line, and a darker shade prompts a storage question rather than an identity failure.
A trend across lots says more than one result near an edge: ALA drifting low, peroxide climbing, or free fatty acid rising in a grade that should be low. The lot code should tie the certificate to the bottle, the drum and the retained sample; without that link the trend may describe another material.
When to order an outside test
Order an independent test for a new source, a first shipment into a regulated market, a disputed ALA figure, a suspected blend or an oil that smells stale on arrival. The panel is narrow: GC-FAME with the full profile and chromatogram, peroxide and anisidine values, free fatty acid, sterols and tocopherols if the source is disputed, heavy metals and microbiology.
Ask the laboratory to report its limit of quantification for each screen, and choose one working to ISO/IEC 17025. A “not detected” line without a limit describes the method, not the oil. Chain of custody matters: the sample tested should be the sample retained, and the report should name the lot and the pack.
What to compare between suppliers
Put six lines side by side: species and process; ALA with its basis; the full fatty-acid profile; free fatty acid, peroxide and anisidine values; the heavy-metal and microbiology results; and pack size with lot traceability. Two certificates that agree on ALA but disagree on linoleic or oleic are not describing the same oil.
The catalog specification sits on the flaxseed oil product page. The tests that separate flaxseed oil from the oils that can copy its profile are on the identity page; the process grades are on the grades page; the methods are indexed under analytical methods; and lot release is described on the quality page.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation