L-serine: MOQ, packaging and ordering
The smallest L-serine order is a 1 kg foil pouch; the bulk pack holds 25 kg in a fiber drum, and the standard lead time is 1–7 days. To turn an enquiry into a quotation that can be compared, the buyer needs to state the L form and CAS number, the assay basis, the quantity and pack, the destination and Incoterm, the documents required and the intended use.
A 1 kg pouch is the smallest unit we can trace as a lot: it covers a trial, a retained sample and an outside test, and it arrives with its own certificate.
Why 1 kg is the minimum
Three jobs fit inside a 1 kg pouch: a bench trial, material kept for reference and a separate identity test. It also travels by air without a pallet, which helps when material is needed before the production plan is signed off. The pouch is a lot with a code, not a scoop taken from a drum.
Below 1 kg the material is normally split out of a larger batch and repacked. The chemistry does not change, but the original pack identity is lost, handling increases and traceability becomes harder. At the other end, a 25 kg drum reduces handling per kilogram while tying up inventory for longer. The minimum is set by the pack, not by a volume target.
Packs and physical forms
| Pack | Contents | Where it fits | Handling note |
|---|---|---|---|
| Foil pouch | 1 kg | Bench trial, retained sample, short run | Water-vapour barrier; close it after use |
| Fiber drum | 25 kg | Full production | Liner stays closed; lot code on drum and liner |
| Granulated powder | 1 kg or 25 kg on request | Better flow, less dust | Size distribution changes |
The catalog powder passes 40 mesh at ≥95%. Granulation is a separate physical specification, not a packing decision. If the process needs better flow, raise it before the quote, because the particle-size line changes and the lead time may change with it.
Lead time and shipping
Standard packs are quoted at 1–7 days from confirmation. The window covers picking, paperwork and dispatch, not the sea or air transit, customs or the customer's own release. A granulated batch or a special pack takes longer, and that extra time should appear as a separate line in the quotation.
The dispatch date is more useful than the lead time. A drum usually moves on a pallet; a pouch can move as a parcel. The Incoterm sets who arranges freight and who handles customs clearance, and the documents should travel with the lot rather than after it.
What makes a quotation complete
Six details make a quotation comparable:
- Product and form. L-serine, CAS 56-45-1, with the L configuration and the grade written out.
- Specification. Assay method and basis, rotation, loss on drying, pH, mesh, metals and microbiology.
- Quantity and pack. Pouch, drum or granulated, with the net weight stated.
- Destination and Incoterm. Country, port or address, and trade term.
- Documents. COA, specification, SDS and any importer-specific statement.
- Intended use and market. Supplement, food or other use, and the country of sale.
A quotation that omits the market or the form is not complete. One powder can suit a destination and fall outside its file, and the paperwork is part of what is being bought. Commercial terms belong on the quotation, not on this page.
The sample has to be a lot
The 1 kg pouch is the qualification lot. Check identity, assay, rotation, loss on drying and microbiology before scaling up, and retain material from the same pouch. Sample, certificate and quotation should carry the same lot code. If the sample cannot be linked to a lot, it is a demonstration rather than a qualification.
For a smaller bench trial, ask before ordering. A split from a drum carries its own traceability and is not the catalog pouch, and the record should say so. A bench sample and a production drum are not necessarily from the same batch.
Terms to agree before ordering
The quotation covers the commercial terms, Incoterm, pack, lead time and documents. The quality terms sit next to them: specification revision, COA per lot, retained sample, retest period and change control. It is easier to agree a quality agreement before the first production order than to negotiate one after a dispute.
Replacement and return terms sit in the quotation and in that agreement. If a lot fails the specification, resolve it through the retained sample and a jointly agreed re-test, not a photograph of the powder. Agree in advance who pays for the referee laboratory and which laboratory both sides accept.
The catalog specification is on the product hub. Release tests are on the COA page; market files are on the compliance page; the MOQ glossary entry defines the term; release is described on the quality page.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation