02 Grade comparison

Alpha-GPC 85% and 50%: two grades, two fill weights

Technical document 02 · Reviewed 2026-11-19 · Alpha-GPC

On this page
  1. Why the grade is a specification
  2. 50% and 85% compared
  3. Water, flow and the powder in the room
  4. Fill weight from the alpha-GPC figure
  5. Specification clauses for the grade

The catalog grade is an 85% Alpha-GPC powder: assay 85.0–90.0% by HPLC, choline 40.0–45.0% of the alpha-GPC content, water ≤3.0%. A 50% grade is a different specification, not the same powder cut in half: it carries more carrier, has its own assay and water limits, and needs about 1.7 times the fill weight for the same alpha-GPC dose. The grade belongs in the purchase order, the specification and the label review.

In one line

The 50% and 85% grades are different specifications, and the difference is measured in carrier, water and the fill weight that carries the same alpha-GPC dose.

Why the grade is a specification

Alpha-GPC is deliquescent. A concentrated powder picks up water quickly, sticks to screens and punches, and can turn from a free-flowing solid into a syrup on a humid bench. A lower-potency grade carries more carrier, which dilutes the active and can improve flow and weighing; a higher-potency grade keeps the fill weight down and puts less carrier into the capsule. Neither is a better grade in the abstract. Each is a different specification with its own assay window, water limit, bulk density and label arithmetic.

“Alpha-GPC 50%” and “Alpha-GPC 85%” are therefore not interchangeable pack sizes. A purchase order that names only “Alpha-GPC” has not chosen one, and a certificate written for one grade does not release the other.

50% and 85% compared

What changes between the 50% and 85% grades
Property85% grade (catalog)50% grade
Alpha-GPC content85.0–90.0% by HPLCA lower range, set by its own specification
Carrier shareLowerHigher
Water≤3.0%A separate limit, set by its own specification
Powder characterWhite to off-white, hygroscopicMore carrier; flow depends on the carrier
Fill for 300 mg alpha-GPCAbout 353 mgAbout 600 mg
Choline from that fillAbout 122 mgAbout 122 mg
Typical useCapsules, tablets and concentrated sticksBlends with a larger fill and easier weighing

The arithmetic in the table uses the bottom of the 85% assay window and the nominal 50%. A real fill uses the measured as-is assay from the COA, so the numbers move by a few per cent. The point is the ratio: the 50% grade needs about 1.7 times the powder, and the choline delivered is the same when the alpha-GPC dose is the same.

Water, flow and the powder in the room

The 3.0% water limit is a release criterion, not a handling allowance. An open pouch in a humid dose room takes up water; the powder becomes tacky, bridges in the feeder and picks up weight on the balance. The as-is assay falls even though the dry alpha-GPC is unchanged. A grade with more carrier can be easier to handle, but the carrier also holds water, so the water limit and the in-use window still decide.

Particle size and bulk density are not printed in the catalog for this product. They are agreed separately when the dosage form needs a specific flow or fill. Ask for the sieve and the bulk density on the lot you will run, and test the powder on the actual press or encapsulator rather than on a datasheet. A granulated format is available on request, and it is a different particle specification, not a packing choice.

Fill weight from the alpha-GPC figure

Work from the alpha-GPC figure, not the powder weight. A 300 mg alpha-GPC dose needs about 353 mg of an 85% powder or about 600 mg of a 50% powder. The choline delivered is the same in both cases, about 122 mg, because it is the same alpha-GPC dose. A 500 mg capsule filled with the 85% grade carries about 425 mg of alpha-GPC and about 172 mg of choline; the same capsule filled with the 50% grade carries about 250 mg of alpha-GPC, which is a different product.

The assay window also matters. A 353 mg fill at 85.0% carries 300 mg; the same fill at 90.0% carries about 318 mg. The label declares one number, so the fill weight and the assay specification have to be set together. Use the measured as-is assay from the COA for the weigh-up and the label worksheet, and do not use the theoretical 40.5% choline share as a substitute for the measured choline.

Specification clauses for the grade

  • “L-alpha-glycerylphosphorylcholine, CAS 28319-77-9, C8H20NO6P, molecular weight 257.22.”
  • “Grade: 85% powder; assay 85.0–90.0% by HPLC, with the basis stated.”
  • “Choline 40.0–45.0% of the alpha-GPC content; state calculated or measured.”
  • “Water ≤3.0% by Karl Fischer; heavy metals and microbiology as the catalog.”
  • “Source route, allergen statement and carrier named where the grade uses one.”
  • “Pack: 1 kg foil pouch or 25 kg fiber drum; lot code on the pack and the certificate.”

Name the grade on the purchase order and on the label. A switch between grades needs a new specification, a new fill weight and a label check; it is not a purchasing substitution. Catalog limits are on the product hub; the level-four comparison takes the choline figure and the label further; the COA page shows how the grade is reported. The HPLC method note covers the assay, the quality page covers release, and the citicoline product page shows the other choline-containing specialty ingredient.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation