Myo-inositol, D-chiro or a ratio: choosing an inositol grade
Inositol is sold as myo-inositol, as D-chiro-inositol, as a pre-blended 40:1 ratio of the two, and in several physical forms of the same myo powder: 40 mesh crystalline, 80 mesh milled and granulated. The isomer decides what the label can say; the physical form decides how the powder runs. The assay figure alone does not distinguish them.
The isomer and the physical form choose the grade; the assay percentage on its own does not.
Why the grade is not the assay
Three variables hide behind one grade name: the isomer, the physical presentation and the assay basis. A certificate that reads “inositol 99.0–101.0%” without naming the isomer has described an assay, not a material. Myo-inositol and D-chiro-inositol share the formula C₆H₁₂O₆ and the same molecular mass, so the same assay range can be met by either molecule.
Those variables change different things. The isomer changes the ingredient name, the label entry and the specification. The physical form changes flow, fill weight, dust and dispersion. The assay basis changes how the number is calculated and how it compares with another supplier's certificate. A grade decision that considers only the assay has left two of the three open.
The grades side by side
| Grade | What it is | Label name | Fits | Watch |
|---|---|---|---|---|
| Myo, 40 mesh | Crystalline myo-inositol; catalog grade | Myo-inositol | Capsules, tablets, sticks, blends | Standard grade; confirm assay basis |
| Myo, 80 mesh | The same powder, milled finer | Myo-inositol | Capsules, suspensions, fine blends | Fines, dust, static and caking |
| Granulated myo | Agglomerated myo-inositol | Myo-inositol | Tablets, sachets, high-speed filling | Granulation aid must be declared |
| D-chiro | A different stereoisomer | D-chiro-inositol | Products that declare the D form | Separate specification; not interchangeable |
| 40:1 blend | Myo and D-chiro pre-blended by weight | Both names | Products that declare a ratio | Homogeneity and an assay for each isomer |
Only the first three are the same molecule at different presentations. D-chiro is a separate ingredient, and the 40:1 blend is a two-ingredient formula. Reading them as grades of one powder is the commonest source of a wrong label.
Particle size, density and granulation
A 40 mesh sieve opening is about 420 µm, and the catalog limit of ≥95% through 40 mesh describes a powder that passes almost completely. An 80 mesh opening is about 177 µm, so a milled grade is materially finer. The finer powder wets out faster and fills a small capsule more evenly, but it also generates dust, carries static and cakes more readily in an open pack. Milling does not change the assay; it changes the handling.
Granulation is the opposite trade. Agglomerated particles flow better, generate less dust and can carry a higher bulk density, which helps a tablet press or a high-speed sachet filler. The granulation aid, if any, becomes part of the ingredient list and has to be declared. The assay and loss on drying still apply to the granulated material, not to the powder before granulation.
Bulk density is not on the catalog specification. If the press or the sachet filler is density-sensitive, ask for the bulk and tapped density of the actual grade, not a figure borrowed from the 40 mesh powder. A change of mesh or a granulation step is a change of specification and needs its own certificate.
What changes in the finished product
For capsules, the constraint is fill weight and flow. A 40 mesh powder is the default; a finer grade can improve content uniformity in a small capsule but may bridge in the hopper. For tablets, flow, density and compression matter more than the last decimal of the assay; a granulated grade can rescue a blend that is too light or too dusty, while a very fine grade may need a different lubricant and a slower press.
Sticks and drink mixes care about dispersion and mouthfeel. Myo-inositol is freely soluble in water, about 0.5 M at 20 °C, so dissolution is rarely the limit; the powder's wetting and the blend's flow are. A fine grade disperses quickly but can clump on contact with water if it is not agglomerated. Gummies and chews are a matrix problem: water activity, the sugar system and process temperature decide the result, and the process stays far below the 224–227 °C melting point.
A 40:1 blend adds a homogeneity problem. D-chiro is 1 part in 41 by weight, a small fraction that can segregate in a drum or a hopper. A pre-blend, a granulated blend or a fixed-order mixing step is needed, and the certificate should report an assay for each isomer, not a single total-inositol figure.
What to put in the specification
- “Myo-inositol, CAS 87-89-8; assay 99.0–101.0% by HPLC; column, mobile phase and detector named.”
- “Identity: IR spectrum conforms to reference; melting point 224–227 °C.”
- “Loss on drying ≤0.5%; residue on ignition ≤0.1%; heavy metals and microbiology as released.”
- “Particle size ≥95% through 40 mesh; 80 mesh or granulated on request; granulation aid declared.”
- “For a 40:1 blend: myo-inositol and D-chiro-inositol named separately, ratio stated by weight, each assay reported.”
A line that reads only “inositol 99%” leaves the isomer, the mesh and the basis open. The certificate has to repeat the same definitions, or the buyer is comparing a name rather than a drum.
When not to change grade
If the label claims myo-inositol and the formula has room for the powder, the 40 mesh catalog grade is enough. The 80 mesh grade earns its place only when fill weight, content uniformity or dispersion is the actual constraint. Granulation earns its place when dust, flow or density is the problem; it does not improve a blend that already runs. D-chiro belongs only where the label declares it, and a 40:1 blend belongs only where both names and the ratio can be declared and the process can handle the small fraction.
Switching grade is a revalidation, not a substitution. Fill weight, flow, taste, stability and the label all move, and the new certificate has to repeat the new definitions. A finer mesh is not a higher grade, and a ratio blend is not a stronger version of myo-inositol; it is a different formula with a different label.
The parameters behind these choices are on the COA page. The two isomers are compared on myo versus D-chiro; identity tests are on the identity page; the catalog specification is on the inositol product page. Regulatory naming is covered on the compliance page.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation