05 Compliance

The regulatory file for black seed oil

Technical document 05 · Reviewed 2026-11-19 · Black Seed Oil

On this page
  1. What the file contains
  2. European Union
  3. United States
  4. Contaminants and limits
  5. Label and claims
  6. Documents in the file
  7. Checklist before the first order

Black seed oil is a cold-pressed oil, and its regulatory file is built around the exact material, the destination and the finished-product route. The catalog specification and the batch COA describe the oil; the file adds the route, the contaminant calculation, the label review and the change-control record. The buyer's regulatory team confirms that route for the destination.

In one line

The specification describes the oil; the regulatory file shows the route, the limits and the label for the destination, and the buyer's team confirms that route.

What the file contains

A complete file answers four questions: what the material is and which specification version is being bought; which lot is released and what its certificate reports; which limits and label rules apply to the finished product; and what changes if the source, the process or the pack changes. The COA answers the lot, the technical data sheet answers the specification and the safety data sheet answers handling. None of them answers the route question on its own.

The file should also carry the allergen and GMO statements, the origin record, the pesticide and PAH statements for the seed source, and the packaging declaration. A document list with version numbers is more useful than a folder of undated PDFs.

European Union

The EU file starts with the general food law, Regulation (EC) No 178/2002, and the food information rules in Regulation (EU) No 1169/2011. Contaminants are checked against Commission Regulation (EU) 2023/915, and the novel-food question is checked under Regulation (EU) 2015/2283. The cold-pressed seed oil and a purified thymoquinone isolate are different materials for this purpose, and the buyer's team confirms which route each one takes. Check the current consolidated text: the rules can change, and this summary is as of this review.

Labelling names the oil and the botanical source in the form the destination requires. A claim is reviewed separately from the composition. The certificate does not approve a claim, and a TQ figure on the certificate is not a health claim.

United States

The US file is built around the exact dietary ingredient and its intended use. The supplier should be able to name the basis it relies on and point to the supporting document; the buyer confirms that the basis covers the finished product. For a supplement, the framework includes the Dietary Supplement Health and Education Act, the labelling rules in 21 CFR 101 and the current good manufacturing practice rules in 21 CFR 111. A new dietary ingredient needs its own notification under 21 CFR 190.6, and an isolate is a different ingredient from the oil. The claim review is separate from the certificate.

Contaminants and limits

The contaminant panel is a finished-product calculation, not only a drum result. The table below gives the catalog limits for the oil as released; the destination text and the daily dose decide the finished-product limit.

Catalog contaminant limits and what the file should show
ParameterCatalog limitWhat the file should show
Lead (Pb)≤3 mg/kgLot result, method and the finished-product calculation
Arsenic (As)≤2 mg/kgLot result and method
Cadmium (Cd)≤1 mg/kgLot result and any category exception that applies
Mercury (Hg)≤0.1 mg/kgLot result and method
PAH and mineral oil—Result for the marker set the market names, with the current destination limit

For an oil, the PAH question follows the drying step, and mineral-oil hydrocarbons follow the pressing, storage and packaging chain. The destination's current text sets the marker set and the limit; a result from a different marker set is not a substitute. Where a statement is not available for the lot, name the gap before the order.

Label and claims

No disease-related claim is made for this material on this page. The fatty acid percentages and the TQ figure are composition statements; they do not become a health claim because they appear on a certificate. Structure/function wording, if used, is reviewed for the destination and the finished product, and the reviewer signs it off before the label is printed.

Comparative or standardised wording needs care. A TQ figure above the natural range can mean the oil was enriched, and the label should not imply that the oil is naturally that high. “Cold-pressed” is a process description, and it should be supported by the press record, not only by the colour of the oil.

Documents in the file

  • Certificate of analysis for the lot, with methods and results.
  • Technical data sheet and the current specification version.
  • Safety data sheet for handling and transport.
  • Allergen and GMO statements; origin record.
  • Pesticide multi-residue, PAH, heavy-metal and microbiology results.
  • Packaging declaration and the change-control statement.

Each document should carry a version or a lot reference. A generic statement that is not tied to the lot is a policy, not evidence.

Checklist before the first order

  • Specification version, botanical name and grade are named.
  • COA, TDS, SDS, allergen, GMO and origin are on file.
  • Contaminants are converted to the finished-product dose.
  • The label and the claim are reviewed for the destination.
  • The source, process and pack are under change control.
  • The quotation, specification and certificate refer to the same version.

The product page carries the catalog specification; the COA page explains the lot certificate; the identity page covers the analytical evidence. The quality page describes the release file, and the EU regulatory note gives the framework reference.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation