02 Grade comparison

L-proline, DL-proline and D-proline: choosing a grade

Technical document 02 · Reviewed 2026-11-19 · L-Proline

On this page
  1. Why proline comes in three forms
  2. The three forms side by side
  3. Solubility, mesh and handling
  4. What the enantiomer does to the dose and the label
  5. Specification lines for the contract

L-Proline is sold as the L enantiomer, as the racemate DL-proline and as D-proline, and each is a separate specification with its own CAS number and rotation. The catalog item here is L-proline, CAS 147-85-3: white crystalline powder, assay 98.5–101.5% by HPLC, specific rotation -84.0° to -86.5° on the dried basis. The assay on a quotation does not say which of the three is in the drum; the name and the rotation do.

In one line

L, DL and D proline are three purchase items rather than three grades of one item, and the rotation is the line that tells them apart.

Why proline comes in three forms

Proline has one chiral centre, at the carbon that carries the carboxyl group. The L form occurs in proteins, the D form is its mirror image, and the racemate contains equal amounts of both and is optically inactive. A fermentation or a protein-hydrolysis route gives the L form; a chemical synthesis that starts without a chiral pool gives the racemate, which then has to be resolved. The three materials share the same formula and the same molecular weight, so an assay that counts the amino acid cannot distinguish them.

The difference is commercial as well as chemical. A label names one ingredient, a specification controls one rotation window, and a formula was built on one enantiomer. An order that says “proline” without the enantiomer has not specified the material, and a certificate that reports only an assay has not shown which enantiomer was released.

The three forms side by side

L-proline, DL-proline and D-proline as purchase items
PropertyL-ProlineDL-ProlineD-Proline
CAS number147-85-3609-36-9344-25-2
FormulaC5H9NO2C5H9NO2C5H9NO2
Molecular weight115.13115.13115.13
Specific rotation-84.0° to -86.5°About 0° (racemate)About +84° to +86.5°
Occurs in proteinsYesNoOnly in specific peptides
Label nameL-ProlineDL-ProlineD-Proline
Catalog itemYesSeparate specificationSeparate specification

The table is a specification table, not a ranking. DL-Proline is a legitimate material for a synthesis bench or a research use; it is not a way to buy L-proline for a supplement, because half the mass is the other enantiomer and the label cannot call it L-proline.

Solubility, mesh and handling

All three are white crystalline solids, freely soluble in water, and the catalog sets loss on drying at ≤0.5% for the L form. The L form is stable as a dry solid and melts with decomposition above 200 °C; the racemate has its own crystal packing and melting behaviour, which is why an X-ray pattern is a solid-form check rather than a purity assay.

The catalog L grade is milled to 40 mesh, with at least 95% passing the sieve, white and free-flowing. Granulation is available on request and changes flow, dust and bulk density, not the chemistry. A finer or a coarser mesh is a separate specification line; agree it before the order rather than at the filling line.

Solubility is high. About 162 g of L-proline dissolves in 100 mL of water at 25 °C, so a 20% stock is practical and a concentrated amino-acid solution has room to work. A 1% solution sits at pH 5.0–7.0, close to neutral, which is one reason the material is easy to place in a blend. The solution is a nutrient medium, so the microbiology of a held stock is a separate question from the solubility.

What the enantiomer does to the dose and the label

The dosage form follows the enantiomer. A capsule that declares 500 mg of L-proline needs 500 mg of the L material; a racemate would need about 1,000 mg to carry the same amount of the L form, and the label would still have to name DL-proline. There is no fill-weight adjustment that converts one label ingredient into the other.

In a powder blend or a stick pack, the L form dissolves readily at the usual doses. In a tablet, the 40 mesh grade flows and compresses; a granulated grade may suit a high-speed press better. In a capsule, bulk density and mesh decide the fill weight, and the fill weight has to be set on the material the certificate names. Taste is a minor factor at a capsule dose and a larger one in a stick pack, so the final blend should be tasted rather than assumed neutral.

The rotation is not a dose parameter, but it is a release parameter. A source change should be accompanied by a rotation result before the first production run, because a lot that passes the assay and fails the rotation is not the material the label promises.

Specification lines for the contract

  • “L-Proline, CAS 147-85-3, formula C5H9NO2, molecular weight 115.13.”
  • “Assay 98.5–101.5% by HPLC; state the basis and the detection.”
  • “Specific rotation -84.0° to -86.5° on the dried basis; state solvent, concentration, path length and temperature.”
  • “Identification by IR and HPLC; attach the spectrum and the chromatogram.”
  • “Loss on drying ≤0.5%; pH 5.0–7.0 in 1% solution.”
  • “Particle size: at least 95% through 40 mesh, with the metals and microbiology panel written into the specification.”
  • “L enantiomer; a D-proline limit can be agreed by chiral HPLC.”

We supply the L form. DL-Proline and D-proline are separate purchases with their own certificates and label names; a switch to either needs a written change control and a fresh label review.

The catalog specification is on the L-proline product page. The hydroxylated analogue is compared on the L-proline versus L-hydroxyproline page; the certificate lines are explained on the COA page; the chromatographic methods are introduced in the methods library.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation