04 MOQ & ordering

L-Valine: MOQ, packaging and ordering

Technical document 04 · Reviewed 2026-11-19 · L-Valine

On this page
  1. Why the minimum is one kilogram
  2. The packs, and what each one protects
  3. Lead time
  4. What the quotation needs
  5. Samples
  6. Where the terms stop

L-valine starts at 1 kg, sealed in a foil pouch from a released lot with a batch COA; production runs move to the 25 kg fiber drum. The published lead time is 1–7 days once the specification and order are fixed. Form, mesh, pack and destination turn that baseline into a quotation.

In one line

One kilogram from a released lot is the qualification unit; the pack, the mesh and the destination market set the rest of the order.

Why the minimum is one kilogram

One kilogram is the smallest pack that remains tied to a lot number. It covers a bench trial, a repeat run after a formula change, and a retained sample for the project. A smaller amount is a hand sample: enough to look at, not enough to release a lot or compare two suppliers.

The minimum is a pack, not a bulk threshold. A buyer who needs 500 g is better served by a sample than by a split pouch, because a split loses the sealed seam and the lot label. A buyer who needs 30 kg takes a drum plus pouches; the drum has its own liner and freight profile.

L-valine is a single crystalline material, so the 1 kg unit does not change with the mesh. It changes with the pack: a milled or granulated lot still fills a 1 kg pouch, but the sample and the trial run should use the same mesh as production.

The packs, and what each one protects

Standard packs · L-valine crystalline powder
PackNet weightConstructionTypical useWatch
Foil pouch1 kgFoil laminate, heat-sealed seamsTrial batch, retained sample, small runA folded top is not a seal
Fiber drum25 kgFiber drum with a sealed inner linerFull-scale productionThe liner is the barrier, not the drum wall

The pack label should show the product, form, lot, net weight and pack date, and the lot string must match the certificate. A desiccant can supplement the liner in a humid climate, but it cannot repair a seam that was folded rather than sealed. Non-standard packs are quoted, not stocked.

L-valine is not classified as dangerous goods, so the pack is about protection, not transport class. The pouch is the unit a lab can open without touching a drum; the drum is the unit a production run draws from. Once a drum is opened, close the liner and write the date on the label.

Lead time

The clock starts when the specification and the order are fixed. An enquiry is not a confirmation, and a PO against a different specification resets the clock. The standard 40-mesh pack moves within the published 1–7 days; 80-mesh milling or granulation starts when the line schedules it, not when the email arrives.

Paperwork runs alongside production. A destination that asks for a certificate of origin, a local-format SDS or a third-party test will not ship on commercial documents alone, so agree the document list before the PO. A public holiday in the shipping week adds a week in practice.

State the required delivery date and the delivery term at enquiry, not after the PO. The lead time is a production and packing number; freight transit is separate.

What the quotation needs

A quotation is comparable only if it answers six questions. “L-valine 99%” plus a weight is not enough, because two suppliers can mean different forms, basis and packs.

  1. Identity and form: L-valine, CAS 72-18-4, the free amino acid or a named BCAA ratio.
  2. Specification: assay method and basis, rotation, loss on drying, residue, pH, mesh, contaminants and micro, plus the version that will be released against.
  3. Particle size and processing: 40 mesh standard, 80 mesh milled, granulated, or a blend.
  4. Quantity and pack: the number of 1 kg pouches, 25 kg drums or both, and whether a desiccant is required.
  5. Destination and delivery term: so freight, documents and transit are quoted on one basis.
  6. Documents and extra tests: COA, TDS, SDS, origin, allergen, GMO and animal-derived input statements, plus a third-party rotation or chiral check.

A quote that omits the basis or the mesh is a number for an unspecified powder. Ask for the specification version and the lot range behind the offer.

Samples

Ask for material from the lot that will be supplied, with the same lot number on the bag and the certificate. Confirm it was drawn before sealing, not scooped from an opened drum. Order enough for the trial and a retained portion; a second request adds time.

The sample is where the certificate stops and the powder starts: flow, dispersion, caking after a week on the bench, colour against the last lot. For L-valine, check the mesh in the intended process and run a blend uniformity trial if the material will be mixed.

Record the sample lot, the date and the storage conditions. A sample kept in a warm office is not representative of a drum in a cool warehouse.

Where the terms stop

Payment, delivery term, validity and the document list belong in the quotation. This page covers the minimum, the packs and the lead time; the commercial terms sit in the offer. The minimum is quoted per line, so a mixed order is broken into separate lines.

Three clauses are worth spelling out in the PO. The specification governs release, so a different mesh, water limit or form means a fresh specification and a fresh quotation. The certificate belongs to the lot, so the same lot code should appear on the certificate, the pack and the invoice. And the form has to be named: a PO for free L-valine should not accept a BCAA blend.

Add the shelf life remaining at shipment if the material will be held, and the non-conformance route if a result falls outside the specification. A change of source or manufacturing route is a change to the file, not a detail to discover at the next audit.

The release tests are on the COA page; the form and ratio choices are on the grade page; moisture behaviour is on the stability page; market requirements are on the compliance page. The product hub carries the catalog specification, MOQ and lead time are defined in the glossary, and the shipping terms sit on the logistics page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation