01 COA & batch testing

What the COA for evening primrose oil actually contains

Technical document 01 · Reviewed 2026-11-20 · Evening Primrose Oil

On this page
  1. The certificate as a lot report
  2. The GC basis: profile, GLA and the oil basis
  3. Release limit, result and the oxidation pair
  4. What moves between lots
  5. When to order an outside test
  6. What to compare between suppliers

The certificate for an evening primrose oil lot reports the fatty-acid profile by gas chromatography, the GLA, linoleic and oleic figures, free fatty acid, peroxide value, moisture and the heavy-metal and microbiology panels. Every line needs its method and its release limit, with the measured result in a separate column. The catalog ranges are the gate; the lot certificate shows where inside them the oil actually sits.

In one line

A GLA figure alone does not describe the oil: the certificate has to place it inside the full fatty-acid profile and beside the free fatty acid and peroxide values for the same lot.

The certificate as a lot report

Evening primrose oil is a crop product, and the 8.0–11.0% GLA window is wide enough for two conforming lots to sit three percentage points apart. The certificate should report the whole profile, not only the headline acid, and tie the numbers to one lot code.

Identity and the GLA figure answer different questions. Identity asks whether the fatty-acid pattern is consistent with Oenothera biennis seed oil; the GLA figure asks how much of one acid is present. A certificate that reports only GLA leaves the identity question open, because another GLA oil or a blend can be built to land inside the same range.

Identity and fatty-acid profile · evening primrose oil
ParameterMethodRelease limit
AppearanceVisualClear to slightly hazy, pale yellow to golden
IdentificationGC of fatty-acid methyl esters against a reference profileProfile conforms
Gamma-linolenic acid (C18:3 n-6)GC-FAME8.0–11.0%
Linoleic acid (C18:2 n-6)GC-FAME65.0–75.0%
Oleic acid (C18:1 n-9)GC-FAME8.0–15.0%

The profile is the part a buyer can use. A blend can be pushed to the GLA figure while the linoleic and oleic fractions drift; matching two acids at once is harder than matching one.

The GC basis: profile, GLA and the oil basis

Fatty-acid results come from transesterification to methyl esters and capillary gas chromatography with flame-ionisation detection. The certificate should say whether the percentages are area per cent or weight per cent after response-factor correction, which column was used and which standard identified the peaks. The two bases diverge as the minor-peak load grows.

The C18:3 position needs care. Gamma-linolenic acid (C18:3 n-6) and alpha-linolenic acid (C18:3 n-3) differ only in the position of one double bond, so a short or non-polar column can merge them into one peak. If the method cannot resolve the pair, the reported C18:3 figure may include alpha-linolenic acid and the GLA result will read high. Ask for the chromatogram, not just the integrated percentage.

The oil basis is the second conversion. The catalog figure is 8.0–11.0% GLA on the oil itself. If the oil is later carried on a starch matrix, the figure on the powder is the oil figure multiplied by the oil load, and the certificate has to say which basis it reports. The evening primrose oil powder page sets out that arithmetic for the powder format.

Release limit, result and the oxidation pair

Free fatty acid and peroxide value are the lines most likely to move after release. Free fatty acid measures hydrolysis of the triglycerides, which rises with water and heat; peroxide value measures the primary products of oxidation, which rise early and can fall again as those products break down. The catalog sets free fatty acid at ≤0.50% and peroxide value at ≤5.0 meq O₂/kg. p-Anisidine value measures the secondary aldehydes that appear later; the catalog does not fix one for the oil, so agree it at order if the customer's shelf life is long.

Oxidation, contaminants and release tests · evening primrose oil
ParameterMethodRelease limit
Free fatty acid (as oleic)Titration≤0.50%
Peroxide valueIodometric titration≤5.0 meq O₂/kg
p-Anisidine valueSpectrophotometricAgreed at order
MoistureKarl Fischer≤0.1%
MicrobiologyPlate count and absence testsAerobic plate count ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent
Heavy metalsICP-MSPb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg

The result column needs a measured figure for each line: a number per element for heavy metals, not a total, and a count plus an absence statement for microbiology. A lot released near 5.0 meq O₂/kg is inside the gate and still different from one released near 1.0 for a softgel that will sit warm for two years.

What moves between lots

The seed lot, the growing season and the pressing temperature move the GLA inside the catalog range. Refining moves free fatty acid and colour much more than the fatty-acid profile, so a cold-pressed oil can sit near 0.4% free fatty acid and a refined oil from the same seed near 0.05%, both reporting a GLA figure inside the same window. The certificate records the values; the grade explains why they differ.

Peroxide value varies most because it depends on seed condition, pressing temperature, pack headspace and time since production. A lot released near the limit leaves little room for a warm loading bay or a clear bottle on a lab bench. Colour tells the least. A fresh cold-pressed oil and a lightly refined one can both fall inside the pale yellow to golden window, so a darker sample should prompt a storage question instead of an automatic rejection.

A trend says more than one result near an edge: GLA drifting low, peroxide value climbing, or free fatty acid rising in a grade that should be stable. The lot code on the certificate should match the bottle, the drum and the retained sample, or the trend belongs to another material.

When to order an outside test

An independent test is worth ordering when the source is new, when the lot is the first into a regulated market, when the GLA figure is disputed, when a blend is suspected, or when the oil has been held past its retest date. The panel is targeted rather than a full repeat: GC-FAME with the chromatogram and the complete profile, free fatty acid, peroxide and p-anisidine values, a sterol profile where a blend is suspected, heavy metals and microbiology.

Request the quantification limit behind each screen, and use a laboratory whose ISO/IEC 17025 scope covers the tests. Keep the chain of custody intact: the referee should test the retained sample, the report should carry the lot code, and the supplier's certificate and specification should travel with the sample so the methods can be compared.

What to compare between suppliers

Six lines make two offers comparable: the species and pressing route; the GLA figure with its basis; the complete fatty-acid profile; free fatty acid, peroxide and p-anisidine values; the sterol statement where a blend is suspected; and the pack with its lot traceability. An offer that matches the GLA but not the linoleic or oleic figure describes a different oil.

The catalog limits are on the evening primrose oil product page. The test terms are defined in the COA glossary entry, the method library is indexed under analytical methods, the grade differences are on the grades page, the source evidence is on the identity page, and lot release is described on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation