02.1 Oil vs powder

Fish oil vs fish oil powder: the carrier, the dose and the label

Technical document 02.1 · Reviewed 2026-11-20 · Fish Oil

On this page
  1. The two products side by side
  2. The carrier is the difference the label must show
  3. The dose arithmetic
  4. What the label has to say
  5. Oxidation in the two formats
  6. When to choose which

Fish oil and fish oil powder are not two grades of one ingredient. The oil is a liquid triglyceride; the powder is that oil emulsified and dried onto a carrier, usually modified starch, with an antioxidant. On the 18/12 designation, a gram of oil carries about 300 mg EPA+DHA; a gram of a 10% powder carries about 100 mg. The choice changes the carrier, the mass per serving and the ingredient list.

In one line

The oil and the powder deliver the same omega-3 only after the carrier is counted: a gram of oil at 18/12 carries about 300 mg EPA+DHA, while a 10% powder carries 100 mg.

The two products side by side

Refined fish oil and microencapsulated fish oil powder
PropertyRefined fish oilFish oil powder 10%
FormLiquid oilFree-flowing powder
EPA+DHA per gramAbout 300 mg at 18/12About 100 mg
CarrierNoneModified starch and antioxidant
AppearanceClear to slightly hazy oilWhite to light yellow powder
Typical useSoftgels and oil blendsCapsules, tablets, sticks and drinks
Fish allergenPresent from the oilPresent from the oil, not the carrier

The powder is a different product, not a bench dilution. It has its own specification, its own certificate and its own catalog page. The oil's catalog is on the fish oil product page; the powder's is on the fish oil powder product page.

The carrier is the difference the label must show

A 10% powder built on a 30% oil needs roughly one third oil and two thirds carrier, moisture and antioxidant; a concentrate needs less oil and more carrier to reach the same 10%. The oil load belongs on the technical data sheet, not inferred from the assay. The carrier is usually a modified starch, and the antioxidant is named because both are ingredients in the finished label.

The carrier changes the physics: flow, density, dispersibility and surface oil. Surface oil is the fraction exposed to oxygen, so the wall protects the bulk of the oil but not the droplet surface. A powder can pass a 10% assay and still fail on oxidation or on flow. Those are process and specification questions, not marketing ones.

The carrier also changes the mass. Three grams of a 10% powder carry the same EPA+DHA as one gram of 18/12 oil, so a capsule or a stick built on the powder is larger for the same dose. That is the trade for flow and for a dry blend.

The dose arithmetic

To deliver 300 mg EPA+DHA, a formula needs about 1.0 g of 18/12 oil, about 3.0 g of a 10% powder, or about 0.6 g of a 50% concentrate. The powder therefore takes three times the mass of the oil for the same omega-3, which decides capsule size, stick weight and the number of servings per pack.

Mass needed to deliver 300 mg EPA+DHA
IngredientEPA+DHA per gramMass needed
Refined oil 18/12About 300 mgAbout 1.0 g
Concentrated oil 50%About 500 mgAbout 0.6 g
Fish oil powder 10%About 100 mgAbout 3.0 g

These are arithmetic examples, not recommendations. The label dose is the brand's decision; the oil or powder figure is the input. A 500 mg capsule holds about 150 mg EPA+DHA from 18/12 oil, but only about 50 mg from a 10% powder, before any overage.

What the label has to say

The ingredient list names what is sold. The oil is declared as fish oil; the powder is declared as fish oil powder, with the carrier and antioxidant in the ingredient list. The nutrition or Supplement Facts panel quantifies EPA+DHA per serving, not the powder weight. A label that declares 3 g of powder and 300 mg EPA+DHA is consistent; one that declares 300 mg EPA+DHA and 1 g of powder is not, unless the powder is 30%.

Fish is a major allergen in both formats. In the EU, Annex II of Regulation (EU) No 1169/2011 covers fish and products, with no refined-oil exemption; the powder's carrier does not change the source. In the US, fish is a major food allergen under FALCPA, and the highly refined oil exclusion is not automatic. The allergen statement belongs on the specification for both products, and the species belongs in the supplier file even when the label omits it.

The form is a label fact as well. “Fish oil” does not say triglyceride or ethyl ester, and the two are different ingredients. If the powder is built on an ethyl ester concentrate, the specification should say so, because the label and the identity test follow the oil, not the carrier.

Oxidation in the two formats

Both formats oxidise, but the failure mode differs. The oil has a small surface and a large headspace; the powder has a large surface and a protective wall. The powder's moisture limit is ≤5.0% against ≤0.1% for the oil, so the powder carries more water and more matrix. PV and p-AV are measured on the oil or on the powder, and the basis must be stated; a powder result cannot be compared with an oil result without the oil load.

Neither format is automatically more stable. The powder's wall slows oxygen ingress, but the surface oil is exposed; the oil's pack can be nitrogen-blanked, but the headspace is a reservoir. The pack, the storage condition and the test panel decide the shelf life, and the data belongs to the exact pack. The oil protocol is on the fish oil stability page, and the powder protocol on the powder stability page.

When to choose which

Choose the oil for softgels, oil blends and any formula where mass per serving and a short ingredient list matter. Choose the powder for sticks, tablets, drink mixes and capsules where flow and a dry blend matter more than mass. The powder is not a drop-in at the same weight: the dose arithmetic, the carrier declaration and the oxidation basis all change.

Both carry the fish allergen, and neither format is a way to avoid it. The oil's identity is proved by its fatty-acid profile and form; the powder's identity adds the carrier and the oil load. The release tests are on the COA page, the market rules on the compliance page, the analytical methods under methods, and the release workflow on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation