04 MOQ & ordering

L-Proline: MOQ, packaging and ordering

Technical document 04 · Reviewed 2026-11-19 · L-Proline

On this page
  1. Why one kilogram is the minimum
  2. Pack sizes and formats
  3. Lead time and shipping
  4. What the quotation has to state
  5. The sample is a released lot
  6. Terms to settle before ordering

L-Proline is supplied from a 1 kg foil pouch, with a 25 kg fiber drum as the bulk pack; lead time is 1–7 days for the standard pack. A firm quotation has to name the enantiomer and CAS number, the assay basis and rotation, the quantity and pack, the destination and Incoterm, the documents, and the intended use and market.

In one line

One kilogram is the smallest order because the pack, the lot code and the rotation result have to belong to the same unit.

Why one kilogram is the minimum

One kilogram is enough to run a bench trial, hold back a retained sample and send a portion to an outside laboratory for polarimetry and a chiral check. It also travels as a parcel, which helps a formulator who needs material before the production plan is signed off. The pack carries its own lot code and certificate; it is not a scoop from a bulk drum.

An order below 1 kg means splitting a larger lot and repacking it. That adds handling, breaks the link to the original pack and makes traceability harder without changing the chemistry. A 25 kg drum lowers the handling per kilogram, but it ties up inventory and sits in storage longer. The minimum is set by the pack, not by a volume target.

The enantiomer question arrives before the pack question. One kilogram of the wrong proline is not a small trial; it is a label problem waiting for the first production run, so the order should say L-proline and CAS 147-85-3 first.

Pack sizes and formats

Standard L-proline packs
PackNet weightUseHandling note
Foil pouch1 kgTrial and small batchBarrier to moisture and light; close after use
Fiber drum25 kgProduction runsLined; lot code on drum and liner
Granulated powderOn requestFlow and dust controlNew particle profile
Custom meshOn requestTablet or capsule fillSeparate specification line

The catalog grade is a 40 mesh powder, ≥95% through 40 mesh. Granulating it or milling to another mesh creates a different specification line, not a different packing option. Tell us before the quotation if the press needs a coarser or freer-flowing powder; the change can move both the particle-size result and the lead time.

Lead time and shipping

The standard pack ships 1–7 days after order confirmation. That covers picking, paperwork and handover to the carrier; transit, customs and the buyer's own quality release sit outside it. A granulated grade, a custom mesh or a non-standard pack adds time, and the quotation should say so on its own line.

Ask for the dispatch date as well as the lead time. A drum usually moves on a pallet while a pouch moves as a parcel, and the Incoterm decides who books the freight and who clears the entry. The certificate and the other documents should be in the same shipment as the lot.

What the quotation has to state

A quotation can be compared only when it covers six points:

  1. Product and enantiomer. L-Proline, CAS 147-85-3, with the L form written out.
  2. Specification. Assay basis, specific rotation, loss on drying, mesh, heavy metals and microbiology.
  3. Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated or custom-mesh variant.
  4. Destination and Incoterm. The country, the port or address, and the trade term.
  5. Documents. COA, specification, safety data sheet and any market-specific statement the importer needs.
  6. Intended use and market. Whether the use is a supplement, a food or something else, and the country of sale.

An offer that leaves out the market or the enantiomer cannot be checked against the specification. The same powder can fit one destination and fall outside the file for another, so the paperwork belongs in the offer. Commercial terms appear on the quotation, not on this page.

The sample is a released lot

The kilogram you receive for qualification should be a released lot with its own certificate, not a hand-filled jar. Test identity, assay, rotation, loss on drying and microbiology before scaling, and keep a portion of the same pack as the retained sample. The lot code should run through the pack label, the certificate and the quotation.

A bench quantity below 1 kg can be discussed before the order, but it is a repack from a bulk lot and has its own traceability. The production drum may come from a different lot; plan the bridging test rather than assume the two are the same.

Put the rotation in the sample test even when the supplier's certificate reports it. A sample that passes the assay but sits near the edge of the rotation window is a question for the source, not a detail to settle at the first production run.

Terms to settle before ordering

The quotation covers the commercial terms, the Incoterm, the pack, the lead time and the documents. The quality terms sit beside them: which specification revision applies, a certificate per lot, the retained sample, the retest period and the route for a change. A quality agreement is easier to sign before the first production order than after the first disagreement.

Returns and replacements should follow the quotation and that agreement. If a lot fails the agreed specification, work from the retained sample and a joint re-test rather than a photograph of the powder. Agree in advance who pays for the referee analysis and which laboratory both sides accept.

The catalog specification is on the product page; the COA page lists the release tests; the compliance page covers the market files; the quality page describes the release workflow; the identity page explains the rotation check.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation