04 MOQ & ordering

L-Leucine: MOQ, packaging and ordering

Technical document 04 · Reviewed 2026-11-19 · L-Leucine

On this page
  1. Why the minimum is 1 kg
  2. Packs and what each one is for
  3. Lead time and what starts the clock
  4. What a quotation needs to contain
  5. Samples and lot identity
  6. Terms worth agreeing before the first drum

The minimum order for L-leucine is 1 kg, packed in a foil pouch that carries a lot number and a certificate. The 25 kg fiber drum is the production unit, and standard 40 mesh material ships in 1–7 days; a milled or granulated grade is scheduled rather than pulled from stock. A quote is built from six details, and the specification is the one that decides whether two quotations describe the same powder.

In one line

The 1 kg foil pouch is the smallest pack that can carry its own lot code and certificate, which is why the minimum order is set there.

Why the minimum is 1 kg

A minimum order is usually a packing decision before it is a commercial one. Below 1 kg, the material has to be repacked from a production lot into a container that no longer carries the original lot code, or it is drawn from a sample shelf with no release history. Either route breaks the chain between the certificate, the drum and the powder in the buyer's hands.

The 1 kg pouch keeps that chain intact. It is filled from a released lot, labelled with the lot code, and shipped with the certificate for that lot. It is large enough for a formulation trial, a filler run and a retention sample, and small enough that a first order does not commit the buyer to a drum. A 1 kg order is a real order, not a spoonful taken from a drum.

The 25 kg fiber drum is the unit for production. It carries the same lot code and the same certificate, and it is the pack that a repeated order will use. The move from pouch to drum is a scale decision, not a specification change; the material inside should be the same grade.

Packs and what each one is for

Standard packs for L-leucine
PackNet contentTypical useHandling note
Aluminium foil pouch1 kgTrial, sample, small batchReseal after weighing; keep dry
Fiber drum with liner25 kgProductionKeep the liner intact; close the lid between uses

The pouch is the moisture barrier that the stability of the powder depends on. A foil pouch that is torn or left open is no longer the pack that was tested. The drum adds mechanical protection and a liner, but it is not a guarantee against a humid room if the lid is left off.

The label on each pack should show the product, lot code, net content, storage instruction and expiry or retest date. If the label on the pouch and the label on the drum disagree, the lot is not traceable and the shipment should be queried before it is opened.

Lead time and what starts the clock

Standard 40 mesh L-leucine ships in 1–7 days. The clock starts when the purchase order and the specification agree, not when the enquiry arrives: if the assay basis, the mesh or the documentation is still under discussion, the dispatch date is still moving. A milled 80 mesh or a granulated grade is a production step and is scheduled; it does not come off the same shelf as the standard powder.

Dispatch time is not transit time. The 1–7 day window covers picking, packing and documents; the forwarder's schedule is separate. For a first shipment into a regulated market, add time for the importer's document check and any sample release the buyer wants to run before the drum is accepted.

The documents that travel with the lot — certificate, specification, safety data sheet and the statements the buyer needs — should be confirmed at the quotation stage, not requested after the container is booked.

What a quotation needs to contain

Six details that make an L-leucine quote comparable
DetailWhy it changes the offer
Form and gradeFree L-leucine, 40 mesh, 80 mesh or granulated; a blend is a different product
Quantity and pack1 kg pouch or 25 kg drum, and the number of each
Specification and methodsAssay basis, rotation, loss on drying, pH, mesh, metals and micro
Destination and IncotermsDocuments, label language and the delivery point follow from these
DocumentationCOA, SDS, specification, allergen and origin statements
Required date and sampleWhether the buyer needs a sample lot before the production lot

Two quotes that agree on the quantity but differ on the assay basis, the rotation or the mesh are not comparable. The lowest line on a spreadsheet is often the one with the fewest specification lines, and the missing lines are the ones that decide whether the powder fills the capsule at the expected weight.

Samples and lot identity

A sample should be drawn from the lot that is being offered, not from a demonstration stock, and it should carry the same lot code as the certificate. Ask for the certificate with the sample: a sample with no lot code is a display item, not a traceable sample. Send enough for the intended trial, plus a retention portion.

Run the trial on the sample before the production order, especially for a new mesh or a new granulation. Fill weight, flow, dust and blend uniformity are line-specific, and a certificate cannot predict them. If the trial passes, the production lot should be released against the same specification and the same lot code series.

Terms worth agreeing before the first drum

Put the specification in the purchase order and make it the release document. Agree the assay basis and the rotation conditions, the loss-on-drying limit, the mesh, the metal and micro limits, and the documents that must arrive with the lot. Agree the remedy if a release result misses the specification: replacement, credit or return, and who bears the return freight.

Agree the quantity tolerance, the shelf life remaining at delivery, and the storage condition the seller is responsible for before dispatch. Agree the Incoterm and the payment terms in writing, and keep the lot code on every document so a later question can be traced to the right drum. None of these terms is a commercial concession; they are the conditions that make the offer meaningful.

The certificate lines are explained on the COA page, the grade choices on the grade page, the storage case on the stability page, and the market rules on the compliance page. The release workflow is on the quality page, and the catalog specification is on the product page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation