L-serine grades: the L form, the mesh and the file
L-serine is supplied in this catalog as the L enantiomer, 98.5–101.5% by HPLC, a white crystalline powder at 40 mesh, with granulation on request. The grade question is not a purity ladder: it is the form (L, D or DL), the mesh, the document set and the end use. A higher assay does not turn a D-serine lot into L-serine, and a granulated lot is a physical variant of the same molecule.
Grade in L-serine is a decision about the enantiomer, the mesh and the file, not about a higher assay number.
Why the form is the grade
“Food grade” and “supplement grade” are trade descriptions rather than a single legal status. The L form is the specification this page describes. D-serine and DL-serine are different substances with different CAS numbers, and a technical grade is made for industrial use; this catalog carries the food and supplement grade. A grade name on a quotation therefore describes a file and an end use, not a purity level.
A food lot and a technical lot can both run a tight assay. What an auditor looks for is whether the contaminant panel, the microbiology and the traceability record were generated for food use, and whether those documents travel with the lot in the drum. The label has to match the form: a panel that names L-serine describes the L amino acid, while a panel that names DL-serine describes the racemate.
The L form and the related forms side by side
| Form | Configuration | CAS | Assay / rotation | Use |
|---|---|---|---|---|
| L-serine, food and supplement grade | (2S) | 56-45-1 | 98.5–101.5% by HPLC; +14.0° to +16.0° | Capsules, tablets and powder blends |
| L-serine, granulated | (2S) | 56-45-1 | Same assay and rotation; granulation record | Flow and dust control |
| D-serine | (2R) | 312-84-5 | Separate specification; opposite rotation | Reference and non-L work |
| DL-serine | (2S) and (2R) | 302-84-1 | Racemic; rotation near zero | Reference; not a substitute |
Rows one and two are the same molecule under two physical specifications; rows three and four are different substances. A certificate that gives only “serine” has left the configuration open, so the buyer cannot tell which row applies.
Mesh, flow and the physical grade
The catalog form is crystalline, and at least 95% of it passes a 40 mesh sieve, whose openings are about 425 µm. Granulation clusters fine crystals into larger particles. It cuts dust, improves flow and can make a stick pack or a tablet press run more smoothly, but it may slow dissolution. Milling produces the opposite effect: finer particles dissolve faster and can be more cohesive, which can cause trouble in a low-dose capsule or a powder blend.
L-serine dissolves freely in water; a 1% solution has a pH of 5.0–7.0. The dissolution rate still depends on mesh, temperature and agitation, so the grade should be tested in the intended process rather than only in water. A granulated lot can cake in a humid store as readily as a fine one; granulation changes the flow, not the moisture sensitivity.
The mesh number is a release limit rather than a description of the powder. Two powders can clear the same sieve and still flow differently in a hopper, because their size distribution and particle shape are not the same. Ask for the distribution when flow or content uniformity is critical, and handle a mesh change as a specification change.
The label arithmetic and the assay basis
The assay is written on the dried basis, with loss on drying at ≤0.5%. Convert it to as-is before weighing. A 99.0% dried result with 0.3% loss on drying corresponds to 98.7% as-is; a 500 mg declaration therefore needs 506.6 mg of powder. This is arithmetic rather than a lot result, so use the lot's own figures.
The label decides the form. A label that names L-serine needs the L enantiomer. A DL lot is a mixture of both enantiomers, so it cannot be declared as L-serine; the D fraction is a different substance. A blend that contains serine and glycine declares each amino acid separately, because the two are separate ingredients with different weights and different assays.
The mesh also changes the fill. A 40 mesh powder and a granulated lot have different bulk density and flow, so the fill weight on a capsule line can shift even when the assay is identical. Recheck the fill and the content uniformity after a grade change, and keep the grade name on the specification rather than only in the purchase order.
What the specification should say
- “L-serine, CAS 56-45-1, C3H7NO3, (2S)-2-amino-3-hydroxypropanoic acid.”
- “Food and supplement grade. HPLC assay 98.5–101.5% (dried basis); LOD ≤0.5%.”
- “Specific rotation +14.0° to +16.0° on a dried basis; state the solvent, concentration and temperature.”
- “Infrared and HPLC for identification; the agreed D-serine limit reported.”
- “pH 5.0–7.0 in a 1% solution; at least 95% through 40 mesh, or a granulated grade to the agreed size range.”
- “Heavy metals and microbiology as listed; food-grade documents with each lot.”
DL-serine is the wrong choice when the label names L-serine. D-serine is not a grade of L-serine, and a technical grade is the wrong choice for a supplement even when the assay matches. Granulation is the wrong route when the process needs a fine powder for rapid dissolution or uniformity; the mesh is part of the specification, and a move between them needs change control, not a packing note.
The catalog specification is on the L-serine product page; the certificate lines are explained on the COA page; the one-hydroxymethyl difference from glycine is on L-serine vs glycine; the other hydroxyl amino acid is covered on the L-threonine page; the tests that separate the forms are on the identity page.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation