02 Grade comparison

L-Glutamic acid grades: the free acid, the mesh and the salts

Technical document 02 · Reviewed 2026-11-19 · L-Glutamic Acid

On this page
  1. Why the form comes before the mesh
  2. The materials sold around L-glutamic acid
  3. Solubility, pH and the powder
  4. What the form does to the label arithmetic
  5. Writing the grade into the specification
  6. When another form is the better fit

The catalog material is the free acid, a white crystalline powder milled to 40 mesh. A granulated version of the same acid is the other grade inside this catalog; monosodium glutamate and DL-glutamic acid are separate products that are often discussed with it. The free acid carries both acid protons, the salt carries one sodium, and the racemate carries equal parts L and D. Each change moves the label, the mass or both.

In one line

The free acid is the ingredient; granulation only changes how it flows, and every glutamate salt is a different product with a different label.

Why the form comes before the mesh

The choice starts with the molecule, not the sieve. Glutamic acid has two carboxyl groups and one amino group. In the free acid both carboxyls are protonated. Replacing one proton with sodium gives monosodium glutamate; replacing both gives a different salt again. A salt is not a stronger or weaker version of the acid, it is another ingredient with its own CAS number and declaration.

Chirality is the second decision. L-Glutamic acid rotates plane-polarised light; the D form rotates it the other way; an equal mix reads near zero. DL-Glutamic acid is that mix, and it cannot be released against an L specification. The assay will not reveal the difference, because it counts total glutamic acid.

L-Aspartic acid is the nearest relative and still a different product. The two acids differ by one methylene group, and the comparison belongs on a separate page rather than in a grade note.

The materials sold around L-glutamic acid

Grades and adjacent products sold under a similar name
MaterialIdentityGlutamic acid per gramWhat the label saysWhere it fits
L-Glutamic acid, 40 mesh (catalog)Free acid, crystalline powder1.00 gL-Glutamic acidCapsules, tablets, dry blends
L-Glutamic acid, granulatedSame acid, larger particles1.00 gL-Glutamic acidHigh-speed presses, dust control
Monosodium L-glutamate, anhydrousSodium salt, one sodium per moleculeAbout 0.87 g, plus about 136 mg sodiumMonosodium L-glutamateSoluble salt for food matrices
Monosodium L-glutamate monohydrateSodium salt with one waterAbout 0.79 g, plus about 123 mg sodiumMonosodium L-glutamateSame salt, different mass
DL-Glutamic acid1:1 mixture of L and DAbout 0.50 g of the L formDL-Glutamic acidNot a substitute where L is named

Only the first two rows are variations of this catalog item. The salt rows are different materials and the DL row is a different specification; each brings its own paperwork, and a purchase order should say which one it means.

Solubility, pH and the powder

Solubility is modest: about 8.6 g/L at 25 °C, with a minimum near the isoelectric point at pH 3.22. A 1% slurry is therefore not a true solution at room temperature, which is why the pH specification describes a saturated preparation. Moving the pH up or down increases solubility, but it also changes the species in solution and must be declared if a salt is formed.

Granulation changes bulk flow, dust and the rate at which the powder wets out. It does not change solubility or assay. The catalog's 40 mesh cut suits capsules, tablets and dry blends; a granulated grade is specified on its own size range and density. Monosodium glutamate, by contrast, dissolves freely, so a formulator reaches for it when a clear solution is required, and accepts the sodium that comes with it.

The free acid also tastes sour, while the salt tastes savoury at the same glutamate concentration. That difference belongs to the form and the pH; it is a sensory property, not a release test, and this page makes no flavour or functional claim.

What the form does to the label arithmetic

The free acid has no counter-ion, so a milligram of acid is a milligram of glutamic acid before the assay correction. The anhydrous salt is about 87.0% glutamic acid and 13.6% sodium; the monohydrate is about 78.6% acid and 12.3% sodium. The label arithmetic follows those fractions.

Glutamic acid declared and the mass that carries it
Glutamic acid declaredFree acid massAnhydrous MSG massSodium from the salt
250 mg250 mgAbout 287 mgAbout 39 mg
500 mg500 mgAbout 575 mgAbout 78 mg
1,000 mg1,000 mgAbout 1,149 mgAbout 156 mg

For the monohydrate, 500 mg of acid is about 636 mg of powder, still carrying about 78 mg of sodium. The racemate doubles the mass again: 500 mg of L-glutamic acid needs about 1,000 mg of DL. A capsule sized on the acid will not hold the same dose from a salt without a change to the fill.

Writing the grade into the specification

  • “Name the acid and the enantiomer: L-glutamic acid, CAS 56-86-0, C5H9NO4.”
  • “Set the assay at 98.5–101.5% by HPLC and state the detector, the standard and the basis.”
  • “Require a specific rotation of +31.0° to +32.5° on the dried basis, with solvent, concentration and temperature.”
  • “Cap D-glutamic acid by chiral HPLC; a rotation alone is a screen, not a limit.”
  • “Fix loss on drying at ≤0.5% and pH at 3.0–4.0 for the stated 1% preparation.”
  • “Specify ≥95% through 40 mesh, or the granulated range and density if that grade is bought.”
  • “Keep the heavy-metal and microbiology panel, and state that no diluent is added.”

If the form is left out of the first line, the specification cannot be enforced at goods-in. “Glutamic acid” does not distinguish L from DL, acid from salt, or powder from granule.

When another form is the better fit

A salt is the better choice when the label names sodium glutamate, when the formula needs a clear solution at a high dose, or when the sodium load is acceptable and declared. The free acid is the better choice for a dry blend, a capsule or a tablet where no sodium is wanted and the acid is the named ingredient.

The racemate is never a substitute where the L form is named. If a supplier offers DL-glutamic acid against an L specification, the certificate cannot close the gap, whatever the assay says. If a beverage needs a pH adjustment to dissolve the acid, that is a formulation change with a labelling consequence, not a grade switch.

The product hub lists the catalog figures; the acid versus monosodium glutamate page takes the sodium and label question further; the COA page shows the release tests; the identity page covers the L and D evidence.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation