02 Grade comparison

Hemicellulase grades: activity, side activities and form

Technical document 02 · Reviewed 2026-11-20 · Hemicellulase

On this page
  1. Why a purity figure does not exist for an enzyme
  2. The options on the table
  3. Powder flow and airborne dust
  4. Unit arithmetic and weighability
  5. Writing the grade into a specification

Hemicellulase is sold by declared activity, by the side-activity profile behind that number and by physical form, not by a purity percentage. The catalog grade is an 80 mesh powder at ≥50,000 U/g by the named assay; a granulated form is a separate specification, and a blend or a dilution is a different product. Because the name covers a class of enzymes, the grade is the composition, not the word.

In one line

The grade of a hemicellulase is its declared activity, its side-activity profile and its form, and the name alone fixes none of the three.

Why a purity figure does not exist for an enzyme

A mineral salt carries a purity figure because the assay weighs the molecule against the rest of the drum. An enzyme preparation cannot be described that way: the powder is enzyme, fermentation residue and carrier, and activity is a rate rather than a proportion. The useful description is a declared activity on a named substrate, the profile of side activities, the carrier and the particle form.

That is why two drums both labelled hemicellulase can behave differently. One may be xylanase-dominant and act quickly on wheat arabinoxylan; another may be mannanase-rich and work on a galactomannan stream. Both names are honest, and neither is the other's drop-in. The purchase order has not specified the material until the profile is attached.

What the grade controls in a formula
PropertyWhat it controlsWhere it shows up
Activity (U/g)How many units a gram deliversDose weight, label basis, overage
Substrate and unit definitionWhat the number countsComparability between suppliers
Source organismWhich enzyme mixture and which fileIdentity, stability, permitted use
Side-activity profileWhat else the preparation doesSubstrate fit, assay interference
CarrierWhat the activity sits onIngredient list, moisture, flow
Particle size and formHow the powder flows and dispersesBlend uniformity, dust, mixing time

The options on the table

The catalog form is a ≥50,000 U/g powder at 80 mesh. Granulation is available on request and is a separate specification, not a packing choice. Where a lower-activity dilution is agreed, it is a new specification with its own certificate; a blend with another enzyme is a different product again.

The options and what changes when you switch
OptionActivityPhysical formWhat changes in the formula
Standard powder≥50,000 U/g80 mesh powderSmallest dose weight; concentrate for blends
Granulated (on request)Agreed in the specificationGranulesLess dust; slower dispersion; measure granulation loss
Dilution (separate specification)Agreed in the specificationPowderLarger dose weight; carrier becomes an ingredient
Blend (different product)Each activity declaredPowder or granuleSeveral activities; assay, label and file all change

The activity figure is comparable only when the unit is. A U/g from one supplier and a unit named by another are not the same measurement unless the substrate, pH, temperature and calibrant match; the COA page sets out what belongs beside the number.

Powder flow and airborne dust

The catalog particle size is ≥95% through 80 mesh: a fine powder that blends into a dry mix and dissolves in water to a clear to slightly turbid solution. The same fine fraction that disperses quickly is the one that becomes airborne. Enzyme powders are respiratory sensitisers, so dust is a handling and documentation question — extraction at the source, closed transfer, a suitable mask and the hazard statements on the safety data sheet.

Granulation trades dust control against dispersion speed. A granule wets more slowly, which suits a plant handling kilos a day and can fail a drink mix that needs fast dispersion. The granulation step itself removes activity, so the after-step figure belongs in the specification.

The carrier is not inert. A dilution adds mass, may hold moisture and must be declared if it has a function in the finished product. Get the carrier identity and its ratio written into the specification.

Unit arithmetic and weighability

Multiplied by the weighed mass, activity per gram gives the units charged. A process that needs 1,500,000 U takes 30 g of a 50,000 U/g powder; at 100,000 U/g the same units weigh 15 g. Inside one unit definition the units are identical; the mass and the ingredient declaration are not.

Weighability usually settles the choice. A 30 g charge is routine in production and awkward in a small pilot, where the balance and the mixer struggle with a speck of powder. A dilution makes the units weighable and carries the carrier through the formula and into the declaration.

Two cautions sit beside the arithmetic. The label basis has to say whether activity is guaranteed at release or at the end of the retest period, because heat and moisture remove units between the two. And a diluted grade needs a certificate for the diluted lot, not for the concentrate it came from.

Writing the grade into a specification

The lines below turn a grade into something a laboratory can release against:

  • “Hemicellulase preparation, CAS 9025-56-3, with the production organism and strain stated.”
  • “Declared activity ≥50,000 U/g, with substrate, calibrant, pH, temperature and incubation time stated.”
  • “Activity basis: as received or dry solids; release or end of retest period.”
  • “Side activities — xylanase, mannanase, arabinase, cellulase — each with its own method and limit where agreed.”
  • “Carrier identity and ratio; loss on drying ≤8.0%; particle size ≥95% through 80 mesh.”
  • “Form: powder at 80 mesh, or granule; intended use and destination market confirmed.”

Write the activity as a one-sided limit (“not less than”) and keep the unit definition in a method appendix under change control. Move the substrate or the conditions and two results stop being comparable, however similar the U/g looks. The catalog values are on the hemicellulase product page; the checks that keep a diluted lot honest are on the identity page; the single-enzyme comparison is on the xylanase page; the method vocabulary is in the methods library; the release workflow is on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation