03 Stability

Fish oil oxidises; the pack and the headspace decide the shelf life

Technical document 03 · Reviewed 2026-11-20 · Fish Oil

On this page
  1. The bulk oil: moisture, headspace and the seal
  2. Oil in a liquid matrix: the interface
  3. What drives the reaction
  4. A stability protocol for the oil
  5. How the finished formula changes it
  6. Setting the retest period

Fish oil does not spoil like a wet ingredient; it oxidises. Oxygen attacks the double bonds, hydroperoxides appear first and aldehydes follow, while heat, light and trace metals speed the sequence. Shelf life is a property of the pack and the storage condition, not of the oil alone.

In one line

Fish oil fails by oxidation, not by spoilage: oxygen, light and heat raise the peroxide and anisidine values, and the pack is the only barrier between them and the oil.

The bulk oil: moisture, headspace and the seal

The bulk oil has a moisture limit of ≤0.1%, so water is a minor component. It is still relevant: hydrolysis raises free fatty acid, and water droplets can seed oxidation. The larger risk is the air above the oil. Every opening of a bottle replaces part of the headspace, and a half-used drum holds a large oxygen reservoir. Keep caps tight, transfer a part-used drum into a smaller closed container, and specify a nitrogen blanket if the buyer wants one; it is not implied by the standard pack.

Amber glass and opaque HDPE block light, but a clear transfer line or an open lid defeats the barrier. Store the oil in the dark. Copper and iron catalyse the reaction at low levels, so pumps, lines and fittings should be stainless steel or glass. A warm loading bay is an exposure even when the warehouse is cool.

Oil in a liquid matrix: the interface

Fish oil does not dissolve in water. A drink or a liquid supplement is an emulsion, and the oil-water boundary is where oxygen meets the oil. Smaller droplets mean more boundary; emulsifier, homogenisation, pH and heat all change the rate. A bulk oil test cannot predict the emulsion.

In a softgel the fill is enclosed, not dissolved. The shell's oxygen and moisture permeability and the quality of the seam decide the protection, and a clear shell on a lit shelf is still an exposure.

For a liquid, test the finished emulsion: PV and p-AV at fill and through storage. A nitrogen flush, low dissolved oxygen and an opaque pack help; an antioxidant slows the chain but does not undo existing damage.

What drives the reaction

Factors that move refined fish oil during storage
FactorWhat it doesControl
OxygenAdds hydroperoxides; aldehydes followSmall headspace, nitrogen, sealed pack
LightStarts photochemical oxidation; colour fadesAmber bottle, opaque drum, dark store
HeatSpeeds every step of the chainCool store and low process temperature
Copper and ironBreak down hydroperoxidesStainless steel and glass; avoid contact
WaterHydrolysis; free fatty acid risesDry oil, sealed pack, low humidity
AntioxidantDelays the chain; does not reverse itDeclare the type and the level

The factors interact. A warm, bright store with a half-empty bottle is worse than three separate effects, and a softgel on a sunlit shelf combines light and heat in one pack. The useful question is which pack, at which condition, for how long.

A stability protocol for the oil

A storage study should name the pack, the condition, the time points and the tests. Typical conditions are 25 °C/60% relative humidity for long term, 30 °C/65% for intermediate and 40 °C/75% for accelerated, with a light-exposure arm added. For bulk oil, a 60 °C oven test ranks formulations but does not substitute for ambient data.

At each point measure PV, p-AV, TOTOX, free fatty acid, moisture, appearance and odour. Run EPA and DHA at the start and the end to confirm the profile. Report the numbers rather than a pass tick, and identify the pack and the lot family. Data from a 1 kg bottle does not cover a 25 kg drum, because headspace and opening history differ.

Rancimat gives an induction time under heated air. Use it to screen antioxidants or lots, then confirm the result in the pack.

How the finished formula changes it

A softgel, an emulsion and a powder expose the oil differently. The softgel shell is a barrier, but the seam is a weak point. An emulsion adds an interface and often a heat step. A powder coats the oil in a starch wall; the surface oil remains exposed, and the powder's moisture limit is 5.0% rather than 0.1%.

A blend with vegetable oil lowers EPA+DHA per gram and changes the sterol profile. An antioxidant or an overage cannot restore an oil that has already oxidised; the aldehydes remain, and the odour returns.

Setting the retest period

There is no single shelf-life figure for fish oil. The retest period is assigned to a pack and a storage condition, and it rests on the stability file for that pack. Without the pack, the condition and the test panel, a number is only a claim.

At the end of the retest period, re-test the retained sample before extending use. Do not assume an extension, and do not apply a bulk result to a repacked bottle or a softgel. The finished product needs its own study, in its own matrix.

The standard packs are listed on the MOQ page; the release tests are on the COA page; the identity tests are on the identity page; the powder format is covered on the fish oil powder stability page; the oxidation methods are indexed under methods; the release workflow is on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation