01 COA & batch testing

What the COA for black seed oil actually contains

Technical document 01 · Reviewed 2026-11-19 · Black Seed Oil

On this page
  1. The certificate as a test report
  2. Fatty acid share, oil mass and the thymoquinone figure
  3. Release limit versus batch result
  4. What moves between batches
  5. When to order an outside test
  6. What to compare between suppliers

A certificate for cold-pressed black seed oil has to answer two questions that are easy to confuse: what the oil is and what condition it is in. The fatty acid profile by GC and the thymoquinone (TQ) figure by HPLC describe the material; free fatty acid, peroxide value and moisture describe how it has been handled. The limits below are the catalog specification, and each batch COA is the record of one lot against them.

In one line

The fatty acid profile says what the oil is; the thymoquinone figure, free fatty acid and peroxide value say whether it is the lot that was bought.

The certificate as a test report

A certificate is useful when a second laboratory can repeat every line: the parameter, the method, the limit and the basis. A row that says only “conforms” asks the reader to trust a conclusion without the evidence behind it. The table below is the release specification for the cold-pressed oil, not a batch result.

Release specification for cold-pressed black seed oil
ParameterMethodLimitBasis
AppearanceVisualDark amber to brownish; clear to slightly hazyOil as sold
Linoleic acid (C18:2)GC-FID of fatty-acid methyl esters50.0–60.0% of total fatty acidsOil as sold
Oleic acid (C18:1)GC-FID of fatty-acid methyl esters20.0–25.0% of total fatty acidsOil as sold
ThymoquinoneHPLC with UV detection0.5–2.0%Oil as sold
Free fatty acidTitration as oleic acid≤0.50%Oil as sold
Peroxide valueAOCS Cd 8b-90 or ISO 3960≤5.0 meq O₂/kgOil as sold
MoistureKarl Fischer≤0.1%Oil as sold
Heavy metalsICP-MSPb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kgOil as sold
MicrobiologyPlate count and absence testsAPC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absentOil as sold

Identification is the profile, not a single percentage. The full GC trace should match the reference oil, and the chromatogram, column, esterification route and standard belong with the result. Two C18 acids can merge on a poor separation, and the two headline figures can then agree while the trace does not.

Fatty acid share, oil mass and the thymoquinone figure

Fatty acid results are normalised to total fatty acids. A linoleic figure of 55% means 55% of the fatty acid fraction, not 55 g per 100 g of oil; the glycerol that carries the acids is not part of the percentage. The conversion to oil mass is close to 0.95 for a typical triglyceride, but the certificate and the label must use the same convention.

Thymoquinone is reported on the oil as sold, usually as a percentage or as mg/g. One percent is 10 mg/g. The figure depends on the HPLC standard, the extraction and the detection wavelength, so the method line matters as much as the number. A TQ result without a standard and a chromatogram is a claim, not a measurement.

Free fatty acid is titrated as oleic acid and reports the unesterified fraction. Peroxide value is per kilogram of oil and covers hydroperoxides. Moisture is Karl Fischer on the oil as sold. These are three different bases, and a certificate that mixes them creates errors that survive into the label.

Release limit versus batch result

The release limit is the boundary for the lot; the batch result is what the laboratory measured on that lot. They should never share a cell. If the result column repeats the range, the reader has learned the specification but nothing about the lot.

What the lot record should show for each test
TestRelease limitRecord for the lot
Linoleic and oleic acids50.0–60.0% and 20.0–25.0% of total fatty acidsMeasured values, basis and chromatogram
Thymoquinone0.5–2.0%Measured value, method, standard and chromatogram
Free fatty acid≤0.50%Measured value as oleic acid
Peroxide value≤5.0 meq O₂/kgMeasured value, method and test date
Moisture≤0.1%Measured value by Karl Fischer
Metals and microbiologyElement- and test-specificA result per element; counts and absence statements

Peroxide value is the line that needs a test date. Hydroperoxides break down into aldehydes as an oil ages, so PV can fall while the oil becomes more rancid; p-anisidine value (p-AV) shows the secondary products and is worth adding when oxidation is the question. FFA and PV close to their limits are not automatic rejects, but they leave less room for storage.

What moves between batches

Seed origin, season and pressing temperature move the profile and the TQ figure. A cold-pressed oil is unrefined, so FFA and colour pass into the bottle; filtration removes sediment but does not undo oxidation. A lot at one edge of the linoleic range is usually at the opposite edge of the oleic range, and that is normal crop variation.

TQ is the most variable line. It falls with heat, light and storage time, and it is lower in a refined oil because deodorisation removes it. A TQ figure near the bottom of the range can be a fresh oil from a low-TQ seed lot or an older oil that has lost TQ; the volatile profile and the storage history separate the two.

Colour is the weakest signal. Dark amber to brownish covers a wide window, and a duller tone can mean oxidation, a different press batch or a different seed. The lot code on the certificate, the bottle or drum and the retained sample should match.

When to order an outside test

Order an independent test for a new source, a first import, a claimed grade, a suspected blend or a disputed result. Target the gap rather than repeating the whole certificate: a full GC-FID run with the chromatogram for the profile, an HPLC run with the standard for TQ, sterol and tocopherol patterns for authenticity, FFA and PV with p-AV for condition, and metals, pesticides and PAH for the seed source.

Ask for the limit of quantification beside every “not detected”. Without it the line describes the method, not the sample. The sample tested should be the retained sample, and the report should name the lot.

What to compare between suppliers

Two certificates can quote the same linoleic acid and describe different oils. Compare the botanical name, the grade, the TQ figure with its method, the condition figures with their test date, the authenticity evidence and the lot trace. A refined oil with a lower TQ can pass the same linoleic range as a cold-pressed oil, and the two are not the same purchase.

The catalog specification is on the black seed oil product page; the grade choice is on the grades page; the authenticity tests are on the identity page. The methods index explains the GC and HPLC work, and the quality page covers lot release.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation