02.1 Acid vs MSG

L-Glutamic acid vs monosodium glutamate: the acid, the sodium and the label

Technical document 02.1 · Reviewed 2026-11-19 · L-Glutamic Acid

On this page
  1. The acid, the salt and the water of crystallisation
  2. The numbers side by side
  3. What the sodium does to the arithmetic
  4. Taste is a difference, not a release test
  5. What the label has to say
  6. When to choose which

L-Glutamic acid and monosodium glutamate are the free acid and its monosodium salt. The acid is CAS 56-86-0, C5H9NO4, 147.13 g/mol, with no sodium; the salt is CAS 142-47-2, C5H8NNaO4, 169.11 g/mol, and about 13.6% of its mass is sodium. The two are different label ingredients, and the salt supplies roughly 87% of its mass as glutamic acid.

In one line

Monosodium glutamate is the sodium salt of glutamic acid: the sodium figure, the taste and the label name change, and the free acid is not a drop-in for it.

The acid, the salt and the water of crystallisation

Glutamic acid carries two carboxyl groups. In the free acid, both acid protons are present. In monosodium glutamate, one of those protons is replaced by a sodium ion, so the molecule is a sodium salt rather than the free acid. One proton is the whole difference on paper, and it separates the two materials into different CAS numbers and different specifications.

The salt is sold in two solid forms. The anhydrous salt, CAS 142-47-2, has a molecular weight of 169.11. The monohydrate, CAS 6106-04-3, carries one water of crystallisation and weighs 187.13 g/mol. A certificate that gives an assay and a sodium figure without naming the hydrate has left the reader to work out which powder is in the drum.

The free acid is the material this catalog supplies. It is a white crystalline powder with a 40 mesh finishing specification, and it is the ingredient named “L-glutamic acid” on a panel. The salt is bought against a different specification and declared under a different name.

The numbers side by side

L-Glutamic acid, monosodium glutamate anhydrous and the monohydrate
PropertyFree acidMSG anhydrousMSG monohydrate
CAS number56-86-0142-47-26106-04-3
FormulaC5H9NO4C5H8NNaO4C5H8NNaO4·H2O
Molecular weight147.13169.11187.13
Glutamic acid per gram1.00 gAbout 0.87 gAbout 0.79 g
Sodium per gramNoneAbout 136 mgAbout 123 mg
Water solubilityAbout 8.6 g/L at 25 °CFreely solubleFreely soluble
Label nameL-Glutamic acidMonosodium L-glutamateMonosodium L-glutamate

The table is about composition, not about interchangeability. The free acid and the salt have different pH in solution, different solubility and different masses per gram of glutamic acid. A substitution across that line is a new ingredient, not a new supplier.

What the sodium does to the arithmetic

A formula that declares 500 mg of glutamic acid needs about 575 mg of the anhydrous salt, or about 636 mg of the monohydrate. Either mass brings about 78 mg of sodium, because the sodium and the glutamate travel together in a fixed ratio. The salt weight is not the glutamic acid weight, and the sodium is not a contaminant; it is part of the ingredient and has to be declared.

On an EU label, the salt equivalent is calculated as sodium multiplied by 2.5. About 78 mg of sodium is therefore about 195 mg of salt equivalent, before any other sodium in the product. On a US label, the sodium appears in the Nutrition Facts panel. A switch from the free acid to the salt changes both the ingredient declaration and the sodium calculation, and the second change is easy to miss when the glutamic acid dose is held constant.

The salt is also freely soluble, while the free acid dissolves to only about 8.6 g/L at 25 °C. A clear drink at a high glutamate dose may need the salt for solubility alone; that is a formulation reason, not a reason to describe the two as the same material.

Taste is a difference, not a release test

At the same glutamate concentration, the free acid reads sour and the salt reads savoury. That is a property of the form and the pH, and it is one of the reasons a formulator cannot swap one for the other without tasting the result. Other amino acids taste different again: glycine reads sweet, which is why a taste panel is not an identity test.

Taste is not on the certificate and is not a specification line. This page describes it only because it differs between the two forms; it makes no flavour or functional claim, and no disease-related claim. The release tests are the assay, the rotation, the moisture and the contaminant panel, not a sensory impression.

What the label has to say

“L-Glutamic acid” and “monosodium L-glutamate” are different declarations. The first names the acid; the second names the salt, and the salt brings sodium with it. A formula that changes form needs a new ingredient declaration, a new sodium figure and a fresh check of the destination file. A specification check does not substitute for that review.

In the European Union the additive entries are separate: glutamic acid is E620 and monosodium glutamate is E621 in the list under Regulation (EC) No 1333/2008. Those entries govern an additive use, not a supplement ingredient use, and the buyer's regulatory team confirms which route applies; check the current text. In the United States the ingredient is declared by its common name, and the sodium appears in the Nutrition Facts panel. The certificate is not an authorisation in either market.

When to choose which

Choose the free acid when the label names the acid, when the formula is a dry blend or a capsule, and when no sodium is wanted from this ingredient. Choose the salt when the label names monosodium glutamate, when a clear solution at a high glutamate dose is needed, or when the sodium is acceptable and declared. The choice belongs to the formula and the label, not to the assay.

Whichever way the project goes, write the form, the CAS number and the hydrate into the specification, and put the change under written change control. A supplier can supply the free acid against this catalog; the salt is a different purchase with a different mass and a different regulatory file.

The L-glutamic acid hub lists the catalog figures; the grades page sets the acid beside the granulated grade and the racemate; the L-aspartic acid page covers the other acidic amino acid; the quality page describes how a lot is released.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation