01 COA & batch testing

What the COA for L-alanine actually contains

Technical document 01 · Reviewed 2026-11-19 · L-Alanine

On this page
  1. The certificate as a test report
  2. Dried basis, the HPLC method and the rotation
  3. Release limit versus batch result
  4. What moves between batches
  5. When to order an outside test
  6. What to compare between suppliers

The certificate for an L-alanine lot reports appearance, identity by IR and HPLC, assay by HPLC on the dried basis, specific rotation, loss on drying, pH, heavy metals, microbiology and particle size. The assay says how much alanine is present; the rotation says it is the L-enantiomer. One figure without the other does not identify the material.

In one line

The assay and the rotation are one argument: the HPLC figure shows how much alanine the lot contains, and the specific rotation shows that it is the L-form.

The certificate as a test report

A certificate is auditable when each line carries the parameter, the method and the release limit the lot was judged against. A row that says only “conforms” records a conclusion without the evidence behind it.

The molecular half is IR and HPLC against a reference; the stereochemical half is specific rotation. Alanine has one chiral centre, so a lot can be the right molecule and the wrong enantiomer. The limits in the table are the specification; the batch COA confirms a particular pack.

Identity, assay, rotation and limits · L-alanine
ParameterMethodRelease limit
AppearanceVisualWhite crystalline powder
IdentificationIR and HPLC against a referenceConforms
AssayHPLC, dried basis98.5–101.5%
Specific rotationPolarimetry, dry basis+14.0° to +15.0°
Loss on dryingGravimetric≤0.5%
pH (1% solution)Potentiometric5.0–7.0
Heavy metalsICP-MSPb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg
MicrobiologyPlate count and absence testsAPC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent
Particle sizeSieve analysis≥95% through 40 mesh

Dried basis, the HPLC method and the rotation

Alanine has no strong ultraviolet chromophore, so the HPLC method depends on the detection mode named in the report. Pre-column derivatisation with a fluorophore, post-column reaction or a refractive-index detector are all used for amino acids; the certificate should name the column, the mobile phase and the detector settings. The assay is reported on the dried basis: the laboratory measures the powder as received and corrects for the loss on drying.

The correction is small at a 0.5% limit, but not zero. A lot at 98.2% as-is with 0.4% loss on drying calculates to 98.59% dried and passes the 98.5–101.5% window. The same 98.2% reported as-is would fail it. A lot at 98.5% as-is with the same moisture calculates to 98.90% dried. The basis is what separates the two readings.

The rotation is also reported on the dried basis, and it needs its conditions: solvent, concentration, temperature, wavelength and path length. The catalogue window is +14.0° to +15.0°. A reading of +14.6° means one thing at 20 °C in the declared solvent and something else when the conditions are missing.

The pH of a 1% solution, 5.0–7.0, is a supporting check: it is not specific to alanine, but a figure outside the window points to a different salt or residual acid. The appearance line is equally nonspecific.

Release limit versus batch result

The release limit is the acceptance boundary for the lot; the batch result is what the laboratory measured. Both belong on the page, in separate columns, with the method and the basis beside them. A result column filled with the specification range is not a result; it is a copy of the gate.

What the result column should contain · L-alanine
ParameterRelease limitResult line
Assay98.5–101.5% driedA measured percentage, with the method and the basis named
Specific rotation+14.0° to +15.0° dryA measured angle with solvent, concentration and temperature
Loss on drying≤0.5%A measured percentage
Heavy metalsPer elementA measured figure in mg/kg for each element
MicrobiologyCounts and absenceThe count and the absence statement for the lot
Particle size≥95% through 40 meshThe measured percentage through the sieve

“Passes specification” is a conclusion the reader should reach from the numbers. For heavy metals that means a figure per element, not a single total. For microbiology it means a count plus an absence statement. For rotation it means the measured angle and the conditions; a range in the result cell is a specification in disguise.

What moves between batches

The recovery and crystallisation steps move colour, pH and the trace-metal profile. Drying moves the loss on drying. Milling and sieving move the particle-size result without any change in the chemistry, so a new mill can produce a new 40 mesh figure while the assay and the rotation stay put.

Rotation is the line that should not drift. A gradual fall across lots points to a process change: a hot alkaline hold, a long residence time at high pH or a different resolution step. Racemisation is a chemistry signal, not a rounding difference, and a trend toward the lower edge deserves the chromatogram and the chiral method, not only a new certificate.

Particle size is a finishing specification, and colour is the least quantitative line. A slightly off-white batch can reflect the drying history while every chemistry line passes. The lot code on the certificate should match the pouch, the drum and the retained sample; a certificate that cannot be tied to a pack describes a material, not a delivery.

When to order an outside test

Order an independent test for a new source, a first shipment into a regulated market, a rotation result near an edge, a form or purity claim the certificate does not prove, or a disputed lot. The useful panel is IR, HPLC assay, specific rotation, loss on drying, ICP-MS for the heavy-metal panel and microbiology. Add chiral HPLC for D-alanine when enantiomeric purity matters, and XRD when the solid form is in question.

Ask the laboratory to report its limit of quantification for each screen. A “D-alanine not detected” line without a limit describes the method, not the sample. Give the referee the retained sample, the supplier's certificate and the specification, and ask for the test that separates the forms.

Chain of custody matters as much as the method: the sample tested should be the retained sample, the report should identify the lot, and the laboratory should state the assay basis. Those three details make an outside result usable in a supplier qualification.

What to compare between suppliers

Put six lines side by side: name and CAS number; assay result with its basis and method; specific rotation with its conditions; loss on drying and pH; heavy metals and microbiology; pack size and lot code. Two quotations that agree on assay but differ on rotation or basis are not describing the same powder.

The second layer is traceability: who made the lot, which process was used, and which drying and milling steps were applied. The catalogue specification is on the L-alanine product page; the tests that separate it from other amino acids are on the identity page; the particle-size choice is on the grades page; the separation is described in the methods library; the release workflow is on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation