05 Compliance

The regulatory file for L-alanine

Technical document 05 · Reviewed 2026-11-19 · L-Alanine

On this page
  1. What the file has to answer
  2. European Union
  3. United States
  4. Contaminants and the finished-product calculation
  5. Label and claims
  6. The documents in the file
  7. Checklist before the first order

L-alanine is sold as a food and supplement ingredient under the destination market's general food law and its supplement or flavouring rules. The exact route is confirmed by the buyer's regulatory team, because the same amino acid can enter a market as a food ingredient, a supplement ingredient or a flavouring substance, and those routes carry different documents and limits. This page lists the file and the checks, not a legal conclusion.

In one line

The specification describes the lot; the regulatory file shows the route, the limits and the label that apply where the finished product is sold.

What the file has to answer

L-alanine is a single amino acid, so the file is smaller: which grade and specification version, which lot and certificate, which limits and label rules, and what changes if the fermentation source or the drying step changes. The COA answers the lot, the TDS the specification and the SDS the handling; the route remains a separate question.

The supplier's file is evidence for the buyer's review; it is not a substitute for the buyer's determination. That division matters for an amino acid, because the same powder can be a supplement ingredient in one product and a flavouring component in another, and the two uses do not share a single document set. The file should say which use it covers and which specification version it describes.

The file should also contain the allergen and GMO statements, the origin record, the residual-solvent statement and any customer-specific declaration. Where a statement is not available for the lot, the gap should be named before the order, not discovered at the port. Keep a document list with version and date; an undated PDF is hard to tie to a specification revision.

European Union

The EU file is built from the specification, the contaminant results and the label. Regulation (EC) No 178/2002, Regulation (EU) No 1169/2011 and Directive 2002/46/EC apply alongside any product-specific route. For a flavouring use, the flavourings framework (Regulation (EC) No 1334/2008) applies instead of, or in addition to, the supplement rules. The buyer's regulatory team identifies the route for the destination member state and confirms that the specification matches the material being placed on the market.

The contaminant rules sit in Regulation (EU) 2023/915, as of this review. The regulation sets maximum levels for lead, cadmium and mercury in food supplements, with exceptions and notes that depend on the category. Arsenic has no harmonised maximum for food supplements in that regulation, so a customer or market limit applies. The current consolidated text is the reference; a summary on a supplier page is not.

The label review is separate from the specification review. The ingredient name on the pack has to be the name of the material that was bought, and the claims review has to be done against the authorised claims for the finished product. A certificate does not approve a claim, and a claim does not change the specification.

United States

The US file is built around the exact dietary ingredient or food substance and its intended use. The supplier should be able to name the basis it relies on and point to the supporting document; the buyer confirms that the basis covers the finished product and the claim. For a dietary supplement, the current good-manufacturing-practice rules in 21 CFR 111 apply to the finished product, and the Supplement Facts panel names the ingredient.

The label and the claim are reviewed separately from the certificate. A structure or function statement needs substantiation and the required disclaimer, and no disease-related claim is permitted for a dietary supplement. The buyer's reviewer decides which category the wording falls into; the supplier's file supplies the identity and the composition, not the claim.

Contaminants and the finished-product calculation

The catalogue panel is an ingredient specification, not a finished-product limit. The lot result has to be converted to the daily dose and compared with the limit that applies to the finished product in the destination. A lot that passes the ingredient panel can still fail the finished-product calculation when the daily dose is high.

Contaminant limits to confirm for the finished product
ParameterCatalogue limitWhat the file should show
Lead (Pb)≤3 mg/kgLot result, method and the finished-product calculation
Arsenic (As)≤2 mg/kgLot result and the agreed market or customer limit
Cadmium (Cd)≤1 mg/kgLot result and any category exception that applies
Mercury (Hg)≤0.1 mg/kgLot result and method

The calculation is simple arithmetic but easy to skip: multiply the lot result by the ingredient mass per daily dose and divide by the finished-product mass. For a capsule the mass is the fill weight; for a powder the mass is the serving. The file should show the sum, not only the lot certificate.

Label and claims

The label names the material, the quantity and, where the destination requires it, the source. For L-alanine the name should identify the L-form; a generic “alanine” is ambiguous when beta-alanine or DL-alanine is also on the market. The ingredient list, the Supplement Facts panel and the specification should use the same name and the same CAS number.

The claim review is separate. In the EU, nutrition and health claims are governed by Regulation (EC) 1924/2006, and only authorised claims can be used under the conditions attached to them. In the US, a structure or function statement is made under the dietary-supplement rules with the required disclaimer. This page makes no disease-related claim and no statement about a body function, and the supplier's file does not approve any claim.

The documents in the file

  • Specification, with the version and the date, naming L-alanine, CAS 56-41-7 and the grade.
  • Certificate of analysis for the lot, with the assay basis and the rotation conditions.
  • Technical data sheet and safety data sheet.
  • Allergen and GMO statements, and the origin record.
  • Residual-solvent statement and any customer-specific declaration.
  • A statement of the intended use and the destination market that the file covers.

The documents should agree with each other. A specification that names 40 mesh, a certificate that reports a granulated powder and a quotation that offers a different mesh describe three different purchases, even when all three carry the same product name.

Checklist before the first order

  • Specification version, CAS and the exact L-form are named.
  • COA, TDS, SDS, allergen, GMO, origin and residual-solvent statements are on file.
  • The contaminant results are converted to the finished-product dose.
  • The label and the claim have been reviewed for the destination.
  • The source, process, grade and pack are under change control.
  • The quotation, the specification and the certificate refer to the same version.

The catalogue specification is on the L-alanine product page; the certificate is explained on the COA page; the identity evidence is on the identity page; the release workflow is on the quality page; the framework notes are in the regulatory library.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation