02 Grade comparison

L-phenylalanine grades: the enantiomer and the crystal

Technical document 02 · Reviewed 2026-11-19 · L-Phenylalanine

On this page
  1. Two decisions behind the word “grade”
  2. The L, DL and D grades side by side
  3. What 40 mesh, milled and granulated change
  4. Fitting the grade to the dosage form
  5. Writing the grade into the specification
  6. When a switch is the wrong move

L-Phenylalanine is supplied as the L enantiomer at 98.5–101.5% by HPLC on the dried basis, with a specific rotation of -33.0° to -35.5° and a 40 mesh crystalline powder as the standard form. The alternatives sold under the same family name are DL-phenylalanine, the D enantiomer and the methyl ester used in peptide chemistry, and each is a different specification. Within the L grade, the remaining choice is physical: 40 mesh, a finer milled powder, or granules.

In one line

Grade covers two decisions in this product — which enantiomer is in the drum and how the crystal is sized — and the assay percentage settles neither of them.

Two decisions behind the word “grade”

Buyers use “grade” for two unrelated questions: which molecule is in the drum — the L enantiomer, the racemic DL mixture or a derivative such as the methyl ester — and what crystal size and flow the filling line needs. A quotation that names only “phenylalanine 99%” has answered neither, and the two answers are not interchangeable.

For this product the molecule is fixed as L-phenylalanine, CAS 63-91-2, formula C9H11NO2, molecular weight 165.19. The side chain is a benzyl group, which makes the molecule aromatic, only slightly soluble in water and easy to detect in the ultraviolet. The assay is a poor guide to the chemical question, because a racemic lot and an L lot can both sit inside a 98.5–101.5% window: the method counts molecules and is blind to which hand they carry.

The L, DL and D grades side by side

The three phenylalanine grades and what each contains
SpecificationL-phenylalanineDL-phenylalanineD-phenylalanine
CAS number63-91-2150-30-1673-06-3
CompositionOne enantiomerNear-equal parts of bothOne enantiomer, the mirror image
Specific rotation-33.0° to -35.5° driedClose to zeroPositive, similar magnitude
Assay by HPLC98.5–101.5% driedRead the certificate; the same window is possibleRead the certificate
L form per gramAbout 1.00 gAbout 0.50 gNone
Label nameL-phenylalanineDL-phenylalanineD-phenylalanine
Usual supplySupplement and food useIndustrial routes, including resolutionResearch and peptide synthesis

Two rows carry the commercial consequences. The rotation is measured, so a buyer can check it on arrival with a polarimeter and a dissolved sample. The L content is arithmetic: a gram of the racemate delivers about half a gram of the L form, so a formula written for 500 mg of L-phenylalanine needs roughly twice the mass if DL is used. Compare grams of L delivered, not kilograms of powder.

Two further materials appear in the same catalogues and are not grades of this product: L-phenylalanine methyl ester hydrochloride, an intermediate in the manufacture of the sweetener aspartame, and feed-grade L-phenylalanine, which is sold against a feed specification and a feed documentation set.

What 40 mesh, milled and granulated change

The catalog form is a crystalline powder with at least 95% passing a 40 mesh sieve, about 420 µm. That is the size most capsule fillers and blender feeds are set up for. Milling to 80 mesh, about 177 µm, gives a finer powder that dissolves faster and distributes more evenly in a small blend; it also makes more dust, holds more static and separates more readily from a coarser excipient.

Granulation is the other direction: better flow, less dust, an even fill, and a slightly slower dissolve. Particle size changes the rate of dissolution, not the saturation point, because about 27 g dissolves per litre of water at 20 °C whatever the mesh. Bulk density and flow are not on the catalog specification; ask for both on the lot offered and run a fill trial. The terms are defined in the particle-size note.

Fitting the grade to the dosage form

A capsule takes the 40 mesh powder directly; a 500 mg dose plus excipients fits a size 0 or 00 capsule at a normal fill density, and the granulated form feeds more easily when the fill weight is at the top of the range. A tablet at the same dose needs a larger tool and a free-flowing feed, and the compaction trial shows whether a binder is needed.

A stick pack or drink mix is the harder case because the dose has to dissolve. At about 27 g per litre, 500 mg needs roughly 19 mL of water and 1 g needs about 37 mL at 20 °C, so a 200 mL stick is comfortable and a 30 mL shot leaves part of a gram undissolved.

Writing the grade into the specification

The specification should name L-phenylalanine and CAS 63-91-2, set the assay by HPLC on the dried basis at 98.5–101.5%, require the rotation with the solvent, concentration and temperature stated, cap loss on drying at 0.5%, and fix the particle size at 95% or more through 40 mesh, or the milled or granulated variant that was ordered.

Three lines are often left out and should not be. The rotation proves the L form. A related-substance limit with its method stops a reworked lot entering as new material. A residual-solvent statement is needed when the route is synthetic. If the file needs a number rather than a window, set a D-enantiomer limit by chiral HPLC.

The certificate for a lot is described on the COA page, and the tests that separate the forms are on the identity page.

When a switch is the wrong move

Do not switch L for DL to close a gap in the formula: the label has to name the form in the drum, the market file has to match the label, and the racemate delivers about half the L form per gram. Do not accept a feed-grade or methyl-ester lot as “the same phenylalanine” either, and do not accept a certificate without a rotation.

The head-to-head comparison is on the L versus DL page; the aromatic pair with L-tyrosine is described on its own page; the rules that follow the name are on the compliance page; the catalog specification is on the product page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation